Difference between revisions of "Manufacturing:AI Programmer Setup"
Jump to navigation
Jump to search
(Created page with "=AI PROGRAMMER SETUP(WIRING)= *Connect Programmer to a 12 V Power Supplier – Power cable connects to the J2 connector on Programmer *Connect Programmer to PC – the cable...") |
|||
| Line 2: | Line 2: | ||
*Connect Programmer to a 12 V Power Supplier – Power cable connects to the J2 connector on Programmer | *Connect Programmer to a 12 V Power Supplier – Power cable connects to the J2 connector on Programmer | ||
| + | |||
| + | [[File:11.png]] | ||
| + | |||
*Connect Programmer to PC – the cable connects to the J5 connector on Programmer and to the USB slot from USB Hub | *Connect Programmer to PC – the cable connects to the J5 connector on Programmer and to the USB slot from USB Hub | ||
| + | |||
| + | [[File:22.png]] | ||
| + | |||
*Connect Serial console cable to Programmer – it connects to the J4 connector on Programmer | *Connect Serial console cable to Programmer – it connects to the J4 connector on Programmer | ||
| + | |||
| + | [[File:33.png]] | ||
| + | |||
*Insert Main Board into the Programmer holding fixture (secure its position with the plexiglass catcher) | *Insert Main Board into the Programmer holding fixture (secure its position with the plexiglass catcher) | ||
| + | |||
| + | [[File:44.png]] | ||
| + | |||
*Connect Programmer to X3 (AI) Main Board – Power Signal cable connects to the J3 connector on Programmer and to the J1 on Main Board | *Connect Programmer to X3 (AI) Main Board – Power Signal cable connects to the J3 connector on Programmer and to the J1 on Main Board | ||
| + | |||
| + | [[File:55.png]] | ||
| + | |||
*Connect X3 (AI) Main Board to PC – the cable connects to the Micro USB J9 connector on Main Board and to the USB slot from USB Hub. | *Connect X3 (AI) Main Board to PC – the cable connects to the Micro USB J9 connector on Main Board and to the USB slot from USB Hub. | ||
| + | |||
| + | [[File:66.png]] | ||
| + | |||
USB cables will be connected to PC through a USB Hub (external power supply) | USB cables will be connected to PC through a USB Hub (external power supply) | ||
| + | |||
| + | [[File:77.jpg]] | ||
Latest revision as of 10:12, 25 March 2020
AI PROGRAMMER SETUP(WIRING)
- Connect Programmer to a 12 V Power Supplier – Power cable connects to the J2 connector on Programmer
- Connect Programmer to PC – the cable connects to the J5 connector on Programmer and to the USB slot from USB Hub
- Connect Serial console cable to Programmer – it connects to the J4 connector on Programmer
- Insert Main Board into the Programmer holding fixture (secure its position with the plexiglass catcher)
- Connect Programmer to X3 (AI) Main Board – Power Signal cable connects to the J3 connector on Programmer and to the J1 on Main Board
- Connect X3 (AI) Main Board to PC – the cable connects to the Micro USB J9 connector on Main Board and to the USB slot from USB Hub.
USB cables will be connected to PC through a USB Hub (external power supply)
