Difference between revisions of "X2V2 WiFi channel properties"
Jump to navigation
Jump to search
| Line 27: | Line 27: | ||
Band 5GHz A/N; 20/40MHz Ce. | Band 5GHz A/N; 20/40MHz Ce. | ||
and the frequencies it attempted were… 5180, 5200, 5220, 5240, 5260, 5280, 5300, 5320, 5745, 5765, 5785, 5805, 5825 | and the frequencies it attempted were… 5180, 5200, 5220, 5240, 5260, 5280, 5300, 5320, 5745, 5765, 5785, 5805, 5825 | ||
| + | |||
| + | [[File:5GChannels.JPG]] | ||
Revision as of 20:57, 18 April 2019
Use the following settings for APs
Access Point Mode
- SSID – bwifi
- Hide SSID
- Security Profile No encryption
Band if using X1s and X2s
- 2.4Ghz – G only
- channel spacing 20MHz
- Fixed channel as you decide…. (2412, 2437, 2462)
Just using X2s…
- 5GHz – A/N
- Channel Width 20/40 MHz Ce
- Channel Auto
- IP Address as follows 192.168.0.7
- Subnet 255.255.0.0
- Point DNS back to itself 192.168.0.7
- No Gateway
When operating on AUTO CHANNEL at 5G, the following channels appear to regularly communicate (20MHz spacing)
Band 5GHz A/N; 20/40MHz Ce. and the frequencies it attempted were… 5180, 5200, 5220, 5240, 5260, 5280, 5300, 5320, 5745, 5765, 5785, 5805, 5825
