Difference between revisions of "Dezactivare permanenta Driver Signature Enforcement"

Latest revision as of 10:37, 8 October 2015

Disabling Driver Signature Enforcement In Windows 8 Permanently

Step 1. Open the Windows command promt as “Run as Administrator”.

Step 2. Run “bcdedit -set loadoptions DISABLE_INTEGRITY_CHECKS” (without the “”).

Step 3. To finalize the process run “bcdedit -set TESTSIGNING ON” (without the “”).

Step 4. Reboot and you’re done.

This method it leaves a watermark saying you are in test mode until you disable it again.

WARNING: if the procedure is executed remotely, the reboot should be executed with the fallowing command from Run or cmd.exe:

shutdown -r -f -t 0

to avoid hanging up the restart.

@@ Line 11: / Line 11: @@
 This method it leaves a watermark saying you are in test mode until you disable it again.
-'''ATENTIE''': daca se face aceasta procedura remote, restartul ar trebui dat cu comanda:
+'''WARNING''': if the procedure is executed remotely, the reboot should be executed with the fallowing command from Run or cmd.exe:
 ''shutdown -r -f -t 0''
-din Run sau cmd.exe. Altfel exista posibilitatea sa ramana agatat restartul.
+to avoid hanging up the restart.