Idrive X2 GSM Processes

Idrive X2 GSM Processes & Procedures

This area is to collect all of the information about sales and processing GSM modules

Sales and Support

Quote Items

we have 6 “Agreement” items which can be selected on quotes and based on these cameras will be set accordingly:

• IDRLT3G-120S,

• IDRLT3G-60S,

• IDRLT3G-30S - Monthly cost for Live GPS Tracking services at 2 min/1min/30seconds intervals Live Looking + Live GPS Tracking (multiple GPS positions per transmission based on an algorithm that detects the curves)

• IDRVT3G-120S, - For intermodals, Live Looking + Basic Live GPS Tracking (2 minutes basic tracking), this will consume less data since transmits only one positon at 2 minutes. Once we will release the new FW using web socket there is no need for a sorter transition period since the live look-ins will be pushed, not fetched.

• IDRVT3G-60S (this will be eliminated once web socket will be used), IDRVT3G-30S (this will be eliminated) - Monthly cost for Live GPS Tracking services at 2 min intervals, Live Looking + Basic Live GPS Tracking (one GPS position per transmission)

Pod Systems (SIM Card Provider)

Go to: https://www.freedom2manage.com/user/login

Username: sean@idriveglobal.com Password: Idr805sb

Go to the “Manage SIM Cards” tab at the top

Enter SIM number into the Quick Filter to find and click enter.

Once the SIM comes up select the check box to the left and under the Actions tab below select either “Activate SIMS” or “Suspend SIMs”.

If you have activated a SIM it will ask you to “Please select a bundle” in the drop down box. It is standard to select the “UKJ 20MB@4.10 OU 0.60 USD” after you have made your selection press “Send”.

You will then be prompted to type in “ACTIVATE” in all caps and then press the red “Activate” button. Once accepted a box should pop up that says Done!

Press the “Done” button and it will bring you back to the SIM Manager page.

The SIM you have just activated will already be up and displayed and should now be Green and Active. You will now need to select the “Control Tab”. After entering the “Control Tab” you will select “Assign Name”. You will need to assign a name (this is preferably the name of the company and vehicle number). If you do not have the vehicle number just add the Company name and the last 4 of the Cam #.

Select the “Set Name for SIM card” and you are all set!

Notes

Regarding of data transmission interval, all their cameras are set to 120 seconds tracking. The info in that AC tab is retrieved from an old database structure which is not used anymore and not up to date. We will have Stefan to correct that interface soon and correct also the link between the quote/shipping and cameras settings.

Technical Items

Quicktel Firmware Update Process

This needed to be done in ~December 2015. A recall was done to pull in the modules that needed this and there should not be anymore in the field. This process is documented here because Mark had some of the returns to process.

3G Module Update Procedure

- Connect the 3G module to PC USB using the custom cable (Quectel_USB_Drivers needs to be already installed).

- Open a device manager window and verify the Quectel USB DM Port (COMx) number.

- Run the QFlash_V3.4.exe application

-Select the COM Port number that corresponds to the Quectel USB DM Port (COMx) displayed in Device Manager window.

-Hit the Load FW Files button and browse&select the UC20GQAR03A07M1024_BETA1023 folder

- Hit the Start button

When update is finished the QFlash application will display “ Restore nv data to module successfully” message.

Verify update success using a Com Port terminal application (ex. Putty)

opening Quectel USB AT Port(COMx) with baudrate 115200.

In terminal window type ATI and hit enter, the module response should be:

Quectel UC20 Revision: UC20GQAR03A07M1024_BETA1023 OK