AI RMA Documentation:AI AI Factory Tool Configuration

From Idrive
Revision as of 15:57, 4 June 2020 by Mark (talk | contribs) (Created page with "==AI File Recovery with Android Studio== You will need a switch box to be able to power on the AI and Ignition switches, a micro USB3 cable and a Wi-Fi. You will not need a p...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

AI File Recovery with Android Studio

You will need a switch box to be able to power on the AI and Ignition switches, a micro USB3 cable and a Wi-Fi. You will not need a programmer. Also a TORX Driver to open the case if needed.

Download Tools

https://admincenter.idriveglobal.com/wiki/?title=Idrive_Downloads

Idrive Manufacturing - Factory Tool 3.7.2

AI Firmware – ASOP 5.0 – Factory Tool (this is the android OS for the camera)

AI Firmware – Firmware 40.1 Build 65 (Latest Idrive firmware)

Install Tools

Factory Tool

Remove any old Factory Tool and install the new versio

ASOP 5.0 & Firmware instructions from Radu:

Once the Factory Tool is installed, you have to go in c:\Program Files (x86)\idrive\FactoryTool2.0\Factory\FactoryToolsAI folder.


1. Aosp folder is the place where FT is looking for installing the Aosp (Android Operating System) on camera. By default this folder is empty and you have to populate it with the files from the aosp archive.

  • Every time when a new AOSP is released, the files from Aosp folder should be replaced with the new files.

2. Firmware folder is auto-populated by the Factory Tool installer and should have the following structure:

- firmware.apk represents the current firmware version (40.1.65)

- updater.apk is a background application taking care about firmware and aosp upgrades / firmware crashes / background staffs. The current version is 1.0

- idrive_root is the place where we keep different files (neural networks, settings, etc)

- firmware.apk should be replaced every time when a new stable firmware is released. For example, if you have a new update.apk file, you can rename this file and copy it over firmware.apk. You have also to copy the same file over idrive_root/recovery.apk file

- The same mechanism should be used if we will upgrade updater.apk. That apk should also be copied over idrive_root/recovery_updater_app.apk.

- Any file from idrive_root folder is replaceable. In the future we can add / remove / replace any file from idrive_root

3. Tools folder should be leaved as it is 🙂

The Factory Tool is documented, but I don't have the documentation now 🙂 (Alexandra will send you all documents tomorrow morning) However the process is very similar with X2. There are AI settings in Idrive Development->Settings->Config and Install (see below)

(DO NOT CHANGE the "sleep seconds" fields for AI devices only).

Retrieved from "https://admincenter.idriveglobal.com/wiki/index.php?title=AI_RMA_Documentation:AI_AI_Factory_Tool_Configuration&oldid=11313"