Difference between revisions of "Base Station Configuration Guide"

From Idrive
Jump to navigation Jump to search
Line 3: Line 3:
 
<br\><br\>
 
<br\><br\>
  
−
==='''Basic Computer Documentation '''=== (Local person Required)
+
==Basic Computer Documentation==
−
 
 
  
  
 
Unpack computer and document the following information so it can be tracked in the future. An example Dell system is shown and this information  is available from the labels on the computer case.
 
Unpack computer and document the following information so it can be tracked in the future. An example Dell system is shown and this information  is available from the labels on the computer case.
  
 +
*'''Model Number''': Dell Optiplex   
  
 +
*'''SVCTAG''': F8S2KL1
  
−
'''Model Number''': Dell Optiplex   
+
*'''Express service code''': 33182613685
  
−
'''SVCTAG''': F8S2KL1
+
*'''Operating System''': Windows 7 Professional
  
−
'''Express service code''': 33182613685
+
*'''Windows code''': CTRB2-38DT4-QGJCK-DHHPH-FHH3G
  
−
'''Operating System''': Windows 7 Professional
+
<br\><br\>
  
−
'''Windows code''': CTRB2-38DT4-QGJCK-DHHPH-FHH3G
 
  
 +
===Basic Computer setup===
  
−
<br\><br\>
+
(Local person Required)
  
  
−
=='''Basic Computer setup '''== (Local person Required)
 
  
 +
Set up and turn on the system.
  
  
−
Set up and turn on the system.
 
  
 +
===Basic initial system identification===
  
 +
The particular order and questions will vary depending on the system.
  
−
==='''Basic initial system identification-'''=== The particular order and questions will vary depending on the system. Here are my base recommendations:
+
*'''Computer Name:''' Idrive_base
  
−
Computer Name: Idrive_base
+
*'''User Name:''' Idriveadm
  
−
User Name: Idriveadm
+
*'''Password:''' 111111
−
 
 
−
Password: 111111
 
  
 
(password hint: six 1’s)
 
(password hint: six 1’s)
  
−
Set windows to install updates automatically
+
*Set windows to install updates automatically
  
−
The computer should eventually come to a point where you can log in as Idriveadm
+
::The computer should eventually come to a point where you can log in as Idriveadm
−
 
 
−
Log on and verify internet connectivity
 
  
 +
::Log on and verify internet connectivity
  
  
Line 55: Line 54:
  
 
'''Install The Dell updates '''(you will be prompted for this the first time the system comes up).
 
'''Install The Dell updates '''(you will be prompted for this the first time the system comes up).
−
 
  
  
Line 61: Line 59:
  
 
Start&gt;Control Panel&gt;System and Security&gt;Power Options , For the “Dell Plan” select change plan setting and under “Plugged In” set the  “Put the computer to sleep” option to never. Select save changes
 
Start&gt;Control Panel&gt;System and Security&gt;Power Options , For the “Dell Plan” select change plan setting and under “Plugged In” set the  “Put the computer to sleep” option to never. Select save changes
−
 
  
  
 
'''Set User Account Control (UAC) '''– Control Panel&gt; System and Security&gt;Action Center&gt;Change User Account Control , Set track to “Never Notify” ( This is so the Idrive Transfer Tool will automatically start)
 
'''Set User Account Control (UAC) '''– Control Panel&gt; System and Security&gt;Action Center&gt;Change User Account Control , Set track to “Never Notify” ( This is so the Idrive Transfer Tool will automatically start)
−
 
  
  
 
'''Set the Workgroup to IDRIVE''' Control panel&gt; System &gt;change settings
 
'''Set the Workgroup to IDRIVE''' Control panel&gt; System &gt;change settings
−
 
  
  
 
'''Reboot system''' ( after Dell updates complete)
 
'''Reboot system''' ( after Dell updates complete)
−
 
−
 
−
 
  
  
