Difference between revisions of "Base Station Configuration Guide"

Revision as of 18:09, 29 October 2014

Hardware Setup and Documentation

Unpack computer and document the following information so it can be tracked in the future. An example Dell system is shown and this information is available from the labels on the computer case. Keep written records stapled to Base Station Checklists (download here) for entire shipments at a time.

Model Number: Dell Optiplex

SVCTAG: F8S2KL1

Express service code: 33182613685

Operating System: Windows 7 Professional

Windows code: CTRB2-38DT4-QGJCK-DHHPH-FHH3G

Plug in, connect all components, and turn on the system. Place stickers by each of the ethernet ports: the stock port should be labeled "Internet Connection" while the auxiliary bay that houses the extra network card should be labeled "Idrive Wireless". The internet feed should be connected to the "Internet Connection" port, not the "Idrive Wireless" port.

<br\><br\>

Software Setup

<br\><br\>

Set BIOS to Turn On Automatically:

Turn the computer on.
While the computer is booting, repeatedly tap F2 to enter the BIOS menu
Navigate to Power Management\Auto On Time
Set it 04:00 AM, Every Day
Apply and Exit

<br\><br\>

System Identification:

The particular order and questions will vary depending on the system.

Computer Name: Idrive_base
User Name: Idriveadm
Password: 111111 (password hint: six 1’s)
Set windows to install updates automatically
Do not worry about network type or time zone, for now.

<br\><br\>

Uninstall bloatware:

Control Panel\Programs\Uninstall a Program

Uninstall all bloatware. (The programs change with every shipment, but be on the lookout for MacAfee, Dell Protected Workspace, and Dell Watchdog)

<br\><br\>

Set User Account Control (UAC):

Control Panel\System and Security\Action Center\Change User Account Control

Set track to “Never Notify” ( This is so the Idrive Transfer Tool will automatically start)

<br\><br\>

Set the Workgroup to IDRIVE:

Control Panel\System and Security\System\Advanced System Settings\Computer Name\Change...

<br\><br\>

Set Power Plan Setting:

Control Panel\System and Security\Power Options

Verify the Dell plan is selected, go to Change Plan Settings and click the "Put the Computer to Sleep" dropdown, select "Never"

<br\><br\>

Internet Connection:

Control Panel\Network and Internet\Network and Sharing Center\Change Adapter Settings

Verify internet connectivity
Should be set to automatically get its network addresses (DHCP). This should be good by default.
Right-click and rename the connection “Internet Connection” (There should be two connections, one connected and one unplugged. This step is for the connected one.)

<br\><br\>

Idrive Wireless Connection:

Control Panel\Network and Internet\Network and Sharing Center\Change Adapter Settings

Right-click and rename the connection “Idrive Wireless Connection” (There should be two connections, one connected and one unplugged. This step is for the unplugged one.)
Right-click on the Idrive Wireless Connection and select properties, select “Internet Protocol Version 4(TCP/IPv4)”, select properties
Set up the IP address to 192.168.0.10
Network mask 255.255.0.0
Default Gateway should be blank
DNS servers should be blank and NOT automatic

<br\><br\>

Set Network Order:

Control Panel\Network and Internet\Network and Sharing Center\Change Adapter Settings

Ensure that the Internet Connection network and not the Idrive Wireless Connection network is accessed for the internet.
Press ALT to make the advanced tab at the top appear
Select Advanced Settings
In the connections window use the arrows to ensure that Internet Connection is on top and the Idrive Wireless Connection is second, click OK

<br\><br\>

Show hidden icons in the Taskbar:

Click on the arrow on the taskbar in the bottom right, select customize, Click show all icons checkbox.

