Revision as of 19:56, 25 July 2017

Process steps for Assembling an idrive 4 channel video splitter (Mount 4 PCBs, Affix Input Faceplate, Affix Output Faceplate, Secure 4 Nuts on Input side, Secure 8 nuts on output side)

Slide Each PCB board sequentially in the 4 slots, making sure all boards have the same orientation as in the image below

Note: Use the idrive logo on the case as a reference point when determining correct orientation

Place the Input face-plate flush with the input plugs and use four of the provided screws to secure it to the case

Note: The input side of the PCB has only 1 plug as well as four small led indicator lights

Place the Output face-plate flush with the output plugs and use four of the provided screws to secure it to the case

Note: The output side of the PCB has 2 plugs

File:D8 Output Faceplate Install.jpg

@@ Line 28: / Line 28: @@
-===Secure 4 Input Nuts===
+===Step 4: Secure 4 Input Nuts===
 * Fasten the 4 input nuts tightly to the case as in the image below
@@ Line 35: / Line 35: @@
-===Secure 8 Output Nuts===
+===Step 5: Secure 8 Output Nuts===
 * Fasten the 8 output nuts tightly to the case as in the image below
 [[File:D8_Output_Nuts_Install.jpg|400px|]]