Difference between revisions of "Configure VPN Server"

@@ Line 1: / Line 1: @@
-Before start configure VPN server download the [http://download2.mikrotik.com/winbox.exe Configuration tool for RouterOS].
-Run Winbox.exe and wait 5-10 sec. until the IP and MAC adress will apear.
-[[File:Mikrotik1.png|center]]
-A pop-up window will apear and choose "Remove Configuration" otherwise the router will create a default configuration.
-[[File:Mikrotik2.png|center]]
-First step is to create a static IP for your internet connection.
-[[File:Mikrotik3.png|center]]
-Select "Addresses" from "IP" and click the plus sign.
-[[File:Mikrotik4.png|center]]
-We used IP 10.3.0.80 which is a local IP from the main router IP Pool and
-we have forwarded the 1723 port.
-[[File:Mikrotik5.png|center]]
-Route IP for internet access.
-[[File:Mikrotik6.png|center]]
-Add IP 0.0.0.0/0 in "Dst. Address:" box. In "Gateway" box add your ISP gateway.
-[[File:Mikrotik7.png|1024px|center]]
-Select "Bridge" from the left menu and add new bridge.
-[[File:Mikrotik8.png|1024px|center]]
-From the same interface select "Ports" tab and add interfaces ether1 and ether2 to "bridge_internet"
-[[File:Mikrotik9.png|1024px|center]]
-[[File:Mikrotik10.png|1024px|center]]
-Now repeat the step above and create a new bridge.
-Make sure the "ARP" is disabled!
-[[File:Mikrotik11.png|1024px|center]]
-From the same interface click on "STP" tab, check "rstp" and apply.
-[[File:Mikrotik12.png|1024px|center]]
-Select "Ports" from the "Bridge" interface and add "ether3" to the "bridge_tunnel"
-[[File:Mikrotik13.png|1024px|center]]

Difference between revisions of "Configure VPN Server"

Latest revision as of 18:16, 7 November 2014

Navigation menu

Search