Difference between revisions of "USB Config Files"
Jump to navigation
Jump to search
(Created page with "==USB Configuration Files== ASCII files that can be used to change the X2 configuration using a USB Stick. To have the camera read the USB stick the idrive.cert must be pres...") |
|||
| Line 19: | Line 19: | ||
255.255.0.0 Standard Network Mask | 255.255.0.0 Standard Network Mask | ||
| − | '''Note:''' If the device is run through factory tool the setting will | + | '''Note:''' If the device is run through factory tool the setting will reset to what is set in AC |
| + | |||
| + | <br> | ||
| + | |||
| + | ==limit.cfg== | ||
| + | |||
| + | Not sure | ||
| + | |||
| + | <br> | ||
| + | |||
| + | ==mac.cfg - changes the MAC Address for the Wifi== | ||
| + | |||
| + | 00127B4B5F4E | ||
| + | |||
| + | <br> | ||
| + | |||
| + | ==port.cfg - Sets the Port for transfers== | ||
| + | |||
| + | 9090 | ||
| + | |||
| + | <br> | ||
| + | |||
| + | ==reg1.cfg== | ||
| + | |||
| + | Not Sure | ||
| + | |||
| + | <br> | ||
| + | |||
| + | ==router.cfg - Sets SSID for Wifi connection (X1 Only) | ||
| + | |||
| + | For X2 see wifi-settings.cfg | ||
<br> | <br> | ||
Revision as of 23:25, 15 February 2019
USB Configuration Files
ASCII files that can be used to change the X2 configuration using a USB Stick.
To have the camera read the USB stick the idrive.cert must be present
adresa.cfg - Sets Base Station Address
192.168.0.10 is default
ip.cfg - Sets IP Address & Netmask of the camera
192.168.0.11 - 192.168.254.254 Standard IP Address Range
255.255.0.0 Standard Network Mask
Note: If the device is run through factory tool the setting will reset to what is set in AC
limit.cfg
Not sure
mac.cfg - changes the MAC Address for the Wifi
00127B4B5F4E
port.cfg - Sets the Port for transfers
9090
reg1.cfg
Not Sure
==router.cfg - Sets SSID for Wifi connection (X1 Only)
For X2 see wifi-settings.cfg