Driver ID Specs

Introduction

Driver ID component is a Idrive X1P accessory that provides driver identification based on iButton key and a one wire protocol reader.

Overall Description

Driver ID component will contain the following:

* iButton key(http://www.maximintegrated.com/products/ibutton/ibuttons/)

* Idrive designed one wire protocol key reader using an Atmel xxx micro-controller.
  * Idrive designed PCB   
  * Idrive designed micro-controller software.

System Features

Send a driver identification code to FW via RS232(mini HDMI Port) that will be logged and attached to events header. Use notification audio signal if the identification needs to be done. Use notification audio signal if the serial connection between reader and Idrive X1P was lost.

Hardware Requirements

• RS232 connection using Idrive X1P external connector - mini HDMI;
• 5V power connection using Idrive X1P external connector - mini HDMI;