Difference between revisions of "Transfer Point Documentation"
| Line 30: | Line 30: | ||
The Transfer Point may be mounted to the side of a building, pole or other structure. It should be mounted at a height which allows for line of site to the vehicles which are to be downloaded. (Typically 12 - 20 feet off of the ground) | The Transfer Point may be mounted to the side of a building, pole or other structure. It should be mounted at a height which allows for line of site to the vehicles which are to be downloaded. (Typically 12 - 20 feet off of the ground) | ||
| + | |||
| + | [[File:jeffs-pic1.jpg|700px|]] | ||
<br\><br\> | <br\><br\> | ||
Revision as of 22:34, 11 September 2013
Idrive Transfer Point Documentation
<br\><br\>
Description
The Idrive Transfer Point is used to provide WiFi coverage for remote parking areas to facilitate download of Idrive X1 devices. The downloads are transferred to the Idrive Base Station over a virtual private network (VPN).
<br\><br\>
Options
The basic Transfer Point consists of a Weatherproof enclosure containing VPN Router with a built in WiFi Access point. For additional Wifi coverage the Transfer point can accomodate up to two more Wifi access points
<br\><br\>
Installation
<br\><br\>
Requirements
120V AC power
Internet Connection with a Fixed IP Address
<br\><br\>
Mounting
The Transfer Point may be mounted to the side of a building, pole or other structure. It should be mounted at a height which allows for line of site to the vehicles which are to be downloaded. (Typically 12 - 20 feet off of the ground)
<br\><br\>
Connections
<br\><br\>
Electrical
<br\><br\>
Network
<br\><br\>
Satellite Access points
<br\><br\>