Difference between revisions of "USB Config Files"

From Idrive
Jump to navigation Jump to search
 
(6 intermediate revisions by the same user not shown)
Line 54: Line 54:
  
 
<br>
 
<br>
−
old
 
  
 
==shock.cfg - Setting of G-force in old X1==
 
==shock.cfg - Setting of G-force in old X1==
  
−
 
+
<pre>
 
#//eveniment pe acceleratie
 
#//eveniment pe acceleratie
 
#WriteRegistru(CTRL_REG1,0x87);
 
#WriteRegistru(CTRL_REG1,0x87);
Line 78: Line 77:
 
#ReadRegistru(FF_WU_ACK);
 
#ReadRegistru(FF_WU_ACK);
 
0x32  0x00  0x01
 
0x32  0x00  0x01
 +
</pre>
 +
 +
<br>
 +
 +
==size.cfg for X1P==
 +
==size.cfg File Format==
 +
 +
===File Contents by line as shown in example below===
 +
 +
====Event Types, Length, Gforces (lines 1 - 7)====
 +
 +
:8,0.5,0.3  sock[\n]  - Shock event size/2 , G-force Value for event mode,  G-force Value for sleep mode
 +
 +
:8  door[\n]                - Door event size/2
 +
 +
:10  panic[\n]            - Panic event size/2
 +
 +
:10  wpanic[\n]        - Wire panic event size/2
 +
 +
:6  alarm[\n]            - Alarm event size/2
 +
 +
:6  shutdown[\n]      - Power off event size/2
 +
 +
:6  start[\n]              - NOT USED
 +
 +
====Event Led ON/OFF (line 8)====
 +
 +
:1111111111[\n]      - Event Led ON/OFF    (1=ON, 0=OFF)
 +
 +
:from left to right, each character
 +
 +
::[0/1] shock event;
 +
 +
::[0/1] door event;
 +
 +
::[0/1] panic event;
 +
 +
::[0/1] wpanic event;
 +
 +
::[0/1] alarm event;
 +
 +
::[0/1] Power off event;
 +
 +
::[0/1] NOT USED;
 +
 +
::[0/1] Scheduled event;
 +
 +
::[0/1] speed event;
 +
 +
::[0/1] super speed event;
 +
 +
====Periodic events (line 9)====
 +
 +
:0,4,0,2,3[\n]            - Scheduled events
 +
 +
:comma separated values, from left to right
 +
 +
::[0/1] disable/enable event;
 +
 +
::[1-120] event size / 2;
 +
 +
::[0/1] 0 = Periodic, 1 = Random  ;
 +
 +
::[10-1440] interval min
 +
 +
::[10-1440] interval max
 +
 +
====SPEED EVENTS (Line 10)====
 +
 +
:0,8,27,5[\n]            - SPEED EVENTS
 +
 +
:comma separated values, from left to right
 +
 +
::[0/1] disable/enable event;
 +
 +
::[1-120] event size / 2;
 +
 +
::[1-120] speed limit(KNOTS);
 +
 +
::[1-120] time limit(seconds);
 +
 +
====SUPER SPEED EVENTS (Line 11)====
 +
 +
:0,9,38,5[\n]            - SUPER SPEED EVENTS
 +
 +
:comma separated values, from left to right
 +
 +
::[0/1] disable/enable event;
 +
 +
::[1-120] event size / 2;
 +
 +
::[1-120] speed limit(KNOTS);
 +
 +
::[1-120] time limit(seconds);
 +
 +
====SLEEP MODE TIME (Line 12)====
 +
 
 +
:1800[\n]                  - SLEEP MODE TIME(see details)
 +
 +
[0-86400] time period(seconds)
 +
 +
====Resolution Mode , Sound ON/OFF , Log ON/OFF (Line 13)====
 +
 +
:3,1,0[\n]                       
 +
 +
:Image capture modes(resolution, frames per second) Values 1 - 9
 +
 +
::1          1600x1200,        8 fps
 +
 +
::2        1200x960,            8 fps
 +
 +
::3      1024x768,            8 fps (DEFALUT)
 +
 +
::6        800x600,              8 fps
 +
 +
::9      640x480,              8 fps
 +
 +
:Sound ON/OFF (1=ON, 0=OFF)
 +
 +
:Log ON/OFF (1=ON, 0=OFF)
 +
 +
====(accelerometer Forward on/off, acc Lateral on/off, acc Vertical on/off) (Line 14)====
 +
 +
:1,1,0                       
 +
 +
::Forward ON/OFF (1=ON, 0=OFF)
 +
 +
::Lateral ON/OFF (1=ON, 0=OFF)
 +
 +
::Vertical ON/OFF (1=ON, 0=OFF)
 +
 +
 +
<br>
 +
 +
==wifi-settings.cfg==
 +
 +
Wifi Configuration settings - For the settings to be read the wpa.cfg file must be on the USB Stick
 +
 +
<pre>
 +
[{
 +
"ap_scan":false,
 +
"priority": 0,
 +
"ssid":"\"bwifi\"",
 +
"key_mgmt":"NONE",
 +
"scan_ssid":"1"
 +
},
 +
{
 +
"priority": 1,
 +
"ssid":"\"bwifi5g\"",
 +
"scan_ssid":"1",
 +
"key_mgmt":"WPA-PSK",
 +
"proto":"WPA RSN",
 +
"pairwise":"CCMP TKIP",
 +
"group":"CCMP TKIP",
 +
"psk":"895a426a1cef3bd98bbc6bb6a7d057b046a3edf2c375ebfc4f41f2230fac3875"
 +
}]
 +
</pre>
 +
 +
<br>
 +
 +
==wpa.cfg==
 +
 +
Updates the wifi configuration
 +
 +
<pre>
 +
 +
ctrl_interface=DIR=/var/run/wpa_supplicant
 +
update_config=1
 +
 +
</pre>
  
 
<br>
 
<br>

Latest revision as of 23:58, 15 February 2019

USB Configuration Files

ASCII files that can be used to change the X2 configuration using a USB Stick.

