Firmware 9.9 Specs - Revision history

Fpasol at 07:49, 25 September 2013

2013-09-25T07:49:58Z

Cornel: /* OmniVision settings UXGA */

2013-01-16T13:12:45Z

OmniVision settings UXGA

Show changes

Cornel: /* OmniVision settings UXGA */

2013-01-16T13:01:31Z

OmniVision settings UXGA

Cornel: /* OmniVision settings UXGA */

2013-01-16T13:01:06Z

OmniVision settings UXGA

Cornel: /* OmniVision settings UXGA */

2013-01-16T12:59:48Z

OmniVision settings UXGA

Cornel: /* Original settings mode 2 */

2013-01-16T12:58:27Z

Original settings mode 2

Cornel: /* OmniVision 3Mpx image sensor configurable settings */

2013-01-16T12:47:08Z

OmniVision 3Mpx image sensor configurable settings

Cornel: /* OmniVision 2Mpx image sensor resolution reduction */

2013-01-16T12:46:10Z

OmniVision 2Mpx image sensor resolution reduction

Fpasol: /* Bank 0 */

2013-01-10T09:00:53Z

Bank 0

Fpasol: /* Bank 1 */

2013-01-04T14:01:15Z

Bank 1

← Older revision		Revision as of 07:49, 25 September 2013
Line 790:		Line 790:

	===OmniVision 3Mpx image sensor configurable settings===		===OmniVision 3Mpx image sensor configurable settings===
		+
		+
		+
		+	== Firmware 9.9 Notes ==
		+
		+	==Summary==
		+
		+	Firmware 9.9(early access - beta)
		+
		+	==Bug fixes==
		+
		+	Phantom frame;
		+
		+	Event video jumping in future/past;
		+
		+	==New Features==
		+
		+
		+	===Longer Events===
		+
		+	The amount of time to record for some type of events(like panic event) can be now increased up to 1 min.
		+
		+	===Ignition Log===
		+
		+	The ignition log combined with GPS tracks will provide a better image of the journey routes and parking time of the vehicle;
		+	As a supplement on the Control Center Application new GPS Tracking section was completely redesigned to offer a better user interface experience and to support all the new firmware features.
		+
		+	===Speed Events and Super Speed Events===
		+
		+	A new set of events type based on speed data provided by the GPS are now available. Speed events are triggered when defined speed limits are
		+	exceeded for a period of time. Speed events will be triggered when speed data sent by the GPS exceeds the defined value, for a period of time.
		+	Same thing for super speed events but speed limit must be higher then the limit defined for speed event.
		+	The device will not trigger another speed event or super speed event until speed data send by the GPS will be lower then the value defined for SPEED EVENT.
		+	All these values can be modified using size.cfg file which has a new format(see below details).
		+
		+	===Sleep Mode===
		+
		+	A new device operation mode that will keep events triggers and GPS module active while Ignition is turned off.
		+	Now the device can trigger events(like panic or shock) while the vehicle is packed, increasing the vehicles security. The fact that GPS module is still active while ignition is turned off will provide valid GPS coordinates right after the Ignition is turned ON, because the GPS module synchronization time will be null. The Device will enter into sleep mode after transfer mode ends(WIFI or USB).
		+	The sleep mode time period can be modified using size.cfg file(see below details).
		+	If an event is triggered while in sleep mode the device will act as if it is in event mode - will enter back in sleep mode when event is finished.
		+	The device will enter in event mode, without restart, if Ignition ON is received while it is in sleep mode.
		+
		+
		+	==size.cfg File Format==
		+
		+	===File Contents===
		+
		+	8 sock[\n] - Shock event size/2 (See Event Length Detail)
		+
		+	8 door[\n] - Door event size/2 (See Event Length Detail)
		+
		+	10 panic[\n] - Panic event size/2 (See Event Length Detail)
		+
		+	10 wpanic[\n] - Wire panic event size/2 (See Event Length Detail)
		+
		+	6 alarm[\n] - Alarm event size/2 (See Event Length Detail)
		+
		+	6 shutdown[\n] - Power off event size/2 (See Event Length Detail)
		+
		+	6 start[\n] - NOT USED
		+
		+	1111111111[\n] - Event Led ON/OFF(see Event LED Details)
		+
		+	0,4,0,2,3[\n] - PLEASE DO NOT CHANGE
		+
		+	1,8,27,5[\n] - SPEED EVENTS(see Speed Event Details)
		+
		+	1,9,38,5[\n] - SUPER SPEED EVENTS(see Super Speed Event Details)
		+
		+	1800[\n] - SLEEP MODE TIME(see Sleep Mode Details)
		+
		+	===Event Length Detail===
		+
		+	Length for Event Type where the Length value sets the amount of time Before and After the event trigger. IE, a value of 8 will record 16 seconds of video.
		+
		+	===Event Led ON/OFF Details===
		+	from left to right. 1=ON 0=OFF
		+
		+	[0/1] shock event;
		+
		+	[0/1] door event;
		+
		+	[0/1] panic event;
		+
		+	[0/1] wpanic event;
		+
		+	[0/1] alarm event;
		+
		+	[0/1] Power off event;
		+
		+	[0/1] NOT USED;
		+
		+	[0/1] NOT USED;
		+
		+	[0/1] speed event;
		+
		+	[0/1] super speed event;
		+
		+	===Speed and Super speed lines===
		+
		+	comma separated values, from left to right
		+
		+	[0/1] disable/enable event;
		+
		+	[1-120] event size / 2;
		+
		+	[1-120] speed limit(KNOTS); (1 Knot = 1.15077945 MPH = 1.852 KPH)
		+
		+	[1-120] time limit(seconds);
		+
		+	===Sleep mode time===
		+	[0-86400] time period(seconds)

