Manufacturing:Idrive X2 Production Process
The production process for the Idrive X2 cameras has been created with purpose in mind of tracking all work in progress as well as finished goods. This information is sent over the internet to the Idrive AdminCenter website where it is logged and configuration information is obtained for each device. As much of the testing as possible has been automated however certain steps will require human intervention. Wherever possible a bar code reader is used to reduce input errors.
To facilitate this tracking each X2 Main board MUST HAVE a unique serial number assigned to it. Idrive produces the range of serial numbers for each build and allocates them to the assembly vendor when a purchase order is issued. Each serial number must remain unique and track through the production process all the way to a finished camera (which will inherit this serial number) or to scrap of the PCB assembly due to defect. A serial number should NEVER be reused.
Table of Contents (Links to individual Documents)
[| Idrive_X2_Production_Process_Flow]
[| X2 Main PCB Board Assembly]
[| X2 Main Board Initial Programming and Test]
[| X2_Top_Level_Camera_Assembly]
[| X2_Secondary_Configuration/Testing]
[| X2_Final_Assembly/Packaging]
[| X2_Shipping/Order_Fulfillment]
[| X2_MicroSD_Card_Programming]