BNSF D8 device and alert management

BNSF D8 Device and Alerts Management

Base Station

Control Center is required to enter vehicles and contacts for a location so that the D8 device can be associated with it. LTI/Global Center needs this information to exist so the alerts can be set up and it cannot be created in Global Center at this time.

Many of the BNSF locations with D8 alert monitoring do not have a physical base station associated with them and he existing BNSF locations with base stations have connections with global center shut down. There are some BNSF locations that are collocated with other companies that have base stations but they are other companies.

We need to have a virtual base station(s) so the data entry can be done.

Virtual Base Station

This is a real base station located somewhere in Idrive. SB?

We will create the SIG site and use that product code to install Control Center on a computer in SB or RO (maybe both which will require another Validation code from another BNSF location)

Virtual Base Station Config Steps

• Log into Admin Center and navigate to the customer (BNSF Railway)

• Click 'Add Location & Product Key

• Use product key to install control center on and Idrive computer.

Create Company -(if not BNSF Railway)

Create Location (if it does not exist)

Assign Devices -

Enter Vehicles - (can vehicles be transffered to different locations?

Enter Contacts -

LTI Alerts Management

The real LTI site is not ready yet so we will use the demo site at the moment

Log into LTI

• Log into Admin Center and navigate to the customer (BNSF Railway)

• Click Login as Client (this is pointed to tracking.idriveglobal.com/gps which will become the real site. At the moment it does not have the full functionality so we will use tracking-demo.idriveglobal.com for the moment)