Difference between revisions of "Manufacturing:Top Level Main Board Assembly"

From Idrive
Jump to navigation Jump to search
(Blanked the page)
 
Line 1: Line 1:
−
==Top Level X2 Main Board Assembly==
 
  
−
{| class="wikitable"
 
−
|-
 
−
!'''Top Level Main Board Assembly Materials'''
 
−
|- Idrive X2 Vx.x.x Printer Circuit Board
 
−
|-
 
−
|4GB Pre-Programmed Micro SD card (Contains OS for camera)
 
−
|-
 
−
|8GB Micro SD card (No pre-programming, used for event storage)
 
−
|-
 
−
|2 Lens Holders (11mm Height)
 
−
|-
 
−
|4 Lens Holder screws (2 for each lens holder)
 
−
|-
 
−
|'''DSL-218A-670-F2.0''' Lens for '''Road side''' of the camera (side of the PCB with the power connector)(Lens '''has Text''' on it)
 
−
|-
 
−
|'''DSL-180A-NIR-F2.0''' Lens for '''Driver Side''' of the camera (side of the PCB with the Processor on it)(Lens has '''NO Text''' on it)
 
−
|-
 
−
|X2 LED board assembly
 
−
|-
 
−
|Flat flex Cable
 
−
|-
 
−
|}
 
−
 
−
 
−
'''1.''' Insert the '''Pre-programmed''' 4GB Micro SD card into the SD socket on the '''Driver Side''' of the Main Board.
 
−
 
−
[[File:4gbsd_socket1.jpg|200px|]] [[File:4gbsd_socket2.jpg|325px|]] [[File:4gbsd_socket3.jpg|350px|]]
 
−
 
−
 
−
 
−
'''2.''' Insert the 8GB Micro SD card into the SD socket on the '''Road Side''' of the Main Board.
 
−
 
−
[[File:8gbsd_socket1.jpg|200px|]] [[File:8gbsd_socket2.jpg|325px|]] [[File:8gbsd_socket3.jpg|325px|]]
 
−
 
−
 
−
 
−
'''3.''' Mount of the two Lens Holders to the board
 
−
 
−
'''4.''' Insert the proper lens in the correct side in the Lens Holders(Lenses are glued after programming and focus)
 
−
 
−
'''DSL-180A Lens for Driver Side''' (No markings) ---------------------'''DSL-218A Lens for Road Side''' (Note Markings)
 
−
 
−
[[File:sunex_dsl180c.jpg|250px|]]----------------------------[[File:sunex_dsl218a.jpg|240px]]
 
−
 
−
'''5.''' Connect the LED Board to the Main Board with the Ribbon Cable
 
−
 
−
::- Slide cable into the connectors with the contacts up as shown
 
−
 
−
::- Slide the brown tabs at the sides of the connector to secure cable in place.
 
−
 
−
<span style="color: red"> The LED Board has been modified and the connector is now on the opposite side of the board.
 
−
 
−
<span style="color: red"> We will update the picture once we receive the boards
 
−
 
−
[[File:led_cable_slide_latch_open.jpg|400px|]]    [[File:x2_led_cable_conn.jpg|300px|]]
 
−
 
−
 
−
'''6.''' Advance the Top Level X2 Main Board PCB assembly to the X2 Programming Station
 
−
 
−
<br/><br/>
 

Latest revision as of 21:04, 20 July 2015

Retrieved from "https://admincenter.idriveglobal.com/wiki/index.php?title=Manufacturing:Top_Level_Main_Board_Assembly&oldid=5707"