D8 repair and reprocessing

From Idrive
Revision as of 17:52, 16 January 2019 by Mark (talk | contribs) (→‎D8 Repair)
Jump to navigation Jump to search

D8 Repair

Verify the reported issue.

Check for physical damage to the connectors or case


Motherboard Replacement

Open the DVR case

  • Remove the SSD Sled
  • Remove the two top screws on the front of the D8
  • Remove the 4 screws on the back panel
  • Slide the top cover back and slowly lift up
  • Disconnect the 3 cables to the Mother Board
  • Lift off the Top cover and set aside


Remove Back Panel

  • Disconnect the cables from the Mother Board, GPS and Cellular Modules


Move GPS, SIM and Cellular Module to replacement board

GPS Module

Remove the two screws securing the module.

Apply Blue Locktite to the mounting studs on the new board

Screw the two screws in attaching the module (do not over torque)

D8 Reprocessing

Configure for customer


Retrieved from "https://admincenter.idriveglobal.com/wiki/index.php?title=D8_repair_and_reprocessing&oldid=9710"