Difference between revisions of "ICV D8 Initial Configuration and Setup"

Revision as of 19:19, 17 April 2017

Admin Passwd 888888

1.Device must switch off power disconnect the power source before upgrading;

2.Extract the rar file, copy the .crc file to a USB flash memory FAT32 format, insert the flash memory to the MDVR USB port.

3.Power on the MDVR(connect the power), it will update automatically once the MDVR starts up. and the monitor will display "upgrading..."

4.Device will automatically restart when the upgrade is complete.

Attention: Upgrade will need about 3-5 minutes. Make sure power connecting all the time during upgrading

1.Device must switch off power;

2.Decompress the rar file, copy the .crc file to a SD card, and insert the SD card to the MDVR SD card port.

3.Power on the MDVR, it will update automatically once the MDVR starts up. and the monitor will display "upgrading..."

4.Device will automatically restart when the upgrade is complete.

Note: upgrade will need about 3 minutes. Make sure power connecting all the time during upgrading.

@@ Line 1: / Line 1: @@
 ==ICARvisions==
+<br><br>
+==Basic Settings==
+Admin Passwd 888888
+===General Settings===
+<br><br>
+===Channel Mode===
+<br><br>
+===Record Settings===
+<br><br>
+===Alarm Settings===
+<br><br>
+===Tools Settings===
+<br><br>
+===Peripherals Settings===
+<br><br>
+===Search===
+<br><br>
+===System Info===
+<br><br>
 ===Firmware upgrade with USB Stick===