<br\><br\>

Disk Partitions/Raid configuration:

Taskbar

Check to make sure the RAID 1 set is working. Intel raid manager icon in lower right corner should have a green check mark

<br\><br\>

Insert the Base Station USB stick:

Copy all files to the desktop, then safely eject and remove. The following files should be on the USB stick:

idrive.cert
winbox.exe
Logo 1.png
Compressed Install Files for Microsoft SQL 2008 (SqlServer or MSSQLServer.zip)
Compressed Install Files for the latest Idrive Control Center (Idrive_server_2_6_2_live as of 9/4/2014)
Compressed Install Files for ViewPRO and AV player (MDR_Client_V2.29)
Shortcut to Idrive Base Station Installation Guide on this wiki
Shortcut to Idrive Control Center 2.0 User’s Guide on this wiki
Shortcut to Idrive X1 Installation and Operation Guide on this wiki

<br\><br\>

Move winbox.exe to C:\

Don't miss this step!

<br\><br\>

Install ViewPRO and AV player:

Run the install file from the folder you copied from the USB, you do not have to extract.

Defaults for all questions
Delete the shortcut to ViewPRO, but leave the shortcut to AV player

<br\><br\>

Install Microsoft SQL server 2008R2:

Run the install file from folder you copied from the USB, you do not have to extract.

Click on “New Installation”
Defaults for all questions EXCEPT for “Database Engine Configuration”. Set it to “Mixed Mode” and idrive2# for the password.

<br\><br\>

Set Idrive Logo as Background:

Right-click Logo 1.png and select "Set as Background"

<br\><br\>

Set Idrive Logo as Screensaver:

Move Logo 1.png to the pictures library (Start\Pictures)
Delete the Sample Pictures folder
Right-click the desktop
Select Personalize
Go to Screen Saver
In the dropdown, select Photos
Apply and Save

<br\><br\>

Set Idrive Logo as Account Picture:

Right-click the desktop
Select Personalize
Click Change your account picture
Browse...
Find and select Logo 1.png

<br\><br\>

Set Home Page to idriveglobal.com :

Launch Internet Explorer
From tools (gear in the top right) select Internet Options
Set Home page to www.idriveglobal.com

<br\><br\>

Install Acrobat Reader:

http://get.adobe.com/reader
Uncheck install google toolbar/chrome etc.
Click Download
Select Run

<br\><br\>

Install VLC Media Player:

http://www.videolan.org/vlc/index.html
Click Download
Save to Desktop
Right-click and run the installer as administrator
Defaults for all questions

<br\><br\>

Install Microsoft Security Essentials:

http://www.microsoft.com/Security_Essentials
Click Download
Select Run
Let it update and scan.
Go to settings
Set to full scan, Sunday @ 1AM, uncheck last two boxes

<br\><br\>

Install Teamviewer:

http://www.teamviewer.com/en/download
Click Download
Save to Desktop
Right-click and run the installer as administrator
Select checkboxes for Install For Remote Connection and Personal/Non-Commercial Use
Accept license agreement
Select Start Automatically with Windows (might be default now)
Create a strong password and confirm it (format #Idr79p for example, and keep it to be entered in the Idrive Admin Center)
Record the ID number that pops up
The application will launch
Go to Extras\Activate License, enter 09-31204-461595-555666 (with dashes)
Go to Extras\Options\Security
Set Windows logon to Allowed for administrators only

<br\><br\>

Setup Windows Media Player:

Click Start, search for "windows media player", and open Windows Media Player
Complete default/recommended setup

<br\><br\>

Install Dell Updates:

Click start and search "upd" to find Dell Client System Update
Search for and install any updates
NOTE: there is a link to Windows Update in the top right

<br\><br\>

Install Windows Updates:

Click start, search "wu", and press enter to open Windows Update
Search for and install any updates

<br\><br\>

Restart Computer

<br\><br\>

Specific to Customer

<br\><br\>

Set Customer’s Time Zone:

Click the clock in the bottom right
Select Change date and time settings...
Select Change time zone...
Use the drop down to select the appropriate option

<br\><br\>

Add Client to Partner List in Teamviewer:

Open Teamviewer
Log in on the right side panel (Talk to Mark if you need an account)
Click the drop down that has the icon of a person with a plus sign
Select Add remote computer
Enter in the Teamviewer ID and password specific to the base station you are working with
Set Alias to <Customer Name - Location Name>
Select Pending Activation in the Group drop down

<br\><br\>

Install Idrive Control Center:

Run the install file from the folder you copied from the USB, you do not have to extract.

