USB Config Files

USB Configuration Files

ASCII files that can be used to change the X2 configuration using a USB Stick.

To have the camera read the USB stick the idrive.cert must be present

adresa.cfg - Sets Base Station Address

192.168.0.10 is default

ip.cfg - Sets IP Address & Netmask of the camera

192.168.0.11 - 192.168.254.254 Standard IP Address Range

255.255.0.0 Standard Network Mask

Note: If the device is run through factory tool the setting will reset to what is set in AC

limit.cfg

Not sure

mac.cfg - changes the MAC Address for the Wifi

00127B4B5F4E

port.cfg - Sets the Port for transfers

9090

reg1.cfg

Not Sure

router.cfg - Sets SSID for Wifi connection (X1 Only)

bwifi is the default

Note: For X2 see wifi-settings.cfg

shock.cfg - Setting of G-force in old X1

1. //eveniment pe acceleratie
2. WriteRegistru(CTRL_REG1,0x87);

0x20 0x85 0x00

1. WriteRegistru(CTRL_REG2,0x88);

0x21 0x08 0x00

1. WriteRegistru(CTRL_REG3,0x22);

0x22 0x22 0x00

1. WriteRegistru(FF_WU_THS_L, 0x99);

0x34 0x99 0x00

1. WriteRegistru(FF_WU_THS_H, 0x29);

0x35 0x29 0x00

1. WriteRegistru(FF_WU_DURATION, 0x00);

0x36 0x00 0x00

1. ReadRegistru(HP_FILTER_RESET); //dummy read

0x23 0x00 0x01

1. WriteRegistru(FF_WU_CFG, 0x4A);

0x30 0x62 0x00

1. ReadRegistru(FF_WU_ACK);

0x32 0x00 0x01