AI Pro 7 - Camera Assembly

Pro 7 RMA breakdown

1. Remove the 4 screws from backing of the Pro 7

2. Disconnect connection between speaker, cellular, and GPS. (Replace parts if damaged or inop)

3. To remove the GPS puck, remove screw holding down the puck to the Motherboard.

4. Slide the GPS Puck slowly in the opposite direction of its connection point.

5. Remove display unit by gently pulling it from its connection point on the motherboard. It should slide off with ease.

6. To remove the lens, just gently lift and it will disconnect from the motherboard. (GPS Puck and display mod. Should be removed first before lens replacement).

7. To replace the SIM, just look behind the GPS Puck.