Difference between revisions of "D8 Initial Configuration and Setup"

From Idrive
Jump to navigation Jump to search
Line 14: Line 14:
  
 
Install the SIM card  (what SIM, how to document etc)
 
Install the SIM card  (what SIM, how to document etc)
−
 
  
 
<br><br>
 
<br><br>
Line 237: Line 236:
  
 
:* <ChlName __id="0" ChlName="CH1"  (Change "CH1" to "Crane front Left" etc?)
 
:* <ChlName __id="0" ChlName="CH1"  (Change "CH1" to "Crane front Left" etc?)
 +
 +
<br><br>
 +
 +
==Camera Connections==
 +
 +
 +
On the Back Panel
 +
 +
AV IN #1 connector - White - CH1 Yellow = CH2
 +
 +
AV IN #2 connector - White - CH3 Yellow = CH4
 +
 +
AV IN #3 connector - White - CH5 Yellow = CH6
 +
 +
AV IN #4 connector - White - CH7 Yellow = CH8
 +
 +
<br><br>

Revision as of 23:18, 14 March 2017

D8 Configuration and Setup

Assemble System

Place default configuration (Parameters file on the SSD

Install SSD

put Batteries in the remote (batteries not included w/D8)

Plug in the D8 Power cable (NOT a D4 Cable!)

Plug in the 16 wire Harness and attach the StarTech USB device

Install the SIM card (what SIM, how to document etc)



Import Configuration "Parameters" File

Press "login" button on the remote

enter password 666666 (admin)press "OK"

navigate using left, right, up, down buttons to "Tools > Parameters"

Click "Import Parameters" (Yes)



Parameters file differences

Comparison of Al's initial config and the default config

<KeyPara

  • MD5 different


<BaseSetup

  • TimeZone (Al = 7 Default = 20)
  • timingtime (Al = "00:00:00" Default = "06:30:00")
  • OprTimeOut (Al = 120 Default = 30)


<TerminalSetup

  • device_num (Al = 225001 Default = 10000)
  • Phonenumber (Al = Blank Default = 1000)
  • company_name (Al = "idr" Default = Blank)
  • Authentication (Al = "225001" Default = 10000)


<RecordSet

  • CameraType (Al = "0" Default = 1)


<RecordSetMainChNoSet

  • Resolution (Al = "2" Default = 0)


<RecordSetMirrorChNoSet

  • isRec (Al = "1" Default = 0)


<SystemPowerSet

  • PowerOnTime (Al = "00:00:00" Default = 06:00:00)
  • PowerOffTime (Al = "00:00:00" Default = 22:00:00)


<MonitorSet

  • showNum (Al = 9 Default = 8)


<NetWorkSet

  • IpAddr (Al = 10.7.7.14 Default = 192.168.1.80)
  • GateWay (Al = 10.7.7.1 Default 192.168.2)
  • DNS1 (Al = 65.32.5.111 Default 192.168.1.2)
  • DNS2 (Al = 65.32.5.111 Default 192.168.1.2)

AL:

<CenterNetwork __id="0" Enable="1" Type="0" CenterIP="72.186.112.19" ContrlPort="6608" DomainName="" />

<CenterNetwork __id="1" Enable="1" Type="0" CenterIP="10.7.7.2" ContrlPort="6608" DomainName="" />

<CenterNetwork __id="2" Enable="1" Type="0" CenterIP="0.0.0.0" ContrlPort="0" DomainName="" />

<CenterNetwork __id="3" Enable="1" Type="0" CenterIP="0.0.0.0" ContrlPort="0" DomainName="" />

<CenterNetwork __id="4" Enable="1" Type="0" CenterIP="0.0.0.0" ContrlPort="0" DomainName="" />

<CenterNetwork __id="5" Enable="1" Type="0" CenterIP="0.0.0.0" ContrlPort="0" DomainName="" />

<CenterNetwork __id="6" Enable="0" Type="0" CenterIP="0.0.0.0" ContrlPort="0" DomainName="" />

<CenterNetwork __id="7" Enable="1" Type="0" CenterIP="0.0.0.0" ContrlPort="21" DomainName="" />

Default:

<CenterNetwork __id="0" Enable="1" Type="0" CenterIP="115.159.59.201" ContrlPort="6608" DomainName="" />

<CenterNetwork __id="1" Enable="1" Type="0" CenterIP="192.168.1.10" ContrlPort="6608" DomainName="" />

<CenterNetwork __id="2" Enable="1" Type="0" CenterIP="0.0.0.0" ContrlPort="0" DomainName="" />

