Difference between revisions of "Base Station Configuration Guide"

From Idrive
Jump to navigation Jump to search
Line 46: Line 46:
  
  
−
'''Uninstall bloatware''' Go to Control Panel>Programs>Uninstall a Program and uninstall all bloatware.  (The programs change with every shipment, but be on the lookout for MacAfee, Dell Protected Workspace, Dell Watchdog, etc.)
+
'''Uninstall bloatware:''' Control Panel>Programs>Uninstall a Program
  
 +
*Uninstall all bloatware.  (The programs change with every shipment, but be on the lookout for MacAfee, Dell Protected Workspace, and Dell Watchdog)
  
−
*The next few steps all take place in Control Panel>System and Security
 
  
−
'''Set User Account Control (UAC) '''– Control Panel>System and Security>Action Center>Change User Account Control, Set track to “Never Notify” ( This is so the Idrive Transfer Tool will automatically start)
+
'''Set User Account Control (UAC):''' Control Panel>System and Security>Action Center>Change User Account Control
  
 +
*Set track to “Never Notify” ( This is so the Idrive Transfer Tool will automatically start)
  
−
'''Set the Workgroup to IDRIVE''' Control Panel>System and Security>System>Advanced System Settings>Computer Name>Change...
 
  
 +
'''Set the Workgroup to IDRIVE:''' Control Panel>System and Security>System>Advanced System Settings>Computer Name>Change...
  
−
'''Set Power Plan Setting''' Control Panel>System and Security>Power Options, verify the Dell plan is selected, go to Change Plan Settings and click the "Put the Computer to Sleep" dropdown, select "Never"
 
  
 +
'''Set Power Plan Setting:''' Control Panel>System and Security>Power Options
  
−
'''Internet Connection''' should be set to automatically get its network addresses (DHCP). This should be good by default.  At Control Panel>Network and Internet>Network and Sharing Center>Change Adapter Settings, right click and rename the connection “Internet Connection” (There should be two connections, one connected and one unplugged.  This step is for the connected one.)
+
*Verify the Dell plan is selected, go to Change Plan Settings and click the "Put the Computer to Sleep" dropdown, select "Never"
  
  
−
'''Idrive Wireless Connection''' Control Panel>Network and Internet>Network and Sharing Center>Change Adapter Settings, right click and rename the connection “Idrive Wireless Connection” (There should be two connections, one connected and one unplugged.  This step is for the unplugged one.)
+
'''Internet Connection:''' Control Panel>Network and Internet>Network and Sharing Center>Change Adapter Settings
  
−
*Right Click on the Idrive Wireless Connection and select properties, select “Internet Protocol Version 4(TCP/IPv4)”, select properties
+
*Should be set to automatically get its network addresses (DHCP). This should be good by default.
 +
*Right-click and rename the connection “Internet Connection” (There should be two connections, one connected and one unplugged.  This step is for the connected one.)
 +
 
 +
 
 +
'''Idrive Wireless Connection:''' Control Panel>Network and Internet>Network and Sharing Center>Change Adapter Settings
 +
 
 +
*Right-click and rename the connection “Idrive Wireless Connection” (There should be two connections, one connected and one unplugged.  This step is for the unplugged one.)
 +
*Right-click on the Idrive Wireless Connection and select properties, select “Internet Protocol Version 4(TCP/IPv4)”, select properties
 
*Set up the IP address to 192.168.0.10
 
*Set up the IP address to 192.168.0.10
 
*Network mask 255.255.'''0'''.0
 
*Network mask 255.255.'''0'''.0
Line 72: Line 80:
  
  
−
'''Disk Partitions/ Raid configuration''' – Check to make sure the RAID 1 set is working. Intel raid manager icon in lower right corner should have a green check mark
+
'''Set Network Order:''' Control Panel>Network and Internet>Network and Sharing Center>Change Adapter Settings
 +
 
 +
*Ensure that the Internet Connection network and not the Idrive Wireless Connection network is accessed for the internet.
 +
*Press ALT to make the advanced tab at the top appear
 +
*Select Advanced Settings
 +
*In the connections window use the arrows to ensure that Internet Connection is on top and the Idrive Wireless Connection is second, click OK
 +
 
 +
 
 +
'''Show hidden icons in the Taskbar:'''
 +
 
 +
*Click on the arrow on the taskbar in the bottom right, select customize, Click show all icons checkbox.
  
