D8 repair and reprocessing

D8 Repair

Verify the reported issue.

Check for physical damage to the connectors or case

Motherboard Replacement

Open the DVR case

• Remove the SSD Sled

• Remove the two top screws on the front of the D8

• Remove the 4 screws on the back panel

• Slide the top cover back and slowly lift up

• Disconnect the 3 cables to the Mother Board

• Lift off the Top cover and set aside

Remove Back Panel

• Disconnect the cables from the Mother Board, GPS and Cellular Modules

D8 Reprocessing

Configure for customer