Difference between revisions of "ICV D8 Initial Configuration and Setup"
(Created page with "==ICARvisions== ===Firmware upgrade=== 1.Device must switch off power disconnect the power source before upgrading; 2.Extract the rar file, copy the .crc file to a USB fl...") |
|||
| Line 1: | Line 1: | ||
==ICARvisions== | ==ICARvisions== | ||
| − | ===Firmware upgrade=== | + | ===Firmware upgrade with USB Stick=== |
1.Device must switch off power disconnect the power source before upgrading; | 1.Device must switch off power disconnect the power source before upgrading; | ||
| Line 12: | Line 12: | ||
Attention: Upgrade will need about 3-5 minutes. Make sure power connecting all the time during upgrading | Attention: Upgrade will need about 3-5 minutes. Make sure power connecting all the time during upgrading | ||
| + | |||
| + | <br><br> | ||
| + | |||
| + | ===Firmware upgrade with SD Card=== | ||
| + | |||
| + | 1.Device must switch off power; | ||
| + | |||
| + | 2.Decompress the rar file, copy the .crc file to a SD card, and insert the SD card to the MDVR SD card port. | ||
| + | |||
| + | 3.Power on the MDVR, it will update automatically once the MDVR starts up. and the monitor will display "upgrading..." | ||
| + | |||
| + | 4.Device will automatically restart when the upgrade is complete. | ||
| + | |||
| + | Note: upgrade will need about 3 minutes. Make sure power connecting all the time during upgrading. | ||
<br><br> | <br><br> | ||
Revision as of 18:32, 17 April 2017
ICARvisions
Firmware upgrade with USB Stick
1.Device must switch off power disconnect the power source before upgrading;
2.Extract the rar file, copy the .crc file to a USB flash memory FAT32 format, insert the flash memory to the MDVR USB port.
3.Power on the MDVR(connect the power), it will update automatically once the MDVR starts up. and the monitor will display "upgrading..."
4.Device will automatically restart when the upgrade is complete.
Attention: Upgrade will need about 3-5 minutes. Make sure power connecting all the time during upgrading
Firmware upgrade with SD Card
1.Device must switch off power;
2.Decompress the rar file, copy the .crc file to a SD card, and insert the SD card to the MDVR SD card port.
3.Power on the MDVR, it will update automatically once the MDVR starts up. and the monitor will display "upgrading..."
4.Device will automatically restart when the upgrade is complete.
Note: upgrade will need about 3 minutes. Make sure power connecting all the time during upgrading.