 
'''Install Teamviewer '''Go to Teamviewer website [http://www.teamviewer.com/en/download/dyngate.aspx#version5 http://www.teamviewer.com/en/download/dyngate.aspx#version5] download teamviewer version 5.1.13999(multilanguage). Select Run, once downloaded select Install (Default) and click Next, Select personal /non-commercial use and click Next, accept license agreement and click Next, select Start Automatically with Windows, create a strong password and confirm it (#Idrv79p for example and keep it because it must be entered in the Idrive Admin Center) then click Next, select Full access and click Next, The program installs and click on Finish. The program will launch. In the window that comes up there is an ID number under “Wait for Session” (example 123 456 789). Enter the ID and Password into the AdminCenter as well as the idrive support  Teamviewer account.  
 
'''Install Teamviewer '''Go to Teamviewer website [http://www.teamviewer.com/en/download/dyngate.aspx#version5 http://www.teamviewer.com/en/download/dyngate.aspx#version5] download teamviewer version 5.1.13999(multilanguage). Select Run, once downloaded select Install (Default) and click Next, Select personal /non-commercial use and click Next, accept license agreement and click Next, select Start Automatically with Windows, create a strong password and confirm it (#Idrv79p for example and keep it because it must be entered in the Idrive Admin Center) then click Next, select Full access and click Next, The program installs and click on Finish. The program will launch. In the window that comes up there is an ID number under “Wait for Session” (example 123 456 789). Enter the ID and Password into the AdminCenter as well as the idrive support  Teamviewer account.  
−
 
  
  
 
'''Activate Teamviewer License'''- At the top of teamviewer select Extras&gt;Activate License. The license number is 09-31004-216139-269687
 
'''Activate Teamviewer License'''- At the top of teamviewer select Extras&gt;Activate License. The license number is 09-31004-216139-269687
−
 
  
  
 
'''Set windows logon Allowed for administrators''' – Extras&gt; Options&gt; Security
 
'''Set windows logon Allowed for administrators''' – Extras&gt; Options&gt; Security
−
 
  
  
Line 93: Line 82:
  
 
Start&gt;Control Panel&gt; Clock, Language, Region&gt;Date and Time&gt;Change Time zone  
 
Start&gt;Control Panel&gt; Clock, Language, Region&gt;Date and Time&gt;Change Time zone  
−
 
  
  
 
'''Networks''' - One of the network connections will be for the Internet and the other for the idrive Wireless Connection. The Silver port should be used for internet, the black for wireless network.A label should be applied to the back of the system to identify each network connection  
 
'''Networks''' - One of the network connections will be for the Internet and the other for the idrive Wireless Connection. The Silver port should be used for internet, the black for wireless network.A label should be applied to the back of the system to identify each network connection  
−
 
  
  
 
'''Internet connection''' should be set to automatically get its network addresses (DHCP). This should be good by default. Rename the connection “Internet Connection” Start&gt;Control Panel&gt;Network and Internet&gt;Network and Sharing Center&gt;Change adaptor settings, Right Click on the connection and select rename
 
'''Internet connection''' should be set to automatically get its network addresses (DHCP). This should be good by default. Rename the connection “Internet Connection” Start&gt;Control Panel&gt;Network and Internet&gt;Network and Sharing Center&gt;Change adaptor settings, Right Click on the connection and select rename
−
 
  
  
Line 109: Line 95:
  
 
Set up the IP address to 192.168.0.10, Network mask 255.255.'''0'''.0 , default gateway Blank and DNS servers to NOT automatic and blank settings.  
 