@@ Line 452: / Line 452: @@
 xff = 0x01
 x12 = 0x80
 xff = 0x00 //Bank 0
 x2c = 0xff
 x2e = 0xdf

@@ Line 451: / Line 451: @@
 ====OmniVision settings UXGA ====
-xff, 0x01
+xff = 0x01
-x12, 0x80
+x12 = 0x80
-xff, 0x00 //Bank 0
+xff = 0x00 //Bank 0
-x2c, 0xff
+x2c = 0xff
-x2e, 0xdf
+x2e = 0xdf
 		 {0xff, 0x01},  //Bank 1

@@ Line 451: / Line 451: @@
 ====OmniVision settings UXGA ====
-                 {0xff, 0x01},
+xff, 0x01
-		 {0x12, 0x80},
+x12, 0x80
-		 {0xff, 0x00}, //Bank 0
+xff, 0x00 //Bank 0
-		 {0x2c, 0xff},
+x2c, 0xff
-		 {0x2e, 0xdf},
+x2e, 0xdf
 		 {0xff, 0x01},  //Bank 1

← Older revision		Revision as of 12:58, 16 January 2013
Line 449:		Line 449:


−	====~~Original~~ settings ~~mode 2~~====	+	====OmniVision settings UXGA ====
		+
		+	{0xff, 0x01},
		+	{0x12, 0x80},
		+
		+	{0xff, 0x00}, //Bank 0
		+	{0x2c, 0xff},
		+	{0x2e, 0xdf},
		+
		+	{0xff, 0x01}, //Bank 1
		+	{0x3c, 0x32},
		+	{0x11, 0x01},
		+	{0x09, 0x02},
		+	{0x04, 0x28},
		+	{0x13, 0xe5},
		+	{0x14, 0x48},
		+	{0x2c, 0x0c},
		+	{0x33, 0x78},
		+	{0x3a, 0x33},
		+	{0x3b, 0xfB},
		+	{0x3e, 0x00},
		+	{0x43, 0x11},
		+	{0x16, 0x10},
		+	{0x39, 0x82},
		+	{0x35, 0x88},
		+	{0x22, 0x0a},
		+	{0x37, 0x40},
		+	{0x23, 0x00},
		+	{0x34, 0xa0},
		+	{0x36, 0x1a},
		+	{0x06, 0x02},
		+	{0x07, 0xc0},
		+	{0x0d, 0xb7},
		+	{0x0e, 0x01},
		+	{0x4c, 0x00},
		+	{0x48, 0x00},
		+	{0x5B, 0x00},
		+	{0x42, 0x83},
		+	{0x4a, 0x81},
		+	{0x21, 0x99},
		+	{0x24, 0x30}, // {0x24, 0x40}, original ov-settings
		+	{0x25, 0x2a}, // {0x25, 0x38}, original ov-settings
		+	{0x26, 0x82},
		+	{0x5c, 0x00},
		+	{0x63, 0x00},
		+	{0x46, 0x00},
		+	{0x0c, 0x38},
		+	{0x61, 0x70},
		+	{0x62, 0x80},
		+	{0x7c, 0x05},
		+	{0x20, 0x80},
		+	{0x28, 0x30},
		+	{0x6c, 0x00},
		+	{0x6d, 0x80},
		+	{0x6e, 0x00},
		+	{0x70, 0x02},
		+	{0x71, 0x94},
		+	{0x73, 0xc1},
		+	{0x3d, 0x34},
		+	{0x5a, 0x57},
		+	{0x4f, 0xbb},
		+	{0x50, 0x9c},
		+
		+	{0xff, 0x00}, //Bank 0
		+	{0xe5, 0x7f},
		+	{0xf9, 0xc0},
		+	{0x41, 0x24},
		+	{0xe0, 0x14},
		+	{0x76, 0xff},
		+	{0x33, 0xa0},
		+	{0x42, 0x20},
		+	{0x43, 0x18},
		+	{0x4c, 0x00},
		+	{0x87, 0xd0},
		+	{0x88, 0x3f},
		+	{0xd7, 0x03},
		+	{0xd9, 0x10},
		+	{0xd3, 0x82},
		+	{0xc8, 0x08},
		+	{0xc9, 0x80},
		+	{0x7c, 0x00},
		+	{0x7d, 0x00},
		+	{0x7c, 0x03},
		+	{0x7d, 0x48},
		+	{0x7d, 0x48},
		+	{0x7c, 0x08},
		+	{0x7d, 0x20},
		+	{0x7d, 0x10},
		+	{0x7d, 0x0e},
		+	{0x90, 0x00},
		+	{0x91, 0x0e},
		+	{0x91, 0x1a},
		+	{0x91, 0x31},
