Difference between revisions of "D8 repair and reprocessing"
Jump to navigation
Jump to search
| Line 13: | Line 13: | ||
===Motherboard Replacement=== | ===Motherboard Replacement=== | ||
| − | Open the DVR case | + | ====Open the DVR case==== |
::*Remove the SSD Sled | ::*Remove the SSD Sled | ||
| Line 29: | Line 29: | ||
<br> | <br> | ||
| − | Remove Back Panel | + | ====Remove Back Panel==== |
::*Disconnect the cables from the Mother Board, GPS and Cellular Modules | ::*Disconnect the cables from the Mother Board, GPS and Cellular Modules | ||
<br> | <br> | ||
Revision as of 17:47, 16 January 2019
D8 Repair and Reprocessing
D8 Repair
Verify the reported issue.
Check for physical damage to the connectors or case
Motherboard Replacement
Open the DVR case
- Remove the SSD Sled
- Remove the two top screws on the front of the D8
- Remove the 4 screws on the back panel
- Slide the top cover back and slowly lift up
- Disconnect the 3 cables to the Mother Board
- Lift off the Top cover and set aside
Remove Back Panel
- Disconnect the cables from the Mother Board, GPS and Cellular Modules