Filesystem

How to build a X2 filesystem.

1. Use Boundary base filesystem "ltib4-no-x-20130618" as starting point.

2. Prepare an ext4 SD card having "ltib" label.

3. Changes that have to be applied to the base filesystem in order to be able to run X2 application:

kernel + modules 
run ist.sh under kernel distribution which will copy all needed files to /media/ltib

/etc/fstab - 128MB RAM disk and SD card auto mount 
Edit /etc/fstab and add the following lines: 
  tmpfs /mnt/ramdisk tmpfs defaults,noatime,nosuid,nodev,noexec,mode=1777,size=128M 0 0
  /dev/mmcblk1p1  /mnt/sdcard    auto    defaults     0     0

X2 application
/root/
 + x2idr.fw,
 + adresa.cfg,
 + ip.cfg,
 + mac.cfg,
 + size.cfg,
 + run.sh, 
 + stream.sh,
 + modules.sh,
 + make_board_links.sh;
/root/lib/ 
 + libavccodec.so.56.0.101,
 + libavformat.so.56.3.100,
 + libavutil.so.54.7.100,
 + libswresample.so.1.1.100,
 + libswscale.so.3.0.100;
/root/modules/ 
 + event.ko,
 + rt5572sta.ko;
/etc/rc.d/
 + rc.conf < config_services += "idrive", HOSTNAME="Idrive", IPADDR0="10.3.0.254";
 + init.d/idrive 
 

/etc/Wireless/RT2870STA/
 + RT2870STA.dat;
 + RT2870STACard.dat;

USB stick update application
/root/
 + update,
 + update_stick_log.txt;
/etc/udev/rules.d/01-usb-stick.rules;
/lib/udev 
 + update.sh
 + reboot.sh
 + update

wpa supplicant - WIFI
/root/
 + wpa_supplicant,
 + wpa_passphrase;

pppd - 3G module
/etc/ppp/*
/usr/sbin/
 + pppd
 + chat
 + ln -s /etc/ppp/resolv.conf /etc/resolv.conf

4. Copy the files structure to the SD Card.