Set up the IP address to 192.168.0.10, Network mask 255.255.'''0'''.0 , default gateway Blank and DNS servers to NOT automatic and blank settings.  
−
 
  
  
 
Label each network adaptor on the back of the machine so the customer will know which connection is which. (“idrive wireless connection” “internet connection”)
 
Label each network adaptor on the back of the machine so the customer will know which connection is which. (“idrive wireless connection” “internet connection”)
−
 
  
  
 
'''Set Network Order''' – Ensure that the Internet network and not the Idrive network is accessed for the internet. Start&gt;Network, select Network and Sharing Center, select Change Adaptor Settings, press ALT to make the advanced tab at the top appear, select advanced settings, in the connections window ensure that the internet connection is on top and the idrive wireless connection is second, click OK
 
'''Set Network Order''' – Ensure that the Internet network and not the Idrive network is accessed for the internet. Start&gt;Network, select Network and Sharing Center, select Change Adaptor Settings, press ALT to make the advanced tab at the top appear, select advanced settings, in the connections window ensure that the internet connection is on top and the idrive wireless connection is second, click OK
−
 
−
 
−
 
  
  
 
'''Disk Partitions/ Raid configuration''' – Check to make sure the RAID 1 set is working. Intel raid manager icon in lower right corner
 
'''Disk Partitions/ Raid configuration''' – Check to make sure the RAID 1 set is working. Intel raid manager icon in lower right corner
−
 
  
  
Line 129: Line 109:
  
 
Start&gt;All Programs&gt;Windows Update, Accept the agreement, check the boxes for:  Recommended updates, Who can install updates, Microsoft updates. When finished restart system  
 
Start&gt;All Programs&gt;Windows Update, Accept the agreement, check the boxes for:  Recommended updates, Who can install updates, Microsoft updates. When finished restart system  
−
 
  
  
Line 136: Line 115:
  
  
−
'''Show hidden icons in the Taskbar '''
+
'''Show hidden icons in the Taskbar ''' Click on the arrow, select customize, Click show all icons checkbox.
−
 
 
−
Click on the arrow, select customize, Click show all icons checkbox.
 
  
  
Line 159: Line 136:
  
 
'''Change account user picture to Idrive logo''' - Start&gt;Control Panel&gt;User Accounts&gt;User Accounts&gt;Change Account picture and browse to where you placed the Logo
 
'''Change account user picture to Idrive logo''' - Start&gt;Control Panel&gt;User Accounts&gt;User Accounts&gt;Change Account picture and browse to where you placed the Logo
−
 
−
 
−
 
−
 
−
 
  
  
 
(From Here down it is customer specific)
 
(From Here down it is customer specific)
−
 
−
 
−
 
−
 
−
 
  
  
Line 177: Line 144:
  
 
Start&gt;Programs&gt;idrive&gt;uninstall and click finish to safely remove software. Then go to control panel&gt;hard drive&gt;program files(86x)&gt;idrive folder and delete the entire folder. Any setup or informational data in this file will be reloaded onto computer when control center is re-installed
 
Start&gt;Programs&gt;idrive&gt;uninstall and click finish to safely remove software. Then go to control panel&gt;hard drive&gt;program files(86x)&gt;idrive folder and delete the entire folder. Any setup or informational data in this file will be reloaded onto computer when control center is re-installed
−
 
  
  
 
'''Uninstall Microsoft SQL Server 2005 – '''Control panel&gt; Programs&gt; uninstall  
 
'''Uninstall Microsoft SQL Server 2005 – '''Control panel&gt; Programs&gt; uninstall  
−
 
  
  
Line 189: Line 154:
  
 
Defaults for all questions EXCEPT for “Database Engine Configuration”. Set it to “Mixed Mode” and the password to idrive2# .
 
Defaults for all questions EXCEPT for “Database Engine Configuration”. Set it to “Mixed Mode” and the password to idrive2# .
−
 
  
  
Line 218: Line 182:
  
 
'''Remove previous shipping labels from the Boxes.'''
 
'''Remove previous shipping labels from the Boxes.'''
−
 
−
 
−
 
−
 
−
 
−
 
−
 
−
 
−
 
−
 
−
 
−
 
−
 
−
 
−
 
−
 
−
 
−
 
−
 
−
 
−
 
−
 
−
 
−
 
−
 
−
 
−
 
−
 
−
 
  
  
 
==='''BulletHP2 Setup'''===
 
==='''BulletHP2 Setup'''===
  
−
 
+
====connections====
−
 
 
−
connections
 
−
 
 
  
  
 
Attach the Antenna to the Bullet prior to powering on the unit!
 