  
−
'''Show hidden icons in the Taskbar ''' Click on the arrow on the taskbar in the bottom right, select customize, Click show all icons checkbox.
+
'''Disk Partitions/ Raid configuration:''' Taskbar
  
 +
*Check to make sure the RAID 1 set is working. Intel raid manager icon in lower right corner should have a green check mark
  
−
'''Insert the Base Station USB stick'''  Copy all files to the desktop.  The following files should be on the USB stick:
+
 
 +
'''Insert the Base Station USB stick:'''  Copy all files to the desktop, then safely eject and remove.  The following files should be on the USB stick:
  
 
*idrive.cert
 
*idrive.cert
Line 85: Line 105:
 
*Compressed Install Files for Microsoft SQL 2008 (MSSQLServer)
 
*Compressed Install Files for Microsoft SQL 2008 (MSSQLServer)
 
*Compressed Install Files for the latest Idrive Control Center (Idrive_server_2_6_1_live as of 9/4/2014)
 
*Compressed Install Files for the latest Idrive Control Center (Idrive_server_2_6_1_live as of 9/4/2014)
−
*Compressed Install Files for Viewpro and AV player (MDR_Client_V2.29)
+
*Compressed Install Files for ViewPRO and AV player (MDR_Client_V2.29)
 
*Shortcut to Idrive Base Station Installation Guide on this wiki
 
*Shortcut to Idrive Base Station Installation Guide on this wiki
 
*Shortcut to Idrive Control Center 2.0 User’s Guide on this wiki
 
*Shortcut to Idrive Control Center 2.0 User’s Guide on this wiki
Line 91: Line 111:
  
  
−
'''Install Teamviewer '''Go to Teamviewer website [http://www.teamviewer.com/en/download http://www.teamviewer.com/en/download] download teamviewer version 9(multilanguage). Select Run, once downloaded select Install (For Remote Connection) and click Next, Select personal /non-commercial use and click Next, accept license agreement and click Next, select Start Automatically with Windows, create a strong password and confirm it (#Idrv79p for example and keep it because it must be entered in the Idrive Admin Center) then click Next, select Full access and click Next, The program installs and click on Finish. The program will launch. In the window that comes up there is an ID number under “Wait for Session” (example 123 456 789). Enter the ID and Password into the AdminCenter as well as the idrive support  Teamviewer account.
+
'''Install ViewPRO and AV player:''' Run the install file from the folder you copied from the USB, you do not have to extract.
 +
 
 +
*Defaults for all questions
 +
 
  
 +
'''Install Microsoft SQL server 2008R2:''' Run the install file from folder you copied from the USB, you do not have to extract.
  
−
'''Activate Teamviewer License'''- At the top of teamviewer select Extras>Activate License. The license number is 09-31204-461595-555666
+
*Click on “New Installation”
  
 +
*Defaults for all questions EXCEPT for “Database Engine Configuration”. Set it to “Mixed Mode” and idrive2# for the password.
  
−
'''Set windows logon Allowed for administrators''' – Extras> Options> Security
 
  
 +
'''Set Idrive Logo as Background:'''
  
−
'''Set Customer’s Time zone ''' -
+
*Right-click Logo 1.png and select "Set as Background"
 +
 
 +
 
 +
'''Set Idrive Logo as Screensaver:'''
  
−
Start>Control Panel> Clock, Language, Region>Date and Time>Change Time zone
+
*Move Logo 1.png to the pictures library (Start>Pictures)
 +
*Delete the Sample Pictures folder
 +
*Right-click the desktop
 +
*Select Personalize
 +
*Go to Screen Saver
 +
*In the dropdown, select Photos
 +
*Apply and Save
  