<CenterNetwork __id="3" Enable="1" Type="0" CenterIP="0.0.0.0" ContrlPort="0" DomainName="" />

<CenterNetwork __id="4" Enable="1" Type="0" CenterIP="0.0.0.0" ContrlPort="0" DomainName="" />

<CenterNetwork __id="5" Enable="1" Type="0" CenterIP="0.0.0.0" ContrlPort="0" DomainName="" />

<CenterNetwork __id="6" Enable="0" Type="0" CenterIP="0.0.0.0" ContrlPort="0" DomainName="" />

<CenterNetwork __id="7" Enable="1" Type="0" CenterIP="113.108.120.47" ContrlPort="21" DomainName="" /


<DialUpSet

  • APN (Al = data641003 Default = 3gnet)
  • UserName (Al = Blank Default = card)
  • UserPwd (Al = Blank Default = card)
  • SimICCID (Al & Default = "89860115851042424258") Why are these the same?
  • SmsCenter (Al = Blank Default = +8613010888500)


<WifiSet

  • Encrypt (Al = 2 Default = 3)
  • SSID (Al = Blank Default = 888
  • Pwd (Al = Blank Default = 88888888)
  • IpAddr (Al = 255.255.255.255 Default = 192.168.2.10)
  • SubNet (Al = 255.255.255.255 Default = 255.255.255.0)
  • GateWay (Al = 255.255.255.255 Default = 192.168.2.1)
  • Purpose (Al = 16 Default =0)

<AlarmSet

Al: 

   <SensorAlarmSet __id="0" Name="Exigency" Enable="1" isRecord="1" LimitValue="1" HoldTime="3" DelayTime="1" linkage="32" HomePageChannel="0" />
   <SensorAlarmSet __id="1" Name="OFF" Enable="0" isRecord="0" LimitValue="1" HoldTime="3" DelayTime="1" linkage="0" HomePageChannel="0" />
   <SensorAlarmSet __id="2" Name="OFF" Enable="0" isRecord="0" LimitValue="1" HoldTime="3" DelayTime="1" linkage="0" HomePageChannel="0" />
   <SensorAlarmSet __id="3" Name="OFF" Enable="0" isRecord="0" LimitValue="1" HoldTime="3" DelayTime="1" linkage="0" HomePageChannel="0" />
   <SensorAlarmSet __id="4" Name="OFF" Enable="0" isRecord="0" LimitValue="1" HoldTime="3" DelayTime="1" linkage="0" HomePageChannel="0" />
   <SensorAlarmSet __id="5" Name="OFF" Enable="0" isRecord="0" LimitValue="1" HoldTime="3" DelayTime="1" linkage="0" HomePageChannel="0" />
   <SensorAlarmSet __id="6" Name="OFF" Enable="0" isRecord="0" LimitValue="1" HoldTime="3" DelayTime="0" linkage="0" HomePageChannel="0" />
   <SensorAlarmSet __id="7" Name="OFF" Enable="0" isRecord="0" LimitValue="1" HoldTime="3" DelayTime="1" linkage="0" HomePageChannel="0" />
   <SensorAlarmSet __id="8" Name="IO9" Enable="0" isRecord="0" LimitValue="1" HoldTime="3" DelayTime="1" linkage="0" HomePageChannel="0" />
   <SensorAlarmSet __id="9" Name="IO10" Enable="0" isRecord="0" LimitValue="1" HoldTime="3" DelayTime="1" linkage="0" HomePageChannel="0" />
   <SensorAlarmSet __id="10" Name="IO11" Enable="0" isRecord="0" LimitValue="1" HoldTime="3" DelayTime="1" linkage="0" HomePageChannel="0" />
   <SensorAlarmSet __id="11" Name="IO12" Enable="0" isRecord="0" LimitValue="1" HoldTime="3" DelayTime="1" linkage="0" HomePageChannel="0" />
   <SensorAlarmSet __id="12" Name="IO13" Enable="0" isRecord="0" LimitValue="1" HoldTime="3" DelayTime="1" linkage="0" HomePageChannel="0" />
   <SensorAlarmSet __id="13" Name="IO14" Enable="0" isRecord="0" LimitValue="1" HoldTime="3" DelayTime="1" linkage="0" HomePageChannel="0" />
   <SensorAlarmSet __id="14" Name="IO15" Enable="0" isRecord="0" LimitValue="1" HoldTime="3" DelayTime="1" linkage="0" HomePageChannel="0" />
   <SensorAlarmSet __id="15" Name="IO16" Enable="0" isRecord="0" LimitValue="1" HoldTime="3" DelayTime="1" linkage="0" HomePageChannel="0" />

