Difference between revisions of "D8 repair and reprocessing"
Jump to navigation
Jump to search
| Line 30: | Line 30: | ||
<br> | <br> | ||
| + | |||
| + | ====Move GPS, SIM and Cellular Module to replacement board==== | ||
| + | |||
| + | |||
| + | =====GPS Module===== | ||
| + | |||
| + | Remove the two screws securing the module. | ||
| + | |||
| + | Apply Blue Locktite to the mounting studs on the new board | ||
| + | |||
| + | Screw the two screws in attaching the module (do not over torque) | ||
==D8 Reprocessing== | ==D8 Reprocessing== | ||
Revision as of 17:52, 16 January 2019
D8 Repair
Verify the reported issue.
Check for physical damage to the connectors or case
Motherboard Replacement
Open the DVR case
- Remove the SSD Sled
- Remove the two top screws on the front of the D8
- Remove the 4 screws on the back panel
- Slide the top cover back and slowly lift up
- Disconnect the 3 cables to the Mother Board
- Lift off the Top cover and set aside
Remove Back Panel
- Disconnect the cables from the Mother Board, GPS and Cellular Modules
Move GPS, SIM and Cellular Module to replacement board
GPS Module
Remove the two screws securing the module.
Apply Blue Locktite to the mounting studs on the new board
Screw the two screws in attaching the module (do not over torque)
D8 Reprocessing
Configure for customer