  
−
'''Networks''' - One of the network connections will be for the Internet and the other for the idrive Wireless Connection. The Silver port should be used for internet, the black for wireless network.A label should be applied to the back of the system to identify each network connection
+
'''Set Idrive Logo as Account Picture:'''
  
 +
*Right-click the desktop
 +
*Select Personalize
 +
*Click Change your account picture
 +
*Browse...
 +
*Find and select Logo 1.png
  
  
 +
'''Set Home Page to <nowiki>idriveglobal.com</nowiki> :'''
  
−
Label each network adaptor on the back of the machine so the customer will know which connection is which. (“idrive wireless connection” “internet connection”)
+
*Launch Internet Explorer
 +
*From tools (gear in the top right) select Internet Options
 +
*Set Home page to [http://www.idriveglobal.com www.idriveglobal.com]
  
  
−
'''Set Network Order''' – Ensure that the Internet network and not the Idrive network is accessed for the internet. Start&gt;Network, select Network and Sharing Center, select Change Adaptor Settings, press ALT to make the advanced tab at the top appear, select advanced settings, in the connections window ensure that the internet connection is on top and the idrive wireless connection is second, click OK
+
'''Install Acrobat Reader:'''
  
 +
*[http://get.adobe.com/reader http://get.adobe.com/reader]
 +
*Uncheck install google toolbar/chrome etc.
 +
*Click Download
 +
*Select Run
  
  
 +
'''Install VLC Media Player:'''
  
−
'''run Windows Update''':
+
*</nowiki>http://www.videolan.org/vlc/index.html</nowiki>
 +
*Click Download
 +
*Save to Desktop
 +
*Right-click and run the installer as administrator
 +
*Defaults for all questions
  
−
Start&gt;All Programs&gt;Windows Update, Accept the agreement, check the boxes for:  Recommended updates, Who can install updates, Microsoft updates. When finished restart system
 
  
 +
'''Install Microsoft Security Essentials:'''
  
−
'''Install Microsoft Security Essentials''' [http://www.microsoft.com/Security_Essentials http://www.microsoft.com/Security_Essentials] , select download, select run, select finish and an update will download and the system will be scanned. Set to full scan, Saturday
+
*[http://www.microsoft.com/Security_Essentials http://www.microsoft.com/Security_Essentials]
 +
*Click Download
 +
*Select Run
 +
*Let it update and scan.  
 +
*Go to settings
 +
*Set to full scan, Sunday @ 1AM, uncheck last two boxes
  
  
 +
'''Install Teamviewer:'''
  
 +
*[http://www.teamviewer.com/en/download http://www.teamviewer.com/en/download]
 +
*Click Download
 +
*Save to Desktop
 +
*Right-click and run the installer as administrator
 +
*Select checkboxes for Install For Remote Connection and Personal/Non-Commercial Use
 +
*Accept license agreement
 +
*Select Start Automatically with Windows (might be default now)
 +
*Create a strong password and confirm it (format #Idr79p for example and keep it because it must be entered in the Idrive Admin Center
 +
*Record the ID number that pops up
 +
*The application will launch
 +
*Go to Extras>Activate License, enter 09-31204-461595-555666 (with dashes)
 +
*Go to Extras>Options>Security
 +
*Set Windows logon to Allowed for administrators only
  
  
 +
'''Install Dell Updates:'''
  
−
'''Install Acrobat Reader''' - [http://get.adobe.com/reader http://get.adobe.com/reader]  uncheck install google toolbar/chrome etc, select download at the bottom,  Close download manager when done.
+
*Click start and search "upd" to find Dell Client System Update
 +
*Search for and install any updates
 +
*NOTE: there is a link to Windows Update in the top right
  
  
 +
'''Install Windows Updates:'''
  
−
'''Set default web page to <nowiki>Idriveglobal.com</nowiki> – '''Launch Internet Explorer, depress the alt key to display tools, from tools select Internet Options, Set Home page to [http://www.idriveglobal.com www.idriveglobal.com]
+
*Click start and search "upd" to find Windows Update
 +
*Search for and install any updates
  
