Idrive - User contributions [en]

Base Station Configuration Guide

2014-05-02T17:18:12Z

Robert: /* Idrive Base Station Setup */

='''General Guideline for Basic Base Station configuration with either MikroTik Groove, NanoStation2 or Ubiquity Bullet (3/17/14)'''=

<br\><br\>

==Basic Computer Documentation==

Unpack computer and document the following information so it can be tracked in the future. An example Dell system is shown and this information is available from the labels on the computer case.

*'''Model Number''': Dell Optiplex

*'''SVCTAG''': F8S2KL1

*'''Express service code''': 33182613685

*'''Operating System''': Windows 7 Professional

*'''Windows code''': CTRB2-38DT4-QGJCK-DHHPH-FHH3G

<br\><br\>

===Basic Computer setup===

(Local person Required)

Set up and turn on the system.

===Basic initial system identification===

The particular order and questions will vary depending on the system.

*'''Computer Name:''' Idrive_base

*'''User Name:''' Idriveadm

*'''Password:''' 111111

(password hint: six 1’s)

*Set windows to install updates automatically

::The computer should eventually come to a point where you can log in as Idriveadm

::Log on and verify internet connectivity

=='''Idrive Base Station Setup'''==

'''Install The Dell updates '''(you will be prompted for this the first time the system comes up).

'''Set Power settings''' so the computer will not shutdown on its own:

Start>Control Panel>System and Security>Power Options , Form the “Dell Plan” select change plan setting and under “Plugged In” set the “Put the computer to sleep” option to never. Select save changes

'''Set User Account Control (UAC) '''– Control Panel> System and Security>Action Center>Change User Account Control , Set track to “Never Notify” ( This is so the Idrive Transfer Tool will automatically start)

'''Set the Workgroup to IDRIVE''' Control panel> System >change settings

'''Reboot system''' ( after Dell updates complete)

'''Install Teamviewer '''Go to Teamviewer website [http://www.teamviewer.com/en/download/dyngate.aspx#version5 http://www.teamviewer.com/en/download/dyngate.aspx#version5] download teamviewer version 5.1.13999(multilanguage). Select Run, once downloaded select Install (Default) and click Next, Select personal /non-commercial use and click Next, accept license agreement and click Next, select Start Automatically with Windows, create a strong password and confirm it (#Idrv79p for example and keep it because it must be entered in the Idrive Admin Center) then click Next, select Full access and click Next, The program installs and click on Finish. The program will launch. In the window that comes up there is an ID number under “Wait for Session” (example 123 456 789). Enter the ID and Password into the AdminCenter as well as the idrive support Teamviewer account.

'''Activate Teamviewer License'''- At the top of teamviewer select Extras>Activate License. The license number is 09-31004-216139-269687

'''Set windows logon Allowed for administrators''' – Extras> Options> Security

'''Set Customer’s Time zone ''' -

Start>Control Panel> Clock, Language, Region>Date and Time>Change Time zone

'''Networks''' - One of the network connections will be for the Internet and the other for the idrive Wireless Connection. The Silver port should be used for internet, the black for wireless network.A label should be applied to the back of the system to identify each network connection

'''Internet connection''' should be set to automatically get its network addresses (DHCP). This should be good by default. Rename the connection “Internet Connection” Start>Control Panel>Network and Internet>Network and Sharing Center>Change adaptor settings, Right Click on the connection and select rename

'''Idrive Wireless Connection''' Start>Control Panel>Network and Internet>Network and Sharing Center>Change adaptor settings , Right Click on the connection and select rename. The Wifi router connection should be renamed to “Idrive Wireless Connection” . Done

Start>Control Panel>Network and Internet>Network and Sharing Center>Change adaptor settings, Right Click on the Idrive Connection and select properties, select “Internet Protocol Version 4(TCP/IPv4)”, select properties

Set up the IP address to 192.168.0.10, Network mask 255.255.'''0'''.0 , default gateway Blank and DNS servers to NOT automatic and blank settings.

Label each network adaptor on the back of the machine so the customer will know which connection is which. (“idrive wireless connection” “internet connection”)

'''Set Network Order''' – Ensure that the Internet network and not the Idrive network is accessed for the internet. Start>Network, select Network and Sharing Center, select Change Adaptor Settings, press ALT to make the advanced tab at the top appear, select advanced settings, in the connections window ensure that the internet connection is on top and the idrive wireless connection is second, click OK

'''Disk Partitions/ Raid configuration''' – Check to make sure the RAID 1 set is working. Intel raid manager icon in lower right corner

'''run Windows Update''':

Start>All Programs>Windows Update, Accept the agreement, check the boxes for: Recommended updates, Who can install updates, Microsoft updates. When finished restart system

'''Install Microsoft Security Essentials''' [http://www.microsoft.com/Security_Essentials http://www.microsoft.com/Security_Essentials] , select download, select run, select finish and an update will download and the system will be scanned. Set to full scan, Saturday

'''Show hidden icons in the Taskbar ''' Click on the arrow, select customize, Click show all icons checkbox.

