Difference between revisions of "X2V2 WiFi channel properties"
Jump to navigation
Jump to search
| Line 30: | Line 30: | ||
5180, 5200, 5220, 5240, 5260, 5280, 5300, 5320, 5745, 5765, 5785, 5805, 5825 | 5180, 5200, 5220, 5240, 5260, 5280, 5300, 5320, 5745, 5765, 5785, 5805, 5825 | ||
| − | + | Below image shows WINBOX and the channels recently used, the MAC address 00:0E:8E::: is the X2V2 MAC | |
[[File:5GChannels.JPG]] | [[File:5GChannels.JPG]] | ||
Revision as of 21:00, 18 April 2019
Use the following settings for APs
Access Point Mode
- SSID – bwifi
- Hide SSID
- Security Profile No encryption
Band if using X1s and X2s
- 2.4Ghz – G only
- channel spacing 20MHz
- Fixed channel as you decide…. (2412, 2437, 2462)
Just using X2s…
- 5GHz – A/N
- Channel Width 20/40 MHz Ce
- Channel Auto
- IP Address as follows 192.168.0.7
- Subnet 255.255.0.0
- Point DNS back to itself 192.168.0.7
- No Gateway
When operating on AUTO CHANNEL at 5G, the following channels appear to regularly communicate (20MHz spacing)
Band 5GHz A/N; 20/40MHz Ce. and the frequencies it attempted were…
5180, 5200, 5220, 5240, 5260, 5280, 5300, 5320, 5745, 5765, 5785, 5805, 5825
Below image shows WINBOX and the channels recently used, the MAC address 00:0E:8E::: is the X2V2 MAC