Before this can be run to conclusion you will require a Validation Serial Number (License). This is generated in the Idrive Admin Center.
Find the new location in the Admin Center
Enter the license number when prompted

<br\><br\>

Create a Shipping Form:

Download template here.

Enter the customer name and address under Ship To
Enter contact name and email under Customer Contact and Account
Adjust shipped items appropriately, default is one base station and one access point
Enter computer information and RB Groove MACs (if applicable) in the box at the bottom
Save at \\IDR1\Users\Idrive_support\Support\Shipping\Base Stations with name <Customer Name - Location Name>
Print 2 copies, one for the box (Alex) and one for billing (Chrysta)

<br\><br\>

Update Location in Admin Center:

Find the location in Admin Center
Click Edit Location
In the comments box, enter the computer Service Tag, ESC, Windows Code, Serials, and RB Groove MACs
In the Remote Access fields, enter the Teamviewer ID and password

<br\><br\>

Transfer Ownership of the System to the Customer:

http://support.dell.com/support/topics/global.aspx/support/change_order/exception_tag_transfer?&~ck=anavml
Enter all required information. Info can be found in the admin center or invoice.
NOTE: Previous owner information is Company Name - IDRIVE INC, Zip Code - 93111

<br\><br\>

Allow Teamviewer and Control Center through Windows Firewall:

Click Start and search for "firewall" to find Allow a program through Windows Firewall
You may have to click Change Settings at the top
Make sure that both boxes are checked for the 2 Teamviewer programs
Make sure that both boxes are checked for the 3 Idrive Control Center programs
Click Allow another program
Click Browse...
Direct to C:\Program Files (x86)\idrive
Select the idriveControlCenter application
Allow it from the list and check both boxes for it

<br\><br\>

Shutdown, Disconnect, and Repackage the Computer:

Make sure access points and additional hardware are with or in the box
Print the Idrive Base Station Installation Guide and place it inside the box
Print the Client Weekly Maintenance Routine and place it inside the box
Both can be found on this wiki under Customer Guides
Give all materials to shipping

<br\><br\>

WiFi Equipment Setup

<br\><br\>

MikroTik Groove Setup

Use the default configuration files for configuration.

Detailed configuration instructions are available Here

<br\><br\>

BulletHP2 Setup

<br\><br\>

connections

Attach the Antenna to the Bullet prior to powering on the unit!

The Ubiquity BulletHP2 is receives its power over the shielded ethernet cable (POE).

Plug a regular cat5 cable from the ”Idrive Wireless Connection” network port of the computer into the Lan port of the POE injector.

Plug the “FTP” (Foil Wrapped Twisted Pair) cable from the POE port of the Power injector to the NanoStation.

Plug in the POE adaptor into a wall outlet.

Verify there are lights on the unit.

<br\><br\>

Network connectivity

The factory default IP address for the Bullet is 192.168.1.20 . The idrive wireless connection interface subnet must be changed to for the initial configuration of the NanoStation

Start>Control Panel>Network and Internet>Network and Sharing Center>Change adaptor settings, Right Click on the Idrive Wireless Connection and select properties, select “Internet Protocol Version 4(TCP/IPv4)” ,select properties