Attach the Antenna to the Bullet prior to powering on the unit!
−
 
  
  
 
The Ubiquity BulletHP2 is receives its power over the shielded ethernet cable (POE).
 
The Ubiquity BulletHP2 is receives its power over the shielded ethernet cable (POE).
−
 
  
  
 
Plug a regular cat5 cable from the ”Idrive Wireless Connection” network port of the computer into the Lan port of the POE injector.
 
Plug a regular cat5 cable from the ”Idrive Wireless Connection” network port of the computer into the Lan port of the POE injector.
−
 
  
  
 
Plug the “FTP”  (Foil Wrapped Twisted Pair) cable from the POE port of the Power injector to the NanoStation.
 
Plug the “FTP”  (Foil Wrapped Twisted Pair) cable from the POE port of the Power injector to the NanoStation.
−
 
  
  
 
Plug in the POE adaptor into a wall outlet.
 
Plug in the POE adaptor into a wall outlet.
−
 
  
  
Line 280: Line 207:
  
  
−
 
+
====Network connectivity====
−
connectivity
 
−
 
 
−
 
 
  
 
The factory default IP address for the Bullet is 192.168.1.20 . The idrive wireless connection interface subnet must be changed to for the initial configuration of the NanoStation
 
The factory default IP address for the Bullet is 192.168.1.20 . The idrive wireless connection interface subnet must be changed to for the initial configuration of the NanoStation
−
 
−
 
  
 
Start&gt;Control Panel&gt;Network and Internet&gt;Network and Sharing Center&gt;Change adaptor settings, Right Click on the Idrive Wireless Connection and select properties, select “Internet Protocol Version 4(TCP/IPv4)” ,select properties
 
Start&gt;Control Panel&gt;Network and Internet&gt;Network and Sharing Center&gt;Change adaptor settings, Right Click on the Idrive Wireless Connection and select properties, select “Internet Protocol Version 4(TCP/IPv4)” ,select properties
  
 
Set up the IP address to 192.168.'''1'''.10
 
Set up the IP address to 192.168.'''1'''.10
−
 
  
  
 
When Windows 7 detects the new network (wireless router) it will ask for the network type. Chose “Public”
 
When Windows 7 detects the new network (wireless router) it will ask for the network type. Chose “Public”
−
 
  
  
 
configuration
 
configuration
−
 
−
 
  
 
Launch internet explorer and enter the address http://192.168.1.20
 
Launch internet explorer and enter the address http://192.168.1.20
  
 
Login as ubnt with a password of ubnt
 
Login as ubnt with a password of ubnt
−
 
−
 
−
 
  
  
 
Network Tab
 
Network Tab
−
 
  
  
Line 338: Line 252:
  
 
Change Idrive Wireless Connection settings back:
 
Change Idrive Wireless Connection settings back:
−
 
  
  
Line 344: Line 257:
  
 
Set up the IP address to 192.168.'''0'''.10
 
Set up the IP address to 192.168.'''0'''.10
−
 
  
  
Line 350: Line 262:
  
 
Login as ubnt with a password of ubnt
 
Login as ubnt with a password of ubnt
−
 
  
  
Line 374: Line 285:
  
 
Click Apply Changes
 
Click Apply Changes
−
 
−
 
  
  
Line 388: Line 297:
  
 
Click Apply Changes
 
Click Apply Changes
−
 
  
  
 
Log back into the Ubiquity Bullet with the new password
 
Log back into the Ubiquity Bullet with the new password
−
 
  
  

Revision as of 21:48, 25 April 2013

General Guideline for Basic Base Station configuration with either NanoStation2 or Ubiquity Bullet (4/25/13)

<br\><br\>

Basic Computer Documentation

Unpack computer and document the following information so it can be tracked in the future. An example Dell system is shown and this information is available from the labels on the computer case.