'''Install Acrobat Reader''' - [http://get.adobe.com/reader http://get.adobe.com/reader] uncheck install google toolbar/chrome etc, select download at the bottom, Close download manager when done.

'''Set default web page to <nowiki>Idriveglobal.com</nowiki> – '''Launch Internet Explorer, depress the alt key to display tools, from tools select Internet Options, Set Home page to [http://www.idriveglobal.com www.idriveglobal.com]

'''Install VLC Media Player - ''' </nowiki>http://www.videolan.org/vlc/index.html</nowiki>

'''Install the Idrive desktop logo'''.''' Logo <nowiki>1.pn</nowiki>g''' – this is for the background for the desktop of the base stations. Copy it to a known location on the system. Right click on the desktop and pick Personalize, select Desktop background and browse to where you placed the Logo

'''Change account user picture to Idrive logo''' - Start>Control Panel>User Accounts>User Accounts>Change Account picture and browse to where you placed the Logo

(From Here down it is customer specific)

'''<nowiki>*For Demo Unit, Uninstall Any Pre-existing Idrive Software – </nowiki>'''for a returned demo unit, the software must be removed and re-installed to ensure the latest versions/updates.

Start>Programs>idrive>uninstall and click finish to safely remove software. Then go to control panel>hard drive>program files(86x)>idrive folder and delete the entire folder. Any setup or informational data in this file will be reloaded onto computer when control center is re-installed

'''Uninstall Microsoft SQL Server 2005 – '''Control panel> Programs> uninstall

'''Install Microsoft SQL server 2008R2''' –

Click on “New Installation”

Defaults for all questions EXCEPT for “Database Engine Configuration”. Set it to “Mixed Mode” and idrive2# for the password.

'''Install Latest Version of Idrive 2.0 Control Center - '''Before this can be run to conclusion you will require a Validation Serial Number (License). This is generated in the Idrive Admin Center. To install the Control Center double click <nowiki>download-file-idrive.zi</nowiki>p\idrive\<nowiki>setup.ex</nowiki>e click next, enter Validation Serial Number click Done.

'''Create Shortcuts to the 3 Idrive manuals on the desktop –'''

Base Station installation Guide http://wiki.idrive.pro/index.php?title=Idrive_Base_Station_Installation_Guide

Idrive Control Center 2.0 User’s Guide http://wiki.idrive.pro/index.php?title=Idrive_Control_Center_2.0_User%E2%80%99s_Guide

Idrive X1 Installation and Operation Guide http://wiki.idrive.pro/index.php?title=Idrive_X1_Installation_and_Operation_Guide

Organize Icons from left to right near bottom of desktop screen.

'''Copy The Idrive idrive.cert file to The desktop''' – Place it next to the manual shortcuts on the Desktop

'''Transfer ownership of the system to the customer '''–

[http://support.dell.com/support/topics/global.aspx/support/change_order/exception_tag_transfer?&~ck=anavml http://support.dell.com/support/topics/global.aspx/support/change_order/exception_tag_transfer?&~ck=anavml]

'''Remove previous shipping labels from the Boxes.'''

=='''WiFi Equipment Setup'''==

==='''MikroTik Groove Setup'''===

Use the default configuration files for configuration.

'''Detailed configuration instructions are available''' [https://admincenter.idrive.pro/wiki/index.php?title=RB_Groove_Configuration Here]

<br\><br\>

==='''BulletHP2 Setup'''===

====connections====

Attach the Antenna to the Bullet prior to powering on the unit!

The Ubiquity BulletHP2 is receives its power over the shielded ethernet cable (POE).

Plug a regular cat5 cable from the ”Idrive Wireless Connection” network port of the computer into the Lan port of the POE injector.

Plug the “FTP” (Foil Wrapped Twisted Pair) cable from the POE port of the Power injector to the NanoStation.

Plug in the POE adaptor into a wall outlet.

Verify there are lights on the unit.