Set up the IP address to 192.168.1.10

When Windows 7 detects the new network (wireless router) it will ask for the network type. Chose “Public”

configuration

Launch internet explorer and enter the address http://192.168.1.20

Login as ubnt with a password of ubnt

Network Tab

Network> Network Mode: Bridge

Network> Bridge IP Address: Static

Network>Set the IP address to 192.168.0.1

Network>Set the network Mask to 255.255.0.0

Network>Set the Default Gateway to 192.168.0.1

Network>Set The Primary DNS Server to 192.168.0.1

Network> Auto IP Aliasing unchecked

Click Change

Click Apply Changes

Change Idrive Wireless Connection settings back:

Start>Control Panel>Network and Internet>Network and Sharing Center>Change adaptor settings, Right Click on the Idrive Connection and select properties, select “Internet Protocol Version 4(TCP/IPv4)” ,select properties

Set up the IP address to 192.168.0.10

Launch internet explorer and enter the address http://192.168.0.1

Login as ubnt with a password of ubnt

Wireless> Wireless Mode: Access Point

Wireless> SSID: bwifi (these are case sensitive)

Wireless> check Hide SSID

Wireless> Country Code: (Default is USA)

Wireless >IEEE 802.11 Mode: G mode Only

Wireless> Channel Width: 20Mhz

Wireless> Channel Shifting: Disabled

Wireless> Output Power: 20DBM

Wireless> Antenna Gain: 9dB

Click Change

Click Apply Changes

System> Administrator Username: admin

System Password : idrive#

Click Change

Click Apply Changes

Log back into the Ubiquity Bullet with the new password

Test download from a unit.

<br\><br\>

NanoStation 2 Setup

http://www.ubnt.com/wiki/AirOS-Quick_Setup_Guide

connections

The NanoStation is receives its power over the shielded ethernet cable (POE).

Plug a regular cat5 cable from the ”Idrive Wireless Connection” network port of the computer into the Lan port of the POE injector.

Plug the “FTP” (Foil Wrapped Twisted Pair) cable from the POE port of the Power injector to the NanoStation.

Plug in the POE adaptor into a wall outlet.

connectivity

The factory default IP address for the NanoStation2 is 192.168.1.20 . The idrive wireless connection interface settings must be changed to for the initial configuration of the NanoStation

Start>Control Panel>Network and Internet>Network and Sharing Center>Change adaptor settings, Right Click on the Idrive Connection and select properties, select “Internet Protocol Version 4(TCP/IPv4)” ,select properties

Set up the IP address to 192.168.1.10

When Windows 7 detects the new network (wireless router) it will ask for the network type. Chose “Public”

*If configuring a Nanostation2 that has been returned in a demo kit, reset the device by holding down the reset button for ~10 seconds, before adjusting Idrive connection properties*

configuration

Launch internet explorer and enter the address http://192.168.1.20

Login as ubnt with a password of ubnt

Network Tab

Network> Network Mode: Bridge

Network> Bridge IP Address: Static

Network>Set the IP address to 192.168.0.1

Network>Set the network Mask to 255.255.0.0

Network>Set the Default Gateway to 192.168.0.1

Network>Set The Primary DNS Server to 192.168.0.1

Click Change

Click Apply Changes

Change Idrive Wireless Connection settings back:

Start>Control Panel>Network and Internet>Network and Sharing Center>Change adaptor settings, Right Click on the Idrive Connection and select properties, select “Internet Protocol Version 4(TCP/IPv4)” ,select properties

Set up the IP address to 192.168.0.10

Launch internet explorer and enter the address http://192.168.0.1

Login as ubnt with a password of ubnt

Link Setup> Wireless Mode: Access Point

Link Setup> ESSID: bwifi (these are case sensitive)

Link Setup> Country Code: (Default is USA)

Link Setup >IEEE 802.11 Mode: G only

Link Setup> Output Power: 26DBM, check “Obey Regulatory Power”

20Mhz width

No Channel Switching

Click Change

Click Apply Changes

System> Administrator Username: admin

Current password: ubnt

System Password : idrive#

Confirm password

Log back into the router with the new password

Test download from a unit.