  • Model Number: Dell Optiplex
  • SVCTAG: F8S2KL1
  • Express service code: 33182613685
  • Operating System: Windows 7 Professional
  • Windows code: CTRB2-38DT4-QGJCK-DHHPH-FHH3G

<br\><br\>


Basic Computer setup

(Local person Required)


Set up and turn on the system.


Basic initial system identification

The particular order and questions will vary depending on the system.

  • Computer Name: Idrive_base
  • User Name: Idriveadm
  • Password: 111111

(password hint: six 1’s)

  • Set windows to install updates automatically
The computer should eventually come to a point where you can log in as Idriveadm
Log on and verify internet connectivity


Idrive Base Station Setup

Install The Dell updates (you will be prompted for this the first time the system comes up).


Set Power settings so the computer will not shutdown on its own:

Start>Control Panel>System and Security>Power Options , For the “Dell Plan” select change plan setting and under “Plugged In” set the “Put the computer to sleep” option to never. Select save changes


Set User Account Control (UAC) – Control Panel> System and Security>Action Center>Change User Account Control , Set track to “Never Notify” ( This is so the Idrive Transfer Tool will automatically start)


Set the Workgroup to IDRIVE Control panel> System >change settings


Reboot system ( after Dell updates complete)


Install Teamviewer Go to Teamviewer website http://www.teamviewer.com/en/download/dyngate.aspx#version5 download teamviewer version 5.1.13999(multilanguage). Select Run, once downloaded select Install (Default) and click Next, Select personal /non-commercial use and click Next, accept license agreement and click Next, select Start Automatically with Windows, create a strong password and confirm it (#Idrv79p for example and keep it because it must be entered in the Idrive Admin Center) then click Next, select Full access and click Next, The program installs and click on Finish. The program will launch. In the window that comes up there is an ID number under “Wait for Session” (example 123 456 789). Enter the ID and Password into the AdminCenter as well as the idrive support Teamviewer account.


Activate Teamviewer License- At the top of teamviewer select Extras>Activate License. The license number is 09-31004-216139-269687


Set windows logon Allowed for administrators – Extras> Options> Security


Set Customer’s Time zone -

Start>Control Panel> Clock, Language, Region>Date and Time>Change Time zone


Networks - One of the network connections will be for the Internet and the other for the idrive Wireless Connection. The Silver port should be used for internet, the black for wireless network.A label should be applied to the back of the system to identify each network connection


Internet connection should be set to automatically get its network addresses (DHCP). This should be good by default. Rename the connection “Internet Connection” Start>Control Panel>Network and Internet>Network and Sharing Center>Change adaptor settings, Right Click on the connection and select rename


Idrive Wireless Connection Start>Control Panel>Network and Internet>Network and Sharing Center>Change adaptor settings , Right Click on the connection and select rename. The Wifi router connection should be renamed to “Idrive Wireless Connection” . Done

Start>Control Panel>Network and Internet>Network and Sharing Center>Change adaptor settings, Right Click on the Idrive Connection and select properties, select “Internet Protocol Version 4(TCP/IPv4)”, select properties

Set up the IP address to 192.168.0.10, Network mask 255.255.0.0 , default gateway Blank and DNS servers to NOT automatic and blank settings.


Label each network adaptor on the back of the machine so the customer will know which connection is which. (“idrive wireless connection” “internet connection”)


Set Network Order – Ensure that the Internet network and not the Idrive network is accessed for the internet. Start>Network, select Network and Sharing Center, select Change Adaptor Settings, press ALT to make the advanced tab at the top appear, select advanced settings, in the connections window ensure that the internet connection is on top and the idrive wireless connection is second, click OK


Disk Partitions/ Raid configuration – Check to make sure the RAID 1 set is working. Intel raid manager icon in lower right corner


run Windows Update:

Start>All Programs>Windows Update, Accept the agreement, check the boxes for: Recommended updates, Who can install updates, Microsoft updates. When finished restart system


Install Microsoft Security Essentials http://www.microsoft.com/Security_Essentials , select download, select run, select finish and an update will download and the system will be scanned. Set to full scan, Saturday


Show hidden icons in the Taskbar Click on the arrow, select customize, Click show all icons checkbox.


