Revision as of 17:12, 4 November 2014

This is a sandbox area to create customer wiki updates before they go live on the customer wiki site

<br\><br\>

@@ Line 1: / Line 1: @@
 =This is a sandbox area to create customer wiki updates before they go live on the customer wiki site=
-work on the section here and then clip it into the live documents when new version is released and the document is complete - Mark
+<br\><br\>
-==VPN Client scratch space initial steps then elaborate==
-===Connect===
-Run Winbox.exe, select router from list and click connect
-===Configure interfaces===
-Select "Interfaces" from the left menu and enable both "wlan1" and "ppp-out1".
-===3G stuff N/A for main wiki===
-Connect your 3G USB dongle and restart router.
-Return on "Interface List" and double-click "ppp-out1" and make sure that "usb1" option is selected. If the "Port" drop-down list is empty then your 3G dongle is not supported.
-Our 3G USB worked by default without any other configuration. Click on "Advanced Mode" if your SIM does require mobile carrier configuration.
-===Configure on board Wifi===
-Return on "Interface List" double-click "wlan1", select "Wireless" tab and complete the fields as in picture.
-===Configure Internet Bridge===
-Select "Bridge" from the left menu and add new bridge.
-===Configure Port Bridge 1===
-From the same window select "Ports" tab and add the following interfaces as in picture.
-===IP Address===
-Select IP->Address List from the left menu and add a new address.
-===Configure Internal Bridge===
-Return to "Bridge" and add a new bridge.
-Make sure the "ARP" is disabled and enter the MAC Address: 00:00:5E:80:01:01 then select "STP" tab and check "Protocol Mode: rstp".
-===Configure Port Bridge 2===
-Select "Ports" tab from "Bridge" interface and add "ether1" and "wlan1" to "bridge_tunnel".
-===PPP 3G only?===
-[[http://en.wikipedia.org/wiki/Point-to-Point_Protocol | "Point to Point Protocol"]]
-Select "PPP" from the left menu then go to "Profiles" tab and add new profile.
-Complete the fields then select "Protocols" tab and check "yes" under "Use Encryption".
-===SSTP over internet connection?===
-[[http://en.wikipedia.org/wiki/Secure_Socket_Tunneling_Protocol |"Secure Socket Tunneling Protocol"]]
-Return to "Interface List" and add new "SSTP Client".
-===Dial out - 3G Wireded or both?===
-In the "Dial Out" fill "Connect To:" with the VPN Server public IP, set port to 1723, enter the user name and password that you have created on VPN Server.
-Uncheck "pap" and "chap" boxes from "Allow".
-If the VPN Server is configured the status will appear as connected.
-If the VPN Server is not configured then check [[Configure VPN Server]].

Difference between revisions of "Temporary editing wiki space"

Revision as of 17:12, 4 November 2014

This is a sandbox area to create customer wiki updates before they go live on the customer wiki site

Navigation menu

Search