<br\><br\>

NanoStation 5 Wireless Bridge Setup

connections

The NanoStation is receives its power over the shielded ethernet cable (POE).

Plug a regular cat5 cable from the ”Idrive Wireless Connection” network port of the computer into the Lan port of the POE injector.

Plug the “FTP” (Foil Wrapped Twisted Pair) cable from the POE port of the Power injector to the NanoStation.

Plug in the POE adaptor into a wall outlet.

connectivity

The factory default IP address for the NanoStation2 is 192.168.1.20 . The idrive wireless connection interface settings must be changed to for the initial configuration of the NanoStation

Start>Control Panel>Network and Internet>Network and Sharing Center>Change adaptor settings, Right Click on the Idrive Connection and select properties, select “Internet Protocol Version 4(TCP/IPv4)” ,select properties

Set up the IP address to 192.168.1.10

When Windows 7 detects the new network (wireless router) it will ask for the network type. Chose “Public”

*If configuring a Nanostation2 that has been returned in a demo kit, reset the device by holding down the reset button for ~10 seconds, before adjusting Idrive connection properties*

configuration

Launch internet explorer and enter the address http://192.168.1.20

Login as ubnt with a password of ubnt

Network Tab

Network> Network Mode: Bridge

Network> Bridge IP Address: Static

Network>Set the IP address to 192.168.0.1

Network>Set the network Mask to 255.255.0.0

Network>Set the Default Gateway to 192.168.0.1

Network>Set The Primary DNS Server to 192.168.0.1

Click Change

Click Apply Changes

Change Idrive Wireless Connection settings back:

Start>Control Panel>Network and Internet>Network and Sharing Center>Change adaptor settings, Right Click on the Idrive Connection and select properties, select “Internet Protocol Version 4(TCP/IPv4)” ,select properties

Set up the IP address to 192.168.0.10

Launch internet explorer and enter the address http://192.168.0.1

Login as ubnt with a password of ubnt

Link Setup> Wireless Mode: Access Point

Link Setup> ESSID: bwifi (these are case sensitive)

Link Setup> Country Code: (Default is USA)

Link Setup >IEEE 802.11 Mode: G only

Link Setup> Output Power: 26DBM, check “Obey Regulatory Power”

20Mhz width

No Channel Switching

Click Change

Click Apply Changes

System> Administrator Username: admin

Current password: ubnt

System Password : idrive#

Confirm password

Log back into the router with the new password

Test download from a unit.