Install Acrobat Reader - http://get.adobe.com/reader uncheck install google toolbar/chrome etc, select download at the bottom, Close download manager when done.


Set default web page to Idrive.pro – Launch Internet Explorer, depress the alt key to display tools, from tools select Internet Options, Set Home page to http://www.idrive.pro


Install VLC Media Player - http://www.videolan.org/vlc/index.html


Install the Idrive desktop logo. Logo 1.png – this is for the background for the desktop of the base stations. Copy it to a known location on the system. Right click on the desktop and pick Personalize, select Desktop background and browse to where you placed the Logo


Change account user picture to Idrive logo - Start>Control Panel>User Accounts>User Accounts>Change Account picture and browse to where you placed the Logo


(From Here down it is customer specific)


*For Demo Unit, Uninstall Any Pre-existing Idrive Software – for a returned demo unit, the software must be removed and re-installed to ensure the latest versions/updates.

Start>Programs>idrive>uninstall and click finish to safely remove software. Then go to control panel>hard drive>program files(86x)>idrive folder and delete the entire folder. Any setup or informational data in this file will be reloaded onto computer when control center is re-installed


Uninstall Microsoft SQL Server 2005 – Control panel> Programs> uninstall


Install Microsoft SQL server 2008R2 –

Click on “New Installation”

Defaults for all questions EXCEPT for “Database Engine Configuration”. Set it to “Mixed Mode” and the password to idrive2# .


Install Idrive 2.0 Control Center - Before this can be run to conclusion you will require a Validation Serial Number (License). This is generated in the Idrive Admin Center. To install the Control Center double click download-file-idrive.zip\idrive\setup.exe click next, enter Validation Serial Number click Done.


Create Shortcuts to the 3 Idrive manuals on the desktop –

Base Station installation Guide http://wiki.idrive.pro/index.php?title=Idrive_Base_Station_Installation_Guide

Idrive Control Center 2.0 User’s Guide http://wiki.idrive.pro/index.php?title=Idrive_Control_Center_2.0_User%E2%80%99s_Guide

Idrive X1 Installation and Operation Guide http://wiki.idrive.pro/index.php?title=Idrive_X1_Installation_and_Operation_Guide

Organize Icons from left to right near bottom of desktop screen.


Copy The Idrive idrive.cert file to The desktop – Place it next to the manual shortcuts on the Desktop


Transfer ownership of the system to the customer –

http://support.dell.com/support/topics/global.aspx/support/change_order/exception_tag_transfer?&~ck=anavml


Remove previous shipping labels from the Boxes.


BulletHP2 Setup

connections

Attach the Antenna to the Bullet prior to powering on the unit!


The Ubiquity BulletHP2 is receives its power over the shielded ethernet cable (POE).


Plug a regular cat5 cable from the ”Idrive Wireless Connection” network port of the computer into the Lan port of the POE injector.


Plug the “FTP” (Foil Wrapped Twisted Pair) cable from the POE port of the Power injector to the NanoStation.


Plug in the POE adaptor into a wall outlet.


Verify there are lights on the unit.


Network connectivity

The factory default IP address for the Bullet is 192.168.1.20 . The idrive wireless connection interface subnet must be changed to for the initial configuration of the NanoStation

Start>Control Panel>Network and Internet>Network and Sharing Center>Change adaptor settings, Right Click on the Idrive Wireless Connection and select properties, select “Internet Protocol Version 4(TCP/IPv4)” ,select properties

