X1 V7 Series Device Manufacturing and Programming Admin Documentation

From Idrive
Revision as of 18:51, 27 June 2013 by Mark (talk | contribs)
Jump to navigation Jump to search

Factory - New Devices - Manual

password protected. the password is: idrive2man (no # like in the others passwords)

<br\><br\>

RMA

password protected. the password is: idrive2#rma

<br\><br\>


Idrive Development Mode

password protected. the password is: idrive2#dev

<br\><br\>

In Settings->Config and Install

3 options are visible only if you use the Idrive Development Mode

1. Device IP (for non-standard camera IP address)

2. Subnet Mask (for non-standard netmask)

3. Server IP (for non-standard base station IP address))

<br\><br\>

In Settings->Events Test

3 options are visible only if you use the Idrive Development Mode

1. Validate the number of shock events (enabled by default)

2. Validate GPS connection in events (enabled by default)

3. Delete Events folder when form is closed (disabled by default)

<br\><br\>

In Settings->Factory IDs

1.) Factory ID (Manufacturing location)

2.) Station ID (Computer used for programming)

3.) Programmer ID (Programmer board in use)

<br\><br\>

In Settings->Admin Center

1.) MySql host

2.) MySql port (3306)

3.) MySql user (root)

4.) MySql password

5.) MySql database

<br\><br\>


Putty commands modes

View boot messages from idrive DUT

download putty.exe : http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html


-Close factory tool software if it's open

-Connect the USB cable to Programmer ,when you connect the USB cable to PC a USB Serial Port (COM x) will appear in Device Manager -> Ports(COM&LPT)

-Double click on putty.exe and change com number to match the Device Manager one.


Speed needs to be 115200 , open connection.

Put the programmer in manual mode:

-Turn Off all switches including main power (SW1)

-Turn On this switches : Idrive_on_off(SW8),Door(SW3),Test(SW5) leave the other switches off

-Turn On main power switch(SW1)

-Turn Off Door and Test switches

-Turn On Ignition

Now Idrive boot messages can be seen in Putty.

Manual Commands to V7 Programmer

With no idrive device attached you can test commands to the programmer

type in the putty window one of the following commands and enter(you will not see in putty window what you are typing ):

idrive_on

ignition_on

door_on

test_on

alarm_on

panic_on

this commands are case sensitive!

the programmer will confirm command with a beep ,in putty window you should see a confirmation message (ex. idrive_on_done ) and the corresponding LED should be on.

For the off commands use _off instead of _on (ex. idrive_off).


<br\><br\>

Retrieved from "https://admincenter.idriveglobal.com/wiki/index.php?title=X1_V7_Series_Device_Manufacturing_and_Programming_Admin_Documentation&oldid=2333"