Difference between revisions of "D8 Initial Configuration and Setup"
| Line 30: | Line 30: | ||
Comparison of Al's initial config and the default config | Comparison of Al's initial config and the default config | ||
| − | <KeyPara | + | '''<KeyPara''' |
:*MD5 different | :*MD5 different | ||
| − | <BaseSetup | + | '''<BaseSetup''' |
:* TimeZone (Al = 7 Default = 20) | :* TimeZone (Al = 7 Default = 20) | ||
| Line 44: | Line 44: | ||
| − | <TerminalSetup | + | '''<TerminalSetup''' |
:* device_num (Al = 225001 Default = 10000) | :* device_num (Al = 225001 Default = 10000) | ||
| Line 55: | Line 55: | ||
| − | <RecordSet | + | '''<RecordSet''' |
:* CameraType (Al = "0" Default = 1) | :* CameraType (Al = "0" Default = 1) | ||
| − | <RecordSetMainChNoSet | + | '''<RecordSetMainChNoSet''' |
:* Resolution (Al = "2" Default = 0) | :* Resolution (Al = "2" Default = 0) | ||
| − | <RecordSetMirrorChNoSet | + | '''<RecordSetMirrorChNoSet''' |
:* isRec (Al = "1" Default = 0) | :* isRec (Al = "1" Default = 0) | ||
| − | <SystemPowerSet | + | '''<SystemPowerSet''' |
:* PowerOnTime (Al = "00:00:00" Default = 06:00:00) | :* PowerOnTime (Al = "00:00:00" Default = 06:00:00) | ||
| Line 77: | Line 77: | ||
| − | <MonitorSet | + | '''<MonitorSet''' |
:* showNum (Al = 9 Default = 8) | :* showNum (Al = 9 Default = 8) | ||
| − | <NetWorkSet | + | '''<NetWorkSet''' |
:* IpAddr (Al = 10.7.7.14 Default = 192.168.1.80) | :* IpAddr (Al = 10.7.7.14 Default = 192.168.1.80) | ||
| Line 129: | Line 129: | ||
| + | '''<DialUpSet''' | ||
| + | :* APN (Al = data641003 Default = 3gnet) | ||
| + | |||
| + | :* UserName (Al = Blank Default = card) | ||
| + | |||
| + | :* UserPwd (Al = Blank Default = card) | ||
| + | |||
| + | :* SimICCID (Al & Default = "89860115851042424258") | ||
| + | |||
| + | :* SmsCenter (Al = Blank Default = +8613010888500) | ||
Revision as of 22:09, 14 March 2017
D8 Configuration and Setup
Assemble System
Install SSD
put Batteries in the remote (batteries not included w/D8)
Plug in the D8 Power cable (NOT a D4 Cable!)
Plug in the 16 wire Harness and attach the StarTech USB device
Import Configuration "Parameters" File
Press login button
enter password 666666 (admin)press "OK"
navigate to "Tools > Parameters"
Click "Import Parameters" (Yes)
Parameters file differences
Comparison of Al's initial config and the default config
<KeyPara
- MD5 different
<BaseSetup
- TimeZone (Al = 7 Default = 20)
- timingtime (Al = "00:00:00" Default = "06:30:00")
- OprTimeOut (Al = 120 Default = 30)
<TerminalSetup
- device_num (Al = 225001 Default = 10000)
- Phonenumber (Al = Blank Default = 1000)
- company_name (Al = "idr" Default = Blank)
- Authentication (Al = "225001" Default = 10000)
<RecordSet
- CameraType (Al = "0" Default = 1)
<RecordSetMainChNoSet
- Resolution (Al = "2" Default = 0)
<RecordSetMirrorChNoSet
- isRec (Al = "1" Default = 0)
<SystemPowerSet
- PowerOnTime (Al = "00:00:00" Default = 06:00:00)
- PowerOffTime (Al = "00:00:00" Default = 22:00:00)
<MonitorSet
- showNum (Al = 9 Default = 8)
<NetWorkSet
- IpAddr (Al = 10.7.7.14 Default = 192.168.1.80)
- GateWay (Al = 10.7.7.1 Default 192.168.2
- DNS1 (Al = 65.32.5.111 Default 192.168.1.2
- DNS2 (Al = 65.32.5.111 Default 192.168.1.2
AL:
<CenterNetwork __id="0" Enable="1" Type="0" CenterIP="72.186.112.19" ContrlPort="6608" DomainName="" />
<CenterNetwork __id="1" Enable="1" Type="0" CenterIP="10.7.7.2" ContrlPort="6608" DomainName="" />
<CenterNetwork __id="2" Enable="1" Type="0" CenterIP="0.0.0.0" ContrlPort="0" DomainName="" />
<CenterNetwork __id="3" Enable="1" Type="0" CenterIP="0.0.0.0" ContrlPort="0" DomainName="" />
<CenterNetwork __id="4" Enable="1" Type="0" CenterIP="0.0.0.0" ContrlPort="0" DomainName="" />
<CenterNetwork __id="5" Enable="1" Type="0" CenterIP="0.0.0.0" ContrlPort="0" DomainName="" />
<CenterNetwork __id="6" Enable="0" Type="0" CenterIP="0.0.0.0" ContrlPort="0" DomainName="" />
<CenterNetwork __id="7" Enable="1" Type="0" CenterIP="0.0.0.0" ContrlPort="21" DomainName="" />
Default:
<CenterNetwork __id="0" Enable="1" Type="0" CenterIP="115.159.59.201" ContrlPort="6608" DomainName="" />
<CenterNetwork __id="1" Enable="1" Type="0" CenterIP="192.168.1.10" ContrlPort="6608" DomainName="" />
<CenterNetwork __id="2" Enable="1" Type="0" CenterIP="0.0.0.0" ContrlPort="0" DomainName="" />
<CenterNetwork __id="3" Enable="1" Type="0" CenterIP="0.0.0.0" ContrlPort="0" DomainName="" />
<CenterNetwork __id="4" Enable="1" Type="0" CenterIP="0.0.0.0" ContrlPort="0" DomainName="" />
<CenterNetwork __id="5" Enable="1" Type="0" CenterIP="0.0.0.0" ContrlPort="0" DomainName="" />
<CenterNetwork __id="6" Enable="0" Type="0" CenterIP="0.0.0.0" ContrlPort="0" DomainName="" />
<CenterNetwork __id="7" Enable="1" Type="0" CenterIP="113.108.120.47" ContrlPort="21" DomainName="" /
<DialUpSet
- APN (Al = data641003 Default = 3gnet)
- UserName (Al = Blank Default = card)
- UserPwd (Al = Blank Default = card)
- SimICCID (Al & Default = "89860115851042424258")
- SmsCenter (Al = Blank Default = +8613010888500)
Things we may need/want to set
<SystemInfo Product_List_info , Manufacturer
<SecuritySet
- AdminPassword (Default 666666)
- UserPassword (Default 000000)
<Front0sdSet
- <ChlName __id="0" ChlName="CH1" (Change "CH1" to "Crane front Left" etc?)