Stonkam D8 End User Guide

From Idrive
Revision as of 16:43, 28 July 2017 by Mark (talk | contribs) (Created page with "==Idrive D8 End User Guide== ===Front Panel LEDs=== PWR: Power indicator. It always lights up when the DVR is powered on. RUN: Working status indicator. It will flash slowl...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Idrive D8 End User Guide

Front Panel LEDs

PWR: Power indicator. It always lights up when the DVR is powered on.

RUN: Working status indicator. It will flash slowly when DVR is running.

ALM: Alarm indicator. It keeps on with the record when there is Alarm-in, G-force activation or motion detection or speed or panic button event alarm.

GPS: GPS indicator. It lights up when GPS is running.

CAM: Camera indicator. It keeps on when camera is working and off when not working.

SD: SD card indicator. It blinks when recording, and keeps on when no recording, and is off when SD card in abnormal status.

SSD: SSD/HDD indicator. It blinks when recording, and keeps on when no recording, and is off when SSD/HDD in abnormal status.

CELL: Cellular indicator. It always lights up when uploading data and off when no cellular module or cellular module in abnormal status.

WIFI: WIFI indicator. It always lights up when uploading data and off when no cellular module or WIFI module in abnormal status.

Retrieved from "https://admincenter.idriveglobal.com/wiki/index.php?title=Stonkam_D8_End_User_Guide&oldid=7428"