		+	{0x91, 0x5a},
		+	{0x91, 0x69},
		+	{0x91, 0x75},
		+	{0x91, 0x7e},
		+	{0x91, 0x88},
		+	{0x91, 0x8f},
		+	{0x91, 0x96},
		+	{0x91, 0xa3},
		+	{0x91, 0xaf},
		+	{0x91, 0xc4},
		+	{0x91, 0xd7},
		+	{0x91, 0xe8},
		+	{0x91, 0x20},
		+	{0x92, 0x00},
		+	{0x93, 0x06},
		+	{0x93, 0xe3},
		+	{0x93, 0x05},
		+	{0x93, 0x05},
		+	{0x93, 0x00},
		+	{0x93, 0x04},
		+	{0x93, 0x00},
		+	{0x93, 0x00},
		+	{0x93, 0x00},
		+	{0x93, 0x00},
		+	{0x93, 0x00},
		+	{0x93, 0x00},
		+	{0x93, 0x00},
		+	{0x96, 0x00},
		+	{0x97, 0x08},
		+	{0x97, 0x19},
		+	{0x97, 0x02},
		+	{0x97, 0x0c},
		+	{0x97, 0x24},
		+	{0x97, 0x30},
		+	{0x97, 0x28},
		+	{0x97, 0x26},
		+	{0x97, 0x02},
		+	{0x97, 0x98},
		+	{0x97, 0x80},
		+	{0x97, 0x00},
		+	{0x97, 0x00},
		+	{0xc3, 0xed},
		+	{0xc4, 0x9a},
		+	{0xa4, 0x00},
		+	{0xa8, 0x00},
		+	{0xc5, 0x11},
		+	{0xc6, 0x51},
		+	{0xbf, 0x80},
		+	{0xc7, 0x10},
		+	{0xb6, 0x66},
		+	{0xb8, 0xA5},
		+	{0xb7, 0x64},
		+	{0xb9, 0x7C},
		+	{0xb3, 0xaf},
		+	{0xb4, 0x97},
		+	{0xb5, 0xFF},
		+	{0xb0, 0xC5},
		+
		+	{0xb1, 0x94},
		+	{0xb2, 0x0f},
		+	{0xc4, 0x5c},
		+	{0xc0, 0xc8},
		+	{0xc1, 0x96},
		+	{0x86, 0x1d},
		+	{0x50, 0x00},
		+	{0x51, 0x90},
		+	{0x52, 0x2c},
		+	{0x53, 0x00},
		+	{0x54, 0x00},
		+	{0x55, 0x88},
		+	{0x57, 0x00},
		+	{0x5a, 0x90},
		+	{0x5b, 0x2c},
		+	{0x5c, 0x05},
		+	{0xc3, 0xed},
		+	{0x7f, 0x00},
		+	{0xda, 0x00},
		+	{0xe5, 0x1f},
		+	{0xe1, 0x67},
		+	{0xe0, 0x00},
		+	{0xdd, 0x7f},
		+	{0x05, 0x00},

	===OmniVision 3Mpx image sensor configurable settings===		===OmniVision 3Mpx image sensor configurable settings===

← Older revision		Revision as of 12:47, 16 January 2013
Line 447:		Line 447:

	0xED = 0x1F, DVP tri-state when power down		0xED = 0x1F, DVP tri-state when power down
		+
		+
		+	====Original settings mode 2====

	===OmniVision 3Mpx image sensor configurable settings===		===OmniVision 3Mpx image sensor configurable settings===

@@ Line 194: / Line 194: @@
 ===OmniVision 2Mpx image sensor resolution reduction===
-Current settings mode 2
+====Original settings mode 2====
   Bank 0 select  - 0xFF = 0x00
@@ Line 225: / Line 225: @@
   ==Default settings==
 === Bank 1 ===

@@ Line 385: / Line 385: @@
 xc3 = 0xED module enable,
-xA8 = 0x00, simple AWB option
+xA8 = 0x00, Reserved
 xB0 - 0xBC, reserved

@@ Line 227: / Line 227: @@
-== Bank 1 ==
+=== Bank 1 ===
 x3C = 0x32 should be reserved (0-6)
@@ Line 337: / Line 337: @@
- ===Bank 0===
+=== Bank 0 ===
 x05 = 0x00, DSP enabled