Temporary editing wiki space

This is a sandbox area to create customer wiki updates before they go live on the customer wiki site

work on the section here and then clip it into the live documents when new version is released and the document is complete - Mark

VPN Client scratch space initial steps then elaborate

Connect

Run Winbox.exe, select router from list and click connect

Configure interfaces

Select "Interfaces" from the left menu and enable both "wlan1" and "ppp-out1".

3G stuff N/A for main wiki

Connect your 3G USB dongle and restart router.

Return on "Interface List" and double-click "ppp-out1" and make sure that "usb1" option is selected. If the "Port" drop-down list is empty then your 3G dongle is not supported.

Our 3G USB worked by default without any other configuration. Click on "Advanced Mode" if your SIM does require mobile carrier configuration.

Configure on board Wifi

Return on "Interface List" double-click "wlan1", select "Wireless" tab and complete the fields as in picture.

Configure Internet Bridge

Select "Bridge" from the left menu and add new bridge.

Configure Port Bridge 1

From the same window select "Ports" tab and add the following interfaces as in picture.

IP Address

Select IP->Address List from the left menu and add a new address.

Configure Internal Bridge

Return to "Bridge" and add a new bridge.

Make sure the "ARP" is disabled and enter the MAC Address: 00:00:5E:80:01:01 then select "STP" tab and check "Protocol Mode: rstp".

Configure Port Bridge 2

Select "Ports" tab from "Bridge" interface and add "ether1" and "wlan1" to "bridge_tunnel".

PPP 3G only?

Select "PPP" from the left menu then go to "Profiles" tab and add new profile.

Complete the fields then select "Protocols" tab and check "yes" under "Use Encryption".

SSTP over internet connection?

[|"Secure Socket Tunneling Protocol"]

Return to "Interface List" and add new "SSTP Client".

Dial out - 3G Wireded or both?

In the "Dial Out" fill "Connect To:" with the VPN Server public IP, set port to 1723, enter the user name and password that you have created on VPN Server.

Uncheck "pap" and "chap" boxes from "Allow".

If the VPN Server is configured the status will appear as connected. If the VPN Server is not configured then check Configure VPN Server.