D8 Initial Configuration and Setup

D8 Configuration and Setup

Assemble System

Place default configuration (Parameters file on the SSD

Install SSD

put Batteries in the remote (batteries not included w/D8)

Plug in the D8 Power cable (NOT a D4 Cable!)

Plug in the 16 wire Harness and attach the StarTech USB device

Install the SIM card (what SIM, how to document etc)

Import Configuration "Parameters" File

Press "login" button on the remote

enter password 666666 (admin)press "OK"

navigate using left, right, up, down buttons to "Tools > Parameters"

Click "Import Parameters" (Yes)

Parameters file differences

Comparison of Al's initial config and the default config

<KeyPara

• MD5 different

<BaseSetup

• TimeZone (Al = 7 Default = 20)

• timingtime (Al = "00:00:00" Default = "06:30:00")

• OprTimeOut (Al = 120 Default = 30)

<TerminalSetup

• device_num (Al = 225001 Default = 10000)

• Phonenumber (Al = Blank Default = 1000)

• company_name (Al = "idr" Default = Blank)

• Authentication (Al = "225001" Default = 10000)

<RecordSet

• CameraType (Al = "0" Default = 1)

<RecordSetMainChNoSet

• Resolution (Al = "2" Default = 0)

<RecordSetMirrorChNoSet

• isRec (Al = "1" Default = 0)

<SystemPowerSet

• PowerOnTime (Al = "00:00:00" Default = 06:00:00)

• PowerOffTime (Al = "00:00:00" Default = 22:00:00)

<MonitorSet

• showNum (Al = 9 Default = 8)

<NetWorkSet

• IpAddr (Al = 10.7.7.14 Default = 192.168.1.80)

• GateWay (Al = 10.7.7.1 Default 192.168.2)

• DNS1 (Al = 65.32.5.111 Default 192.168.1.2)

• DNS2 (Al = 65.32.5.111 Default 192.168.1.2)

AL:

<CenterNetwork __id="0" Enable="1" Type="0" CenterIP="72.186.112.19" ContrlPort="6608" DomainName="" />

<CenterNetwork __id="1" Enable="1" Type="0" CenterIP="10.7.7.2" ContrlPort="6608" DomainName="" />

<CenterNetwork __id="2" Enable="1" Type="0" CenterIP="0.0.0.0" ContrlPort="0" DomainName="" />

<CenterNetwork __id="3" Enable="1" Type="0" CenterIP="0.0.0.0" ContrlPort="0" DomainName="" />

<CenterNetwork __id="4" Enable="1" Type="0" CenterIP="0.0.0.0" ContrlPort="0" DomainName="" />

<CenterNetwork __id="5" Enable="1" Type="0" CenterIP="0.0.0.0" ContrlPort="0" DomainName="" />

<CenterNetwork __id="6" Enable="0" Type="0" CenterIP="0.0.0.0" ContrlPort="0" DomainName="" />

<CenterNetwork __id="7" Enable="1" Type="0" CenterIP="0.0.0.0" ContrlPort="21" DomainName="" />

Default:

<CenterNetwork __id="0" Enable="1" Type="0" CenterIP="115.159.59.201" ContrlPort="6608" DomainName="" />

<CenterNetwork __id="1" Enable="1" Type="0" CenterIP="192.168.1.10" ContrlPort="6608" DomainName="" />

<CenterNetwork __id="2" Enable="1" Type="0" CenterIP="0.0.0.0" ContrlPort="0" DomainName="" />

<CenterNetwork __id="3" Enable="1" Type="0" CenterIP="0.0.0.0" ContrlPort="0" DomainName="" />

<CenterNetwork __id="4" Enable="1" Type="0" CenterIP="0.0.0.0" ContrlPort="0" DomainName="" />

<CenterNetwork __id="5" Enable="1" Type="0" CenterIP="0.0.0.0" ContrlPort="0" DomainName="" />

<CenterNetwork __id="6" Enable="0" Type="0" CenterIP="0.0.0.0" ContrlPort="0" DomainName="" />

<CenterNetwork __id="7" Enable="1" Type="0" CenterIP="113.108.120.47" ContrlPort="21" DomainName="" /

<DialUpSet

• APN (Al = data641003 Default = 3gnet)

• UserName (Al = Blank Default = card)

• UserPwd (Al = Blank Default = card)

• SimICCID (Al & Default = "89860115851042424258") Why are these the same?

• SmsCenter (Al = Blank Default = +8613010888500)

<WifiSet

• Encrypt (Al = 2 Default = 3)

• SSID (Al = Blank Default = 888

• Pwd (Al = Blank Default = 88888888)

• IpAddr (Al = 255.255.255.255 Default = 192.168.2.10)

• SubNet (Al = 255.255.255.255 Default = 255.255.255.0)

• GateWay (Al = 255.255.255.255 Default = 192.168.2.1)

• Purpose (Al = 16 Default =0)

Things we may need/want to set

<SystemInfo Product_List_info , Manufacturer

<SecuritySet

• AdminPassword (Default 666666)

• UserPassword (Default 000000)

<Front0sdSet

• <ChlName __id="0" ChlName="CH1" (Change "CH1" to "Crane front Left" etc?)