<br\><br\>

@@ Line 15: / Line 15: @@
 Plug in, connect all components, and turn on the system.  Place stickers by each of the ethernet ports: the stock port should be labeled "Internet Connection" while the auxiliary bay that houses the extra network card should be labeled "Idrive Wireless".  The internet feed should be connected to the "Internet Connection" port, not the "Idrive Wireless" port.
+<br\><br\>
 ==Software Setup==
+<br\><br\>
 =====Set BIOS to Turn On Automatically:=====
@@ Line 27: / Line 30: @@
 *Apply and Exit
+<br\><br\>
 =====System Identification:=====
@@ Line 37: / Line 41: @@
 *Do not worry about network type or time zone, for now.
+<br\><br\>
 =====Uninstall bloatware:=====
@@ Line 43: / Line 48: @@
 *Uninstall all bloatware.  (The programs change with every shipment, but be on the lookout for MacAfee, Dell Protected Workspace, and Dell Watchdog)
+<br\><br\>
 =====Set User Account Control (UAC):=====
@@ Line 49: / Line 55: @@
 *Set track to “Never Notify” ( This is so the Idrive Transfer Tool will automatically start)
+<br\><br\>
 =====Set the Workgroup to IDRIVE:=====
 Control Panel\System and Security\System\Advanced System Settings\Computer Name\Change...
+<br\><br\>
 =====Set Power Plan Setting:=====
@@ Line 59: / Line 67: @@
 *Verify the Dell plan is selected, go to Change Plan Settings and click the "Put the Computer to Sleep" dropdown, select "Never"
+<br\><br\>
 =====Internet Connection:=====
@@ Line 67: / Line 76: @@
 *Right-click and rename the connection “Internet Connection” (There should be two connections, one connected and one unplugged.  This step is for the connected one.)
+<br\><br\>
 =====Idrive Wireless Connection:=====
@@ Line 78: / Line 88: @@
 *DNS servers should be blank and NOT automatic
+<br\><br\>
 =====Set Network Order:=====
@@ Line 87: / Line 98: @@
 *In the connections window use the arrows to ensure that Internet Connection is on top and the Idrive Wireless Connection is second, click OK
+<br\><br\>
 =====Show hidden icons in the Taskbar:=====
@@ Line 92: / Line 104: @@
 *Click on the arrow on the taskbar in the bottom right, select customize, Click show all icons checkbox.
+<br\><br\>
 =====Disk Partitions/Raid configuration:=====
@@ Line 98: / Line 111: @@
 *Check to make sure the RAID 1 set is working. Intel raid manager icon in lower right corner should have a green check mark
+<br\><br\>
 =====Insert the Base Station USB stick:=====
@@ Line 112: / Line 126: @@
 *Shortcut to [http://wiki.idrive.pro/index.php?title=Idrive_X1_Installation_and_Operation_Guide Idrive X1 Installation and Operation Guide] on this wiki
+<br\><br\>
 =====Move winbox.exe to C:\=====
@@ Line 117: / Line 132: @@
 *Don't miss this step!
+<br\><br\>
 =====Install ViewPRO and AV player:=====
@@ Line 124: / Line 140: @@
 *Delete the shortcut to ViewPRO, but leave the shortcut to AV player
+<br\><br\>
 =====Install Microsoft SQL server 2008R2:=====
@@ Line 131: / Line 148: @@
 *Defaults for all questions EXCEPT for “Database Engine Configuration”. Set it to “Mixed Mode” and idrive2# for the password.
+<br\><br\>
 =====Set Idrive Logo as Background:=====
 *Right-click Logo 1.png and select "Set as Background"
+<br\><br\>
 =====Set Idrive Logo as Screensaver:=====
@@ Line 147: / Line 165: @@
 *Apply and Save
+<br\><br\>
 =====Set Idrive Logo as Account Picture:=====
@@ Line 156: / Line 175: @@
 *Find and select Logo 1.png
+<br\><br\>
 =====Set Home Page to <nowiki>idriveglobal.com</nowiki> :=====
@@ Line 163: / Line 183: @@
 *Set Home page to [http://www.idriveglobal.com www.idriveglobal.com]
+<br\><br\>
 =====Install Acrobat Reader:=====
@@ Line 171: / Line 192: @@
 *Select Run
+<br\><br\>
 =====Install VLC Media Player:=====
@@ Line 180: / Line 202: @@
 *Defaults for all questions
+<br\><br\>
 =====Install Microsoft Security Essentials:=====
@@ Line 190: / Line 213: @@
 *Set to full scan, Sunday @ 1AM, uncheck last two boxes
+<br\><br\>
 =====Install Teamviewer:=====
@@ Line 207: / Line 231: @@
 *Set Windows logon to Allowed for administrators only
+<br\><br\>
 =====Setup Windows Media Player:=====
@@ Line 213: / Line 238: @@
 *Complete default/recommended setup
+<br\><br\>
 =====Install Dell Updates:=====
@@ Line 220: / Line 246: @@
 *NOTE: there is a link to Windows Update in the top right
+<br\><br\>
 =====Install Windows Updates:=====
@@ Line 226: / Line 253: @@
 *Search for and install any updates
+<br\><br\>
 =====Restart Computer=====
+<br\><br\>
 ==='''Specific to Customer'''===
+<br\><br\>
 =====Set Customer’s Time Zone:=====
@@ Line 240: / Line 270: @@
 *Use the drop down to select the appropriate option
+<br\><br\>
 =====Add Client to Partner List in Teamviewer:=====
@@ Line 251: / Line 282: @@
 *Select Pending Activation in the Group drop down
+<br\><br\>
 =====Install Idrive Control Center:=====
@@ Line 259: / Line 291: @@
 *Enter the license number when prompted
+<br\><br\>
 =====Create a Shipping Form:=====
@@ Line 270: / Line 303: @@
 *Print 2 copies, one for the box (Alex) and one for billing (Chrysta)
+<br\><br\>
 =====Update Location in Admin Center:=====
@@ Line 278: / Line 312: @@
 *In the Remote Access fields, enter the Teamviewer ID and password
+<br\><br\>
 =====Transfer Ownership of the System to the Customer:=====
@@ Line 285: / Line 320: @@
 *NOTE: Previous owner information is Company Name - IDRIVE INC, Zip Code - 93111
+<br\><br\>
 =====Allow Teamviewer and Control Center through Windows Firewall:=====
@@ Line 297: / Line 333: @@
 *Select the idriveControlCenter '''application'''
 *Allow it from the list and check both boxes for it
+<br\><br\>
 =====Shutdown, Disconnect, and Repackage the Computer:=====
@@ Line 305: / Line 343: @@
 *Both can be found on this wiki under Customer Guides
 *Give all materials to shipping
+<br\><br\>
 =='''WiFi Equipment Setup'''==
+<br\><br\>
 ==='''MikroTik Groove Setup'''===
@@ Line 317: / Line 359: @@
 ==='''BulletHP2 Setup'''===
+<br\><br\>
 ====connections====
@@ Line 338: / Line 382: @@
 Verify there are lights on the unit.
+<br\><br\>
 ====Network connectivity====
@@ Line 437: / Line 482: @@
 Test download from a unit.
+<br\><br\>
 ==='''NanoStation 2 Setup'''===
@@ Line 579: / Line 626: @@
 Test download from a unit.
+<br\><br\>
 ==='''NanoStation 5 Wireless Bridge Setup'''===
@@ Line 690: / Line 739: @@
 Test download from a unit.
+<br\><br\>

