Difference between revisions of "AI Pro 7 - Camera Assembly"
Jump to navigation
Jump to search
| (3 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
=Pro 7 RMA breakdown= | =Pro 7 RMA breakdown= | ||
| − | + | <br> | |
| − | + | ===Disassembly=== | |
| − | + | * Remove the 4 screws from backing of the Pro 7 | |
| + | |||
| + | *Disconnect connection between speaker, cellular, and GPS. | ||
(Replace parts if damaged or inop) | (Replace parts if damaged or inop) | ||
| − | + | [[File:pro7cablesdisconnect.jpg|600px|]] | |
| + | |||
| + | *To remove the GPS puck, remove screw holding down the puck to the Motherboard. | ||
| + | |||
| + | *Slide the GPS Puck slowly in the opposite direction of its connection point. | ||
| + | |||
| + | [[File:pro7gpspuckremoval.jpg|600px|]] [[File:pro7gpspuckremoval2.jpg|600px|]] | ||
| + | |||
| + | *Remove display unit by gently pulling it from its connection point on the motherboard. It should slide off with ease. | ||
| − | + | [[File:pro7displayremoval.jpg|600px|]] | |
| + | |||
| + | *To remove the lens modules, just gently lift and it will disconnect from the motherboard. (GPS Puck and display mod. Should be removed first before lens replacement). | ||
| + | |||
| + | [[File:pro7gpslensmodremoval.jpg|600px|]] | ||
| + | |||
| + | <br> | ||
| + | |||
| + | ===SIM Replacement=== | ||
| + | |||
| + | [[File:pro7simlocation1.jpg|600px|]] | ||
| − | + | [[File:pro7simlocation2.jpg|600px|]] | |
| − | + | *To replace the SIM, just look behind the GPS Puck. | |
| − | + | <br> | |
Latest revision as of 17:54, 22 November 2024
Pro 7 RMA breakdown
Disassembly
- Remove the 4 screws from backing of the Pro 7
- Disconnect connection between speaker, cellular, and GPS.
(Replace parts if damaged or inop)
- To remove the GPS puck, remove screw holding down the puck to the Motherboard.
- Slide the GPS Puck slowly in the opposite direction of its connection point.
File:Pro7gpspuckremoval.jpg File:Pro7gpspuckremoval2.jpg
- Remove display unit by gently pulling it from its connection point on the motherboard. It should slide off with ease.
- To remove the lens modules, just gently lift and it will disconnect from the motherboard. (GPS Puck and display mod. Should be removed first before lens replacement).
File:Pro7gpslensmodremoval.jpg
SIM Replacement
- To replace the SIM, just look behind the GPS Puck.