To have the camera read the USB stick the idrive.cert must be present


adresa.cfg - Sets Base Station Address

192.168.0.10 is default


ip.cfg - Sets IP Address & Netmask of the camera

192.168.0.11 - 192.168.254.254 Standard IP Address Range

255.255.0.0 Standard Network Mask

Note: If the device is run through factory tool the setting will reset to what is set in AC


limit.cfg

Not sure


mac.cfg - changes the MAC Address for the Wifi

00127B4B5F4E


port.cfg - Sets the Port for transfers

9090


reg1.cfg

Not Sure


router.cfg - Sets SSID for Wifi connection (X1 Only)

bwifi is the default

Note: For X2 see wifi-settings.cfg


shock.cfg - Setting of G-force in old X1

#//eveniment pe acceleratie
#WriteRegistru(CTRL_REG1,0x87);
0x20  0x85  0x00
#WriteRegistru(CTRL_REG2,0x88);
0x21  0x08  0x00
#WriteRegistru(CTRL_REG3,0x22);
0x22  0x22  0x00
#WriteRegistru(FF_WU_THS_L, 0x99);
0x34  0x99  0x00
#WriteRegistru(FF_WU_THS_H, 0x29);
0x35  0x29  0x00
#WriteRegistru(FF_WU_DURATION, 0x00);
0x36  0x00  0x00
#ReadRegistru(HP_FILTER_RESET); //dummy read
0x23  0x00  0x01
#WriteRegistru(FF_WU_CFG, 0x4A);
0x30  0x62	0x00
#ReadRegistru(FF_WU_ACK);
0x32  0x00  0x01


size.cfg for X1P

size.cfg File Format

File Contents by line as shown in example below

Event Types, Length, Gforces (lines 1 - 7)

8,0.5,0.3 sock[\n] - Shock event size/2 , G-force Value for event mode, G-force Value for sleep mode
8 door[\n] - Door event size/2
10 panic[\n] - Panic event size/2
10 wpanic[\n] - Wire panic event size/2
6 alarm[\n] - Alarm event size/2
6 shutdown[\n] - Power off event size/2
6 start[\n] - NOT USED

Event Led ON/OFF (line 8)

1111111111[\n] - Event Led ON/OFF (1=ON, 0=OFF)
from left to right, each character
[0/1] shock event;
[0/1] door event;
[0/1] panic event;
[0/1] wpanic event;
[0/1] alarm event;
[0/1] Power off event;
[0/1] NOT USED;
[0/1] Scheduled event;
[0/1] speed event;
[0/1] super speed event;

Periodic events (line 9)

0,4,0,2,3[\n] - Scheduled events
comma separated values, from left to right
[0/1] disable/enable event;
[1-120] event size / 2;
[0/1] 0 = Periodic, 1 = Random ;
[10-1440] interval min
[10-1440] interval max

SPEED EVENTS (Line 10)

0,8,27,5[\n] - SPEED EVENTS
comma separated values, from left to right
[0/1] disable/enable event;
[1-120] event size / 2;
[1-120] speed limit(KNOTS);
[1-120] time limit(seconds);

SUPER SPEED EVENTS (Line 11)

0,9,38,5[\n] - SUPER SPEED EVENTS
comma separated values, from left to right
[0/1] disable/enable event;
[1-120] event size / 2;
[1-120] speed limit(KNOTS);
[1-120] time limit(seconds);

SLEEP MODE TIME (Line 12)

1800[\n] - SLEEP MODE TIME(see details)

[0-86400] time period(seconds)

Resolution Mode , Sound ON/OFF , Log ON/OFF (Line 13)

3,1,0[\n]
Image capture modes(resolution, frames per second) Values 1 - 9
1 1600x1200, 8 fps
2 1200x960, 8 fps
3 1024x768, 8 fps (DEFALUT)
6 800x600, 8 fps
9 640x480, 8 fps
Sound ON/OFF (1=ON, 0=OFF)
Log ON/OFF (1=ON, 0=OFF)

(accelerometer Forward on/off, acc Lateral on/off, acc Vertical on/off) (Line 14)

1,1,0
Forward ON/OFF (1=ON, 0=OFF)
Lateral ON/OFF (1=ON, 0=OFF)
Vertical ON/OFF (1=ON, 0=OFF)



wifi-settings.cfg

Wifi Configuration settings - For the settings to be read the wpa.cfg file must be on the USB Stick 

[{
"ap_scan":false,
"priority": 0,
"ssid":"\"bwifi\"",
"key_mgmt":"NONE",
"scan_ssid":"1"
},
{
"priority": 1,
"ssid":"\"bwifi5g\"",
"scan_ssid":"1",
"key_mgmt":"WPA-PSK",
"proto":"WPA RSN",
"pairwise":"CCMP TKIP",
"group":"CCMP TKIP",
"psk":"895a426a1cef3bd98bbc6bb6a7d057b046a3edf2c375ebfc4f41f2230fac3875"
}]


wpa.cfg

Updates the wifi configuration 


ctrl_interface=DIR=/var/run/wpa_supplicant
update_config=1


Retrieved from "https://admincenter.idriveglobal.com/wiki/index.php?title=USB_Config_Files&oldid=9753"