====Network connectivity====

The factory default IP address for the Bullet is 192.168.1.20 . The idrive wireless connection interface subnet must be changed to for the initial configuration of the NanoStation

Start>Control Panel>Network and Internet>Network and Sharing Center>Change adaptor settings, Right Click on the Idrive Wireless Connection and select properties, select “Internet Protocol Version 4(TCP/IPv4)” ,select properties

Set up the IP address to 192.168.'''1'''.10

When Windows 7 detects the new network (wireless router) it will ask for the network type. Chose “Public”

configuration

Launch internet explorer and enter the address http://192.168.1.20

Login as ubnt with a password of ubnt

Network Tab

Network> Network Mode: Bridge

Network> Bridge IP Address: Static

Network>Set the IP address to 192.168.0.1

Network>Set the network Mask to 255.255.'''0'''.0

Network>Set the Default Gateway to 192.168.0.1

Network>Set The Primary DNS Server to 192.168.0.1

Network> Auto IP Aliasing unchecked

Click Change

Click Apply Changes

Change Idrive Wireless Connection settings back:

Start>Control Panel>Network and Internet>Network and Sharing Center>Change adaptor settings, Right Click on the Idrive Connection and select properties, select “Internet Protocol Version 4(TCP/IPv4)” ,select properties

Set up the IP address to 192.168.'''0'''.10

Launch internet explorer and enter the address http://192.168.0.1

Login as ubnt with a password of ubnt

Wireless> Wireless Mode: Access Point

Wireless> SSID: bwifi (these are case sensitive)

Wireless> check Hide SSID

Wireless> Country Code: (Default is USA)

Wireless >IEEE 802.11 Mode: G mode Only

Wireless> Channel Width: 20Mhz

Wireless> Channel Shifting: Disabled

Wireless> Output Power: 20DBM

Wireless> Antenna Gain: 9dB

Click Change

Click Apply Changes

System> Administrator Username: admin

System Password : idrive#

Click Change

Click Apply Changes

Log back into the Ubiquity Bullet with the new password

Test download from a unit.

==='''NanoStation 2 Setup'''===

[http://www.ubnt.com/wiki/AirOS-Quick_Setup_Guide http://www.ubnt.com/wiki/AirOS-Quick_Setup_Guide]

connections

The NanoStation is receives its power over the shielded ethernet cable (POE).

Plug a regular cat5 cable from the ”Idrive Wireless Connection” network port of the computer into the Lan port of the POE injector.

Plug the “FTP” (Foil Wrapped Twisted Pair) cable from the POE port of the Power injector to the NanoStation.

Plug in the POE adaptor into a wall outlet.

connectivity

The factory default IP address for the NanoStation2 is 192.168.1.20 . The idrive wireless connection interface settings must be changed to for the initial configuration of the NanoStation

Start>Control Panel>Network and Internet>Network and Sharing Center>Change adaptor settings, Right Click on the Idrive Connection and select properties, select “Internet Protocol Version 4(TCP/IPv4)” ,select properties

Set up the IP address to 192.168.'''1'''.10

When Windows 7 detects the new network (wireless router) it will ask for the network type. Chose “Public”

<nowiki>*If configuring a Nanostation2 that has been returned in a demo kit, reset the device by holding down the reset button for ~10 seconds, before adjusting Idrive connection properties*</nowiki>

configuration

Launch internet explorer and enter the address http://192.168.1.20

Login as ubnt with a password of ubnt

Network Tab

Network> Network Mode: Bridge

Network> Bridge IP Address: Static

Network>Set the IP address to 192.168.0.1

Network>Set the network Mask to 255.255.'''0'''.0

Network>Set the Default Gateway to 192.168.0.1

Network>Set The Primary DNS Server to 192.168.0.1

Click Change

Click Apply Changes

Change Idrive Wireless Connection settings back:

Start>Control Panel>Network and Internet>Network and Sharing Center>Change adaptor settings, Right Click on the Idrive Connection and select properties, select “Internet Protocol Version 4(TCP/IPv4)” ,select properties

Set up the IP address to 192.168.'''0'''.10

Launch internet explorer and enter the address http://192.168.0.1

Login as ubnt with a password of ubnt

Link Setup> Wireless Mode: Access Point

Link Setup> ESSID: bwifi (these are case sensitive)

Link Setup> Country Code: (Default is USA)

Link Setup >IEEE 802.11 Mode: G only

Link Setup> Output Power: 26DBM, check “Obey Regulatory Power”

20Mhz width

No Channel Switching

Click Change

Click Apply Changes

System> Administrator Username: admin

Current password: ubnt

System Password : idrive#

Confirm password

Log back into the router with the new password

Test download from a unit.

Base Station Configuration Guide

2014-05-02T17:13:35Z

Robert: /* Idrive Base Station Setup */

='''General Guideline for Basic Base Station configuration with either MikroTik Groove, NanoStation2 or