Difference between revisions of "D8 repair and reprocessing"
Jump to navigation
Jump to search
| Line 36: | Line 36: | ||
=====GPS Module===== | =====GPS Module===== | ||
| − | Remove the two screws securing the module. | + | ::*Remove the two screws securing the module. |
| − | Apply Blue Locktite to the mounting studs on the new board | + | ::*Apply Blue Locktite to the mounting studs on the new board |
| − | Insert the two screws to secure the module (do not over torque) | + | ::*Insert the two screws to secure the module (do not over torque) |
<br> | <br> | ||
| Line 46: | Line 46: | ||
=====Cellular Module===== | =====Cellular Module===== | ||
| − | Remove the two screws securing the module. | + | ::*Remove the two screws securing the module. |
| − | Apply Blue Locktite to the mounting studs on the new board | + | ::*Apply Blue Locktite to the mounting studs on the new board |
| − | Insert the module into the socket | + | ::*Insert the module into the socket |
| − | Insert the two screws to secure the module (do not over torque) | + | ::*Insert the two screws to secure the module (do not over torque) |
<br> | <br> | ||
| Line 58: | Line 58: | ||
=====SIM Card===== | =====SIM Card===== | ||
| − | Push the button to the right of the SIM socket. | + | ::*Push the button to the right of the SIM socket. |
| − | Remove the SIM and insert it into the socket on the new Mother Board | + | ::*Remove the SIM and insert it into the socket on the new Mother Board |
| − | Record the last 4 digits of the SIM Card | + | ::*Record the last 4 digits of the SIM Card |
| + | |||
| + | <br> | ||
| + | |||
| + | ====Remove and Replce th Motherboard==== | ||
| + | |||
| + | ::*Remove the 7 screws holding the board in the case | ||
| + | |||
| + | ::*Verify that the replacement board has all of the same Heat tape and foam rubber | ||
| + | |||
| + | ::*Apply Blue Locktite to the mounting studs on the case | ||
| + | |||
| + | ::*Insert the 7 screws to secure the board (do not over torque) | ||
<br> | <br> | ||
Revision as of 18:03, 16 January 2019
D8 Repair
Verify the reported issue.
Check for physical damage to the connectors or case
Motherboard Replacement
Open the DVR case
- Remove the SSD Sled
- Remove the two top screws on the front of the D8
- Remove the 4 screws on the back panel
- Slide the top cover back and slowly lift up
- Disconnect the 3 cables to the Mother Board
- Lift off the Top cover and set aside
Remove Back Panel
- Disconnect the cables from the Mother Board, GPS and Cellular Modules
Move GPS, SIM and Cellular Module to replacement board
GPS Module
- Remove the two screws securing the module.
- Apply Blue Locktite to the mounting studs on the new board
- Insert the two screws to secure the module (do not over torque)
Cellular Module
- Remove the two screws securing the module.
- Apply Blue Locktite to the mounting studs on the new board
- Insert the module into the socket
- Insert the two screws to secure the module (do not over torque)
SIM Card
- Push the button to the right of the SIM socket.
- Remove the SIM and insert it into the socket on the new Mother Board
- Record the last 4 digits of the SIM Card
Remove and Replce th Motherboard
- Remove the 7 screws holding the board in the case
- Verify that the replacement board has all of the same Heat tape and foam rubber
- Apply Blue Locktite to the mounting studs on the case
- Insert the 7 screws to secure the board (do not over torque)
D8 Reprocessing
Configure for customer