Difference between revisions of "Manufacturing:AI Programmer Setup Wiring"

From Idrive
Jump to navigation Jump to search
(Created page with "=AI PROGRAMMER SETUP(WIRING)= *Connect Programmer to a 12 V Power Supplier – Power cable connects to the J2 connector on Programmer File:11.png *Connect Programmer t...")
 
(No difference)

Latest revision as of 10:16, 25 March 2020

AI PROGRAMMER SETUP(WIRING)

  • Connect Programmer to a 12 V Power Supplier – Power cable connects to the J2 connector on Programmer

11.png


  • Connect Programmer to PC – the cable connects to the J5 connector on Programmer and to the USB slot from USB Hub

22.png


  • Connect Serial console cable to Programmer – it connects to the J4 connector on Programmer

33.png


  • Insert Main Board into the Programmer holding fixture (secure its position with the plexiglass catcher)

44.png


  • Connect Programmer to X3 (AI) Main Board – Power Signal cable connects to the J3 connector on Programmer and to the J1 on Main Board

55.png


  • Connect X3 (AI) Main Board to PC – the cable connects to the Micro USB J9 connector on Main Board and to the USB slot from USB Hub.

66.png


USB cables will be connected to PC through a USB Hub (external power supply)

77.jpg

Retrieved from "https://admincenter.idriveglobal.com/wiki/index.php?title=Manufacturing:AI_Programmer_Setup_Wiring&oldid=11152"