Difference between revisions of "D8 repair and reprocessing"
Jump to navigation
Jump to search
| Line 1: | Line 1: | ||
| − | |||
| − | |||
| − | |||
| − | |||
==D8 Repair== | ==D8 Repair== | ||
| Line 32: | Line 28: | ||
::*Disconnect the cables from the Mother Board, GPS and Cellular Modules | ::*Disconnect the cables from the Mother Board, GPS and Cellular Modules | ||
| + | |||
| + | <br> | ||
| + | |||
| + | ==D8 Reprocessing== | ||
| + | |||
| + | Configure for customer | ||
<br> | <br> | ||
Revision as of 17:48, 16 January 2019
D8 Repair
Verify the reported issue.
Check for physical damage to the connectors or case
Motherboard Replacement
Open the DVR case
- Remove the SSD Sled
- Remove the two top screws on the front of the D8
- Remove the 4 screws on the back panel
- Slide the top cover back and slowly lift up
- Disconnect the 3 cables to the Mother Board
- Lift off the Top cover and set aside
Remove Back Panel
- Disconnect the cables from the Mother Board, GPS and Cellular Modules
D8 Reprocessing
Configure for customer