  
 +
'''Restart Computer'''
  
−
'''Install VLC Media Player - ''' </nowiki>http://www.videolan.org/vlc/index.html</nowiki>
 
  
 +
=='''Specific to Customer'''==
  
  
−
'''Install the Idrive desktop logo'''.''' Logo <nowiki>1.pn</nowiki>g''' – this is for the background for the desktop of the base stations. Copy&nbsp;it to a known location on the system. Right click on the desktop and pick Personalize, select Desktop background and browse to where you placed the Logo
+
'''Set Customer’s Time zone ''' -
  
 +
Start&gt;Control Panel&gt; Clock, Language, Region&gt;Date and Time&gt;Change Time zone
  
  
−
'''Change account user picture to Idrive logo''' - Start&gt;Control Panel&gt;User Accounts&gt;User Accounts&gt;Change Account picture and browse to where you placed the Logo
+
'''run Windows Update''':
 +
 
 +
Start&gt;All Programs&gt;Windows Update, Accept the agreement, check the boxes for:  Recommended updates, Who can install updates, Microsoft updates. When finished restart system
  
  
Line 160: Line 239:
  
  
−
'''Install Microsoft SQL server 2008R2''' –
 
−
 
−
Click on “New Installation”
 
−
 
−
Defaults for all questions EXCEPT for “Database Engine Configuration”. Set it to “Mixed Mode” and idrive2# for the password.
 
  
 
'''Install Latest Version of Idrive 2.0 Control Center - '''Before this can be run to conclusion you will require a Validation Serial Number (License). This is generated&nbsp;in the Idrive Admin Center.  To install the Control Center double click <nowiki>download-file-idrive.zi</nowiki>p\idrive\<nowiki>setup.ex</nowiki>e click next, enter Validation Serial Number click Done.
 
'''Install Latest Version of Idrive 2.0 Control Center - '''Before this can be run to conclusion you will require a Validation Serial Number (License). This is generated&nbsp;in the Idrive Admin Center.  To install the Control Center double click <nowiki>download-file-idrive.zi</nowiki>p\idrive\<nowiki>setup.ex</nowiki>e click next, enter Validation Serial Number click Done.

Revision as of 17:49, 4 September 2014

General Guideline for Basic Base Station configuration with either MikroTik Groove, NanoStation2 or Ubiquity Bullet (3/17/14)

Basic Computer Documentation

Unpack computer and document the following information so it can be tracked in the future. An example Dell system is shown and this information is available from the labels on the computer case.

  • Model Number: Dell Optiplex
  • SVCTAG: F8S2KL1
  • Express service code: 33182613685
  • Operating System: Windows 7 Professional
  • Windows code: CTRB2-38DT4-QGJCK-DHHPH-FHH3G


Basic Computer setup

(Local person Required)

Plug in, connect all components, and turn on the system. Place stickers by each of the ethernet ports: the stock port should be labeled "Internet Connection" while the auxiliary bay that houses the extra network card should be labeled "Idrive Wireless". The internet feed should be connected to the "Internet Connection" port, not the "Idrive Wireless" port.


Basic initial system identification

The particular order and questions will vary depending on the system.

  • Computer Name: Idrive_base
  • User Name: Idriveadm
  • Password: 111111

(password hint: six 1’s)

  • Set windows to install updates automatically
  • Do not worry about network type or time zone, for now.
The computer should eventually come to a point where you can log in as Idriveadm
Log on and verify internet connectivity

Idrive Base Station Setup

Uninstall bloatware: Control Panel>Programs>Uninstall a Program

  • Uninstall all bloatware. (The programs change with every shipment, but be on the lookout for MacAfee, Dell Protected Workspace, and Dell Watchdog)


Set User Account Control (UAC): Control Panel>System and Security>Action Center>Change User Account Control

  • Set track to “Never Notify” ( This is so the Idrive Transfer Tool will automatically start)


Set the Workgroup to IDRIVE: Control Panel>System and Security>System>Advanced System Settings>Computer Name>Change...