Set up the IP address to 192.168.1.10


When Windows 7 detects the new network (wireless router) it will ask for the network type. Chose “Public”


configuration

Launch internet explorer and enter the address http://192.168.1.20

Login as ubnt with a password of ubnt


Network Tab


Network> Network Mode: Bridge

Network> Bridge IP Address: Static

Network>Set the IP address to 192.168.0.1

Network>Set the network Mask to 255.255.0.0

Network>Set the Default Gateway to 192.168.0.1

Network>Set The Primary DNS Server to 192.168.0.1

Network> Auto IP Aliasing unchecked


Click Change

Click Apply Changes


Change Idrive Wireless Connection settings back:


Start>Control Panel>Network and Internet>Network and Sharing Center>Change adaptor settings, Right Click on the Idrive Connection and select properties, select “Internet Protocol Version 4(TCP/IPv4)” ,select properties

Set up the IP address to 192.168.0.10


Launch internet explorer and enter the address http://192.168.0.1

Login as ubnt with a password of ubnt


Wireless> Wireless Mode: Access Point

Wireless> SSID: bwifi (these are case sensitive)

Wireless> check Hide SSID

Wireless> Country Code: (Default is USA)

Wireless >IEEE 802.11 Mode: G mode Only

Wireless> Channel Width: 20Mhz

Wireless> Channel Shifting: Disabled

Wireless> Output Power: 20DBM


Click Change

Click Apply Changes


System> Administrator Username: admin

System Password : idrive#


Click Change

Click Apply Changes


Log back into the Ubiquity Bullet with the new password


Test download from a unit.







NanoStation 2 Setup

http://www.ubnt.com/wiki/AirOS-Quick_Setup_Guide


connections


The NanoStation is receives its power over the shielded ethernet cable (POE).


Plug a regular cat5 cable from the ”Idrive Wireless Connection” network port of the computer into the Lan port of the POE injector.


Plug the “FTP” (Foil Wrapped Twisted Pair) cable from the POE port of the Power injector to the NanoStation.


Plug in the POE adaptor into a wall outlet.


connectivity


The factory default IP address for the NanoStation2 is 192.168.1.20 . The idrive wireless connection interface settings must be changed to for the initial configuration of the NanoStation


Start>Control Panel>Network and Internet>Network and Sharing Center>Change adaptor settings, Right Click on the Idrive Connection and select properties, select “Internet Protocol Version 4(TCP/IPv4)” ,select properties

Set up the IP address to 192.168.1.10


When Windows 7 detects the new network (wireless router) it will ask for the network type. Chose “Public”


*If configuring a Nanostation2 that has been returned in a demo kit, reset the device by holding down the reset button for ~10 seconds, before adjusting Idrive connection properties*


configuration


Launch internet explorer and enter the address http://192.168.1.20

Login as ubnt with a password of ubnt


Network Tab


Network> Network Mode: Bridge

Network> Bridge IP Address: Static

Network>Set the IP address to 192.168.0.1

Network>Set the network Mask to 255.255.0.0

Network>Set the Default Gateway to 192.168.0.1

Network>Set The Primary DNS Server to 192.168.0.1


Click Change

Click Apply Changes



Change Idrive Wireless Connection settings back:


Start>Control Panel>Network and Internet>Network and Sharing Center>Change adaptor settings, Right Click on the Idrive Connection and select properties, select “Internet Protocol Version 4(TCP/IPv4)” ,select properties

Set up the IP address to 192.168.0.10


Launch internet explorer and enter the address http://192.168.0.1

Login as ubnt with a password of ubnt


Link Setup> Wireless Mode: Access Point

Link Setup> ESSID: bwifi (these are case sensitive)

Link Setup> Country Code: (Default is USA)

Link Setup >IEEE 802.11 Mode: G only

Link Setup> Output Power: 26DBM, check “Obey Regulatory Power”

20Mhz width

No Channel Switching


Click Change

Click Apply Changes



System> Administrator Username: admin

Current password: ubnt

System Password : idrive#

Confirm password


Log back into the router with the new password


Test download from a unit.

Retrieved from "https://admincenter.idriveglobal.com/wiki/index.php?title=Base_Station_Configuration_Guide&oldid=1926"