@@ Line 1: / Line 1: @@
-==Mark Notes==
-To Do: set time and timezone
-set secure password / change user name?
-<br\><br\>
-==Initial Configuration Setup==
-===Set up RB2011LS-IN Router for initial configuration===
-Connect to power
-Connect cat 5 cable from Port ETH6 to the NIC for Idrive wireless
-*Network connection setting on the computer:
-::-192.168.88.10
-::-255.255.255.0
-<br\><br\>
-===Connect using Winbox===
-[[File:rb2011__initial_login.jpg|500px|thumb]]
-Download and install Winbox [http://download2.mikrotik.com/winbox.exe Configuration tool for RouterOS].
-Run Winbox.exe or double click the icon on the desktop
-[[File:winbox_icon.jpg|100px]]
-*Enter the Default "Connect To" IP Address is 192.168.88.1
-*Login: admin
-*password: blank
-*Click "Connect"
-Document the MAC address for entry into AdminCenter
-Click on "Connect"
-<br\><br\><br\><br\>
-===Initial Log in===
-[[File:Mikrotik2.png|500px|thumb]]
-A pop-up window will appear and choose "Remove Configuration" otherwise the router will create a default configuration.
-<br\><br\><br\><br\><br\><br\><br\><br\><br\><br\><br\><br\><br\><br\><br\><br\><br\><br\><br\><br\>
-==Setup using Restore configuration file (Recommended)==
-===Load Idrive Standard configuration===
-[[File:rb2011_restore_config.jpg|600px|thumb]]
-For simplicity and consistency it is better to set the routers configuration using the RouterOS backup/restore function. This "restores" the standard idrive configuration from a .backup file. This will leave only a few custom settings that are specific to the customer location(s).
-*Download the most current .backup file from [https://admincenter.idrive.pro/wiki/index.php?title=Idrive_Downloads Admin Center]
-*Unzip the file to the Desktop on your computer
-*In WinBox select “Files” from the left menu to open the Files List window.
-*Use the mouse to drag and drop the configuration file from the Desktop into the Files List (uploads the file to the Router)
-*Highlight the config file and click on "Restore"
-<br\><br\><br\><br\><br\><br\><br\><br\><br\><br\><br\><br\><br\><br\>
-===Set Customer/Location Specific Settings===
-====Static Internet IP Address====
-[[File:rb2011_static_ip_setting.jpg|600px|thumb]]
-Set the Base Station Static IP address and Gateway (must obtain the information from the customers ISP)
-*In WinBox select “IP” from the left menu and from the pull-down menu select "Addresses" to open the Address List window.
-*Double click on the line that has the Interface "ether1" to edit the Address properties
-[[File:rb2011_ether1_address.jpg|200px|]]
-After this only thing that needs to be changed is the IP addresses of the Base Station equipment (RB2011LS-IN), port “ether1”, for internet connection,
-using Winbox  under “IP” section > “Addressed” and gateway under  “IP” section > “Routes” (0.0.0.0/0 to x.x.x.x).
-<br\><br\><br\><br\><br\><br\><br\><br\>
-====Static Routes====
-[[File:rb2011_static_route_setting.jpg|600px|thumb]]
-*In WinBox select “IP” from the left menu and from the pull-down menu select "Routing" to open the Route List window.
-*Double click on the line that has the Interface "ether1" to edit the Address properties
-[[File:rb2011_ether1_address.jpg|200px|]]
-<br\><br\><br\><br\><br\><br\>
-====Timezone====
-<br\><br\>
-====What Else?====
-<br\><br\>
-==Setup using manual method==
-===create a static IP for your internet connection===
-First step is to create a static IP for your internet connection.
-[[File:Mikrotik3.png|500px|center]]
-Select "Addresses" from "IP" and click the plus sign.
-[[File:Mikrotik4.png|500px|center]]
-We used IP 10.3.0.80 which is a local IP from the main router IP Pool and
-we have forwarded the 1723 port.
-[[File:Mikrotik5.png|500px|center]]
-Route IP for internet access.
-[[File:Mikrotik6.png|500px|center]]
-Add IP 0.0.0.0/0 in "Dst. Address:" box. In "Gateway" box add your gateway.
-[[File:Mikrotik7.png|500px|center]]
-Select "Bridge" from the left menu and add new bridge.
-[[File:Mikrotik8.png|500px|center]]
-From the same interface select "Ports" tab and add interfaces ether1 and ether2 to "bridge_internet"
-[[File:Mikrotik9.png|500px|center]]
-[[File:Mikrotik10.png|500px|center]]
-Now repeat the step above and create a new bridge.
-Make sure the "ARP" is disabled!
-[[File:Mikrotik11.png|500px|center]]
-From the same interface click on "STP" tab, check "Protocol mode: rstp" and apply.
-[[File:Mikrotik12.png|500px|center]]
-Select "Ports" tab from the "Bridge" interface and add new bridge port.
-Select "ether3" and "bridge_tunnel" from the drop-down list.
-[[File:Mikrotik13.png|500px|center]]
-Create a third bridge, "bridge_local" with "ARP" enabled and add MAC Address: 00:00:5E:80:01:01.
-Select "STP" tab, check "Protocol mode: rstp" and apply.
-[[File:Mikrotik14.png|500px|center]]
-[[File:Mikrotik15.png|500px|center]]
-Return to the IP->Address List interface and add "192.168.0.2/16" to "bridge_local".
-[[File:Mikrotik16.png|500px|center]]
-Select "Profiles" tab from PPP interface add new profile.
-From the "General" tab fill the new profile name and select "bridge_tunnel" from drop-down list.
-Select "Protocols" tab and check "yes" from "Use Encryption".
-[[File:Mikrotik17.png|500px|center]]
-[[File:Mikrotik18.png|500px|center]]
-From PPP interface select "Secrets" tab and create new secret.
-Fill with the name and password and select the profile you have created above.
-[[File:Mikrotik19.png|500px|center]]
-Select "SSTP Server" from PPP->Interface, check 1723 port, select "default-encryption" and uncheck "pap" and "chap" authentication.
-[[File:Mikrotik20.png|500px|center]]
-If the VPN client is configured the connection will start automatically. If the VPN client is not configured, check [[Configure VPN Client]].
-To check active connection select PPP->Active Connection or Bridge->Ports.
-[[File:Mikrotik22.png|500px|center]]
-Add the rest of interfaces to "bridge_local" in order to use the router in network.
-[[File:Mikrotik21.png|500px|center]]

Difference between revisions of "Configure VPN Server"

Latest revision as of 18:16, 7 November 2014

Navigation menu

Search