View source for X1 V7 Series Device Manufacturing and Programming Admin Documentation

==Factory - New Devices - Auto== 

Default application in Production Environment

<br\><br\>

==Factory - New Devices - Manual== 

password protected. the password is: '''idrive2man''' (no # like in the others passwords)

<br\><br\>

==Factory Tool RMA== 

password protected. the password is: '''idrive2#rma'''

Enter the serial number for the device and press enter

The following form will open displaying information about the device at the time of programming.

[[File:ft_rmaserinfo250.jpg|700px|]]

Click on the Continue button to proceed

<br\><br\>



===RMA Interface===

[[File:ftrmamode250.jpg|thumb|700px|]]

'''Auto Install''' - run all programming steps

'''Install Boot Loader''' -(Serial Cable in HDMI)

'''Install Kernel''' - (From SD Card)

'''Install File System and App''' - (From SD Card)

'''Device Config - AC Sync - Lens Focus''' - ( WiFi connection /internet connection to Admin Center)

'''Event Test - Transfer and Play''' - (WiFi Connection)

'''Settings'''

'''Back to RMA''' Return back to enter a new serial number


<br\><br\><br\><br\><br\><br\><br\><br\><br\><br\><br\><br\><br\><br\><br\><br\><br\><br\><br\><br\><br\><br\><br\>

==Idrive Development Mode==

password protected. the password is: '''idrive2#dev'''

<br\><br\>


[[File:setconfiginstall250.jpg|thumb|400px|]]

'''In Settings->Config and Install'''

3 options are visible only if you use the Idrive Development Mode

1. Device IP (for non-standard camera IP address)

2. Subnet Mask (for non-standard netmask)

3. Server IP (for non-standard base station IP address))

<br\><br\><br\><br\><br\><br\>


[[File:seteventstest250.jpg|thumb|400px|]]

'''In Settings->Events Test'''

3 options are visible only if you use the Idrive Development Mode

1. Validate the number of shock events (enabled by default)

2. Validate GPS connection in events (enabled by default)

3. Delete Events folder when form is closed (disabled by default)

<br\><br\><br\><br\><br\><br\>


[[File:setfactoryids250.jpg|thumb|400px|]]

'''In Settings->Factory IDs'''

1.) Factory ID  (Manufacturing location)

2.) Station ID  (Computer used for programming)

3.) Programmer ID (Programmer board in use)

<br\><br\><br\><br\><br\><br\>

[[File:setadmincenter250.jpg|thumb|400px|]]

'''In Settings->Admin Center'''

1.) MySql host

2.) MySql port  (3306)

3.) MySql user (root)

4.) MySql password  

5.) MySql database 

<br\><br\><br\><br\><br\><br\>

[[File:setftpasswords250.jpg|thumb|400px|]]

'''In Settings->Passwords'''

1.) Disable password requirement for '''ALL''' Factory Tool Modes

==V7 Programmer manual mode==

To use the manual switches on the programmer you need to enter manual mode using the following switch sequence:

Power switch -Off

Idrive ON_OFF switch-On 

Door switch -On

Test switch-On

all other switches-Off

Power switch -On

The manual switches will now function.

<br\><br\>

==Putty modes==

===View boot messages from idrive DUT===

download putty.exe : http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html

 
-Close factory tool software if it's open

-Connect the USB cable to Programmer ,when you connect the USB cable to PC a USB Serial Port (COM x) will appear in Device Manager -> Ports(COM&LPT)

-Double click on putty.exe and change com number to match the Device Manager one.

 

Speed needs to be 115200 , open connection.

Put the programmer in manual mode:

-Turn Off all switches including main power (SW1)

-Turn On this switches : Idrive_on_off(SW8),Door(SW3),Test(SW5) leave the other switches off

-Turn On main power switch(SW1)

-Turn Off Door and Test switches

-Turn On Ignition

Now Idrive boot messages can be seen in Putty.

===Manual Commands to V7 Programmer===

With no idrive device attached you can test commands to the programmer

type in the putty window one of the following commands and enter(you will not see in putty window what you are typing ):

idrive_on
 
ignition_on
 
door_on 

test_on 

alarm_on 

panic_on 

run install-kernel

run install-filesystem


these commands are case sensitive!

the programmer will confirm command with a beep ,in putty window you should see a confirmation message (ex. idrive_on_done ) and the corresponding LED should be on.

For the off commands use _off instead of _on (ex. idrive_off).


<br\><br\>