Difference between revisions of "Base Station Configuration Guide"

Revision as of 18:09, 29 October 2014

Hardware Setup and Documentation

Software Setup

Set BIOS to Turn On Automatically:

System Identification:

Uninstall bloatware:

Set User Account Control (UAC):

Set the Workgroup to IDRIVE:

Set Power Plan Setting:

Internet Connection:

Idrive Wireless Connection:

Set Network Order:

Show hidden icons in the Taskbar:

Disk Partitions/Raid configuration:

Insert the Base Station USB stick:

Move winbox.exe to C:\

Install ViewPRO and AV player:

Install Microsoft SQL server 2008R2:

Set Idrive Logo as Background:

Set Idrive Logo as Screensaver:

Set Idrive Logo as Account Picture:

Set Home Page to idriveglobal.com :

Install Acrobat Reader:

Install VLC Media Player:

Install Microsoft Security Essentials:

Install Teamviewer:

Setup Windows Media Player:

Install Dell Updates:

Install Windows Updates:

Restart Computer

Specific to Customer

Set Customer’s Time Zone:

Add Client to Partner List in Teamviewer:

Install Idrive Control Center:

Create a Shipping Form:

Update Location in Admin Center:

Transfer Ownership of the System to the Customer:

Allow Teamviewer and Control Center through Windows Firewall:

Shutdown, Disconnect, and Repackage the Computer:

WiFi Equipment Setup

MikroTik Groove Setup

BulletHP2 Setup

connections

Network connectivity

NanoStation 2 Setup

NanoStation 5 Wireless Bridge Setup

Navigation menu

Search