Default: 

   <SensorAlarmSet __id="0" Name="IO1" Enable="0" isRecord="0" LimitValue="1" HoldTime="3" DelayTime="1" linkage="0" HomePageChannel="0" />
   <SensorAlarmSet __id="1" Name="IO2" Enable="0" isRecord="0" LimitValue="1" HoldTime="3" DelayTime="1" linkage="0" HomePageChannel="0" />
   <SensorAlarmSet __id="2" Name="IO3" Enable="0" isRecord="0" LimitValue="1" HoldTime="3" DelayTime="1" linkage="0" HomePageChannel="0" />
   <SensorAlarmSet __id="3" Name="IO4" Enable="0" isRecord="0" LimitValue="1" HoldTime="3" DelayTime="1" linkage="0" HomePageChannel="0" />
   <SensorAlarmSet __id="4" Name="IO5" Enable="0" isRecord="0" LimitValue="1" HoldTime="3" DelayTime="1" linkage="0" HomePageChannel="0" />
   <SensorAlarmSet __id="5" Name="IO6" Enable="0" isRecord="0" LimitValue="1" HoldTime="3" DelayTime="1" linkage="0" HomePageChannel="0" />
   <SensorAlarmSet __id="6" Name="IO7" Enable="0" isRecord="0" LimitValue="1" HoldTime="3" DelayTime="1" linkage="0" HomePageChannel="0" />
   <SensorAlarmSet __id="7" Name="IO8" Enable="0" isRecord="0" LimitValue="1" HoldTime="3" DelayTime="1" linkage="0" HomePageChannel="0" />
   <SensorAlarmSet __id="8" Name="IO9" Enable="0" isRecord="0" LimitValue="1" HoldTime="3" DelayTime="1" linkage="0" HomePageChannel="0" />
   <SensorAlarmSet __id="9" Name="IO10" Enable="0" isRecord="0" LimitValue="1" HoldTime="3" DelayTime="1" linkage="0" HomePageChannel="0" />
   <SensorAlarmSet __id="10" Name="IO11" Enable="0" isRecord="0" LimitValue="1" HoldTime="3" DelayTime="1" linkage="0" HomePageChannel="0" />
   <SensorAlarmSet __id="11" Name="IO12" Enable="0" isRecord="0" LimitValue="1" HoldTime="3" DelayTime="1" linkage="0" HomePageChannel="0" />
   <SensorAlarmSet __id="12" Name="IO13" Enable="0" isRecord="0" LimitValue="1" HoldTime="3" DelayTime="1" linkage="0" HomePageChannel="0" />
   <SensorAlarmSet __id="13" Name="IO14" Enable="0" isRecord="0" LimitValue="1" HoldTime="3" DelayTime="1" linkage="0" HomePageChannel="0" />
   <SensorAlarmSet __id="14" Name="IO15" Enable="0" isRecord="0" LimitValue="1" HoldTime="3" DelayTime="1" linkage="0" HomePageChannel="0" />
   <SensorAlarmSet __id="15" Name="IO16" Enable="0" isRecord="0" LimitValue="1" HoldTime="3" DelayTime="1" linkage="0" HomePageChannel="0" />


<SubStreamSet

  • bitRate (Al = "400" Default = 160)
  • targetFrame (Al = ="25" Default = 4)


<UserParam

AL:

intParam0="255" intParam1="255" intParam2="255" intParam3="255" intParam4="255" intParam5="255" intParam6="255" intParam7="255" doubleParam="0.000000" charParam=""

Default:

intParam0="0" intParam1="0" intParam2="0" intParam3="0" intParam4="0" intParam5="0" intParam6="0" intParam7="0" doubleParam="0.000000" charParam=""





Things we may need/want to set

<SystemInfo Product_List_info , Manufacturer

<SecuritySet

  • AdminPassword (Default 666666)
  • UserPassword (Default 000000)

<Front0sdSet

  • <ChlName __id="0" ChlName="CH1" (Change "CH1" to "Crane front Left" etc?)



Camera Connections

On the Back Panel

AV IN #1 connector - White - CH1 Yellow = CH2

AV IN #2 connector - White - CH3 Yellow = CH4

AV IN #3 connector - White - CH5 Yellow = CH6

AV IN #4 connector - White - CH7 Yellow = CH8



Retrieved from "https://admincenter.idriveglobal.com/wiki/index.php?title=D8_Initial_Configuration_and_Setup&oldid=6590"