X2V2 WiFi channel properties

Use the following settings for APs

Access Point Mode

• SSID – bwifi
• Hide SSID
• Security Profile No encryption

Band if using X1s and X2s

• 2.4Ghz – G only
• channel spacing 20MHz
• Fixed channel as you decide…. (2412, 2437, 2462)

Just using X2s…

• 5GHz – A/N
• Channel Width 20/40 MHz Ce
• Channel Auto

• IP Address as follows 192.168.0.7
• Subnet 255.255.0.0
• Point DNS back to itself 192.168.0.7
• No Gateway

When operating on AUTO CHANNEL at 5G, the following channels appear to regularly communicate (20MHz spacing)

Band 5GHz A/N; 20/40MHz Ce. and the frequencies it attempted were…

5180, 5200, 5220, 5240, 5260, 5280, 5300, 5320, 5745, 5765, 5785, 5805, 5825

Below image shows WINBOX and the channels recently used, the MAC address 00:0E:8E::: is the X2V2 MAC