Video Splitter Assembly

Process steps for Assembling an idrive 4 channel video splitter (Mount 4 PCBs, Affix Input Faceplate, Affix Output Faceplate, Secure 4 Nuts on Input side, Secure 8 nuts on output side)

Step 1: Mount the 4 PCB Boards

• Slide Each PCB board sequentially in the 4 slots, making sure all boards have the same orientation as in the image below

Note: Use the idrive logo on the case as a reference point when determining correct orientation

Step 2: Affix the Input Face-plate

• Place the Input face-plate flush with the input plugs and use four of the provided screws to secure it to the case

Note: The input side of the PCB has only 1 plug as well as four small led indicator lights

Step 3: Affix the Output Face-Plate

• Place the Output face-plate flush with the output plugs and use four of the provided screws to secure it to the case

Note: The output side of the PCB has 2 plugs

Secure 4 Input Nuts

• Fasten the 4 input nuts tightly to the case as in the image below

Secure 8 Output Nuts

• Fasten the 8 output nuts tightly to the case as in the image below