Difference between revisions of "Filesystem"
Jump to navigation
Jump to search
| Line 1: | Line 1: | ||
| − | X2 | + | '''How to build a X2 filesystem.''' |
| − | + | 1. Use Boundary base filesystem "ltib4-no-x-20130618" as starting point. | |
| − | Changes that have to be applied to the base | + | 2. Prepare an ext4 SD card having "ltib" label. |
| + | |||
| + | 3. Changes that have to be applied to the base filesystem in order to be able to run X2 application: | ||
'''kernel + modules''' | '''kernel + modules''' | ||
run ist.sh under kernel distribution which will copy all needed files to /media/ltib | run ist.sh under kernel distribution which will copy all needed files to /media/ltib | ||
| Line 14: | Line 16: | ||
'''X2 application''' | '''X2 application''' | ||
/root/ | /root/ | ||
| − | + | + x2idr.fw, | |
| − | + | + adresa.cfg, | |
| − | + | + ip.cfg, | |
| − | + | + mac.cfg, | |
| − | + | + size.cfg, | |
| − | + | + run.sh, | |
| − | + | + stream.sh, | |
| − | + | + modules.sh, | |
| − | + | + make_board_links.sh; | |
/root/lib/ | /root/lib/ | ||
| − | + | + libavccodec.so.56.0.101, | |
| − | + | + libavformat.so.56.3.100, | |
| − | + | + libavutil.so.54.7.100, | |
| − | + | + libswresample.so.1.1.100, | |
| − | + | + libswscale.so.3.0.100; | |
/root/modules/ | /root/modules/ | ||
| − | + | + event.ko, | |
| − | + | + rt5572sta.ko; | |
| + | /etc/rc.d/ | ||
| + | + rc.conf < config_services += "idrive", HOSTNAME="Idrive", IPADDR0="10.3.0.254"; | ||
| + | + init.d/idrive | ||
| + | |||
| + | |||
/etc/Wireless/RT2870STA/ | /etc/Wireless/RT2870STA/ | ||
| − | + | + RT2870STA.dat; | |
| − | + | + RT2870STACard.dat; | |
'''USB stick update application''' | '''USB stick update application''' | ||
/root/ | /root/ | ||
| − | + | + update, | |
| − | + | + update_stick_log.txt; | |
/etc/udev/rules.d/01-usb-stick.rules; | /etc/udev/rules.d/01-usb-stick.rules; | ||
/lib/udev | /lib/udev | ||
| − | + | + update.sh | |
| − | + | + reboot.sh | |
| − | + | + update | |
'''wpa supplicant - WIFI''' | '''wpa supplicant - WIFI''' | ||
/root/ | /root/ | ||
| − | + | + wpa_supplicant, | |
| − | + | + wpa_passphrase; | |
'''pppd - 3G module''' | '''pppd - 3G module''' | ||
/etc/ppp/* | /etc/ppp/* | ||
/usr/sbin/ | /usr/sbin/ | ||
| − | + | + pppd | |
| − | + | + chat | |
| − | + | + ln -s /etc/ppp/resolv.conf /etc/resolv.conf | |
| + | |||
| + | 4. Copy the files structure to the SD Card. | ||
Revision as of 12:28, 23 February 2015
How to build a X2 filesystem.
1. Use Boundary base filesystem "ltib4-no-x-20130618" as starting point.
2. Prepare an ext4 SD card having "ltib" label.
3. Changes that have to be applied to the base filesystem in order to be able to run X2 application:
kernel + modules run ist.sh under kernel distribution which will copy all needed files to /media/ltib
/etc/fstab - 128MB RAM disk and SD card auto mount Edit /etc/fstab and add the following lines: tmpfs /mnt/ramdisk tmpfs defaults,noatime,nosuid,nodev,noexec,mode=1777,size=128M 0 0 /dev/mmcblk1p1 /mnt/sdcard auto defaults 0 0
X2 application /root/ + x2idr.fw, + adresa.cfg, + ip.cfg, + mac.cfg, + size.cfg, + run.sh, + stream.sh, + modules.sh, + make_board_links.sh; /root/lib/ + libavccodec.so.56.0.101, + libavformat.so.56.3.100, + libavutil.so.54.7.100, + libswresample.so.1.1.100, + libswscale.so.3.0.100; /root/modules/ + event.ko, + rt5572sta.ko; /etc/rc.d/ + rc.conf < config_services += "idrive", HOSTNAME="Idrive", IPADDR0="10.3.0.254"; + init.d/idrive
/etc/Wireless/RT2870STA/ + RT2870STA.dat; + RT2870STACard.dat;
USB stick update application /root/ + update, + update_stick_log.txt; /etc/udev/rules.d/01-usb-stick.rules; /lib/udev + update.sh + reboot.sh + update
wpa supplicant - WIFI /root/ + wpa_supplicant, + wpa_passphrase;
pppd - 3G module /etc/ppp/* /usr/sbin/ + pppd + chat + ln -s /etc/ppp/resolv.conf /etc/resolv.conf
4. Copy the files structure to the SD Card.