Wireless Bridge Documentation
Revision as of 21:20, 17 September 2015 by Mark (talk | contribs) (→Ubiquity Nanostation M5 Configuration)
Idrive Wireless Bridge Documentation
<br\><br\>
Description
For access to locations where cable cannot be run.
<br\><br\>
Equipment Required
2 Ubiquity Nano Station M5s (5.8GHz model)
<br\><br\>
Ubiquity Nanostation M5 Configuration
Plug in the M5 and contact it at 192.168.1.20 (switch your PC NIC so it can communicate)
Log into the M5 using your web browser User: ubnt Password: ubnt
Accept the agreement
Network Tab
Network Mode : Bridge
Disable Network: None
Configuration Mode: Simple
IP Address: 192.168.0.x Set the other end to 192.168.0.x+1
Network Mask : 255.255.0.0
Gateway : 192.168.0.x (this device or partner?)
Click Change and then apply.
Set the PC NIC back to 192.168.0.10