Set Power Plan Setting: Control Panel>System and Security>Power Options

  • Verify the Dell plan is selected, go to Change Plan Settings and click the "Put the Computer to Sleep" dropdown, select "Never"


Internet Connection: Control Panel>Network and Internet>Network and Sharing Center>Change Adapter Settings

  • Should be set to automatically get its network addresses (DHCP). This should be good by default.
  • Right-click and rename the connection “Internet Connection” (There should be two connections, one connected and one unplugged. This step is for the connected one.)


Idrive Wireless Connection: Control Panel>Network and Internet>Network and Sharing Center>Change Adapter Settings

  • Right-click and rename the connection “Idrive Wireless Connection” (There should be two connections, one connected and one unplugged. This step is for the unplugged one.)
  • Right-click on the Idrive Wireless Connection and select properties, select “Internet Protocol Version 4(TCP/IPv4)”, select properties
  • Set up the IP address to 192.168.0.10
  • Network mask 255.255.0.0
  • Default Gateway should be blank
  • DNS servers should be blank and NOT automatic


Set Network Order: Control Panel>Network and Internet>Network and Sharing Center>Change Adapter Settings

  • Ensure that the Internet Connection network and not the Idrive Wireless Connection network is accessed for the internet.
  • Press ALT to make the advanced tab at the top appear
  • Select Advanced Settings
  • In the connections window use the arrows to ensure that Internet Connection is on top and the Idrive Wireless Connection is second, click OK


Show hidden icons in the Taskbar:

  • Click on the arrow on the taskbar in the bottom right, select customize, Click show all icons checkbox.


Disk Partitions/ Raid configuration: Taskbar

  • Check to make sure the RAID 1 set is working. Intel raid manager icon in lower right corner should have a green check mark


Insert the Base Station USB stick: Copy all files to the desktop, then safely eject and remove. The following files should be on the USB stick:

  • idrive.cert
  • winbox.exe
  • Logo 1.png
  • Compressed Install Files for Microsoft SQL 2008 (MSSQLServer)
  • Compressed Install Files for the latest Idrive Control Center (Idrive_server_2_6_1_live as of 9/4/2014)
  • Compressed Install Files for ViewPRO and AV player (MDR_Client_V2.29)
  • Shortcut to Idrive Base Station Installation Guide on this wiki
  • Shortcut to Idrive Control Center 2.0 User’s Guide on this wiki
  • Shortcut to Idrive X1 Installation and Operation Guide on this wiki


Install ViewPRO and AV player: Run the install file from the folder you copied from the USB, you do not have to extract.

  • Defaults for all questions


Install Microsoft SQL server 2008R2: Run the install file from folder you copied from the USB, you do not have to extract.

  • Click on “New Installation”
  • Defaults for all questions EXCEPT for “Database Engine Configuration”. Set it to “Mixed Mode” and idrive2# for the password.


Set Idrive Logo as Background:

  • Right-click Logo 1.png and select "Set as Background"


Set Idrive Logo as Screensaver:

  • Move Logo 1.png to the pictures library (Start>Pictures)
  • Delete the Sample Pictures folder
  • Right-click the desktop
  • Select Personalize
  • Go to Screen Saver
  • In the dropdown, select Photos
  • Apply and Save


Set Idrive Logo as Account Picture:

  • Right-click the desktop
  • Select Personalize
  • Click Change your account picture
  • Browse...
  • Find and select Logo 1.png


Set Home Page to idriveglobal.com :

  • Launch Internet Explorer
  • From tools (gear in the top right) select Internet Options
  • Set Home page to www.idriveglobal.com


Install Acrobat Reader:


Install VLC Media Player:


Install Microsoft Security Essentials:


Install Teamviewer:

  • http://www.teamviewer.com/en/download
  • Click Download
  • Save to Desktop
  • Right-click and run the installer as administrator
  • Select checkboxes for Install For Remote Connection and Personal/Non-Commercial Use
  • Accept license agreement
  • Select Start Automatically with Windows (might be default now)
  • Create a strong password and confirm it (format #Idr79p for example and keep it because it must be entered in the Idrive Admin Center
  • Record the ID number that pops up
  • The application will launch
  • Go to Extras>Activate License, enter 09-31204-461595-555666 (with dashes)
  • Go to Extras>Options>Security
  • Set Windows logon to Allowed for administrators only


Install Dell Updates:

  • Click start and search "upd" to find Dell Client System Update
  • Search for and install any updates
  • NOTE: there is a link to Windows Update in the top right


Install Windows Updates:

  • Click start and search "upd" to find Windows Update
  • Search for and install any updates


Restart Computer


Specific to Customer

Set Customer’s Time zone -

Start>Control Panel> Clock, Language, Region>Date and Time>Change Time zone


run Windows Update:

Start>All Programs>Windows Update, Accept the agreement, check the boxes for: Recommended updates, Who can install updates, Microsoft updates. When finished restart system


(From Here down it is customer specific)


*For Demo Unit, Uninstall Any Pre-existing Idrive Software – for a returned demo unit, the software must be removed and re-installed to ensure the latest versions/updates.

Start>Programs>idrive>uninstall and click finish to safely remove software. Then go to control panel>hard drive>program files(86x)>idrive folder and delete the entire folder. Any setup or informational data in this file will be reloaded onto computer when control center is re-installed


Uninstall Microsoft SQL Server 2005 – Control panel> Programs> uninstall


Install Latest Version of Idrive 2.0 Control Center - Before this can be run to conclusion you will require a Validation Serial Number (License). This is generated in the Idrive Admin Center. To install the Control Center double click download-file-idrive.zip\idrive\setup.exe click next, enter Validation Serial Number click Done.


Download and save WinBox Configuration tool for RouterOS (Please save this on the C:\ root file not the desktop)

[Win Box download] This program is now necessary for client location configuration of the MikroTik RB Groove Access Points


Create Shortcuts to the 3 Idrive manuals on the desktop –

Base Station installation Guide http://wiki.idrive.pro/index.php?title=Idrive_Base_Station_Installation_Guide

Idrive Control Center 2.0 User’s Guide http://wiki.idrive.pro/index.php?title=Idrive_Control_Center_2.0_User%E2%80%99s_Guide

Idrive X1 Installation and Operation Guide http://wiki.idrive.pro/index.php?title=Idrive_X1_Installation_and_Operation_Guide

Organize Icons from left to right near bottom of desktop screen.


Copy The Idrive idrive.cert file to The desktop – Place it next to the manual shortcuts on the Desktop


Transfer ownership of the system to the customer –

http://support.dell.com/support/topics/global.aspx/support/change_order/exception_tag_transfer?&~ck=anavml


Remove previous shipping labels from the Boxes.

WiFi Equipment Setup

MikroTik Groove Setup

Use the default configuration files for configuration.

Detailed configuration instructions are available Here

<br\><br\>

BulletHP2 Setup

connections

Attach the Antenna to the Bullet prior to powering on the unit!


The Ubiquity BulletHP2 is receives its power over the shielded ethernet cable (POE).


Plug a regular cat5 cable from the ”Idrive Wireless Connection” network port of the computer into the Lan port of the POE injector.


Plug the “FTP” (Foil Wrapped Twisted Pair) cable from the POE port of the Power injector to the NanoStation.


Plug in the POE adaptor into a wall outlet.


Verify there are lights on the unit.


Network connectivity

The factory default IP address for the Bullet is 192.168.1.20 . The idrive wireless connection interface subnet must be changed to for the initial configuration of the NanoStation

Start>Control Panel>Network and Internet>Network and Sharing Center>Change adaptor settings, Right Click on the Idrive Wireless Connection and select properties, select “Internet Protocol Version 4(TCP/IPv4)” ,select properties

Set up the IP address to 192.168.1.10


When Windows 7 detects the new network (wireless router) it will ask for the network type. Chose “Public”


configuration

Launch internet explorer and enter the address http://192.168.1.20

Login as ubnt with a password of ubnt


Network Tab


Network> Network Mode: Bridge

Network> Bridge IP Address: Static

Network>Set the IP address to 192.168.0.1

Network>Set the network Mask to 255.255.0.0

Network>Set the Default Gateway to 192.168.0.1

Network>Set The Primary DNS Server to 192.168.0.1

Network> Auto IP Aliasing unchecked


Click Change

Click Apply Changes


Change Idrive Wireless Connection settings back:


Start>Control Panel>Network and Internet>Network and Sharing Center>Change adaptor settings, Right Click on the Idrive Connection and select properties, select “Internet Protocol Version 4(TCP/IPv4)” ,select properties

Set up the IP address to 192.168.0.10


Launch internet explorer and enter the address http://192.168.0.1

Login as ubnt with a password of ubnt


Wireless> Wireless Mode: Access Point

Wireless> SSID: bwifi (these are case sensitive)

Wireless> check Hide SSID

Wireless> Country Code: (Default is USA)

Wireless >IEEE 802.11 Mode: G mode Only

Wireless> Channel Width: 20Mhz

Wireless> Channel Shifting: Disabled

Wireless> Output Power: 20DBM

Wireless> Antenna Gain: 9dB


Click Change

Click Apply Changes


System> Administrator Username: admin

System Password : idrive#


Click Change

Click Apply Changes


Log back into the Ubiquity Bullet with the new password


Test download from a unit.

NanoStation 2 Setup

http://www.ubnt.com/wiki/AirOS-Quick_Setup_Guide


connections


The NanoStation is receives its power over the shielded ethernet cable (POE).


Plug a regular cat5 cable from the ”Idrive Wireless Connection” network port of the computer into the Lan port of the POE injector.


Plug the “FTP” (Foil Wrapped Twisted Pair) cable from the POE port of the Power injector to the NanoStation.


Plug in the POE adaptor into a wall outlet.


connectivity


The factory default IP address for the NanoStation2 is 192.168.1.20 . The idrive wireless connection interface settings must be changed to for the initial configuration of the NanoStation


Start>Control Panel>Network and Internet>Network and Sharing Center>Change adaptor settings, Right Click on the Idrive Connection and select properties, select “Internet Protocol Version 4(TCP/IPv4)” ,select properties

Set up the IP address to 192.168.1.10


When Windows 7 detects the new network (wireless router) it will ask for the network type. Chose “Public”


*If configuring a Nanostation2 that has been returned in a demo kit, reset the device by holding down the reset button for ~10 seconds, before adjusting Idrive connection properties*


configuration


Launch internet explorer and enter the address http://192.168.1.20

Login as ubnt with a password of ubnt


Network Tab


Network> Network Mode: Bridge

Network> Bridge IP Address: Static

Network>Set the IP address to 192.168.0.1

Network>Set the network Mask to 255.255.0.0

Network>Set the Default Gateway to 192.168.0.1

Network>Set The Primary DNS Server to 192.168.0.1


Click Change

Click Apply Changes



Change Idrive Wireless Connection settings back:


Start>Control Panel>Network and Internet>Network and Sharing Center>Change adaptor settings, Right Click on the Idrive Connection and select properties, select “Internet Protocol Version 4(TCP/IPv4)” ,select properties

Set up the IP address to 192.168.0.10


Launch internet explorer and enter the address http://192.168.0.1

Login as ubnt with a password of ubnt


Link Setup> Wireless Mode: Access Point

Link Setup> ESSID: bwifi (these are case sensitive)

Link Setup> Country Code: (Default is USA)

Link Setup >IEEE 802.11 Mode: G only

Link Setup> Output Power: 26DBM, check “Obey Regulatory Power”

20Mhz width

No Channel Switching


Click Change

Click Apply Changes



System> Administrator Username: admin

Current password: ubnt

System Password : idrive#

Confirm password


Log back into the router with the new password


Test download from a unit.

Retrieved from "https://admincenter.idriveglobal.com/wiki/index.php?title=Base_Station_Configuration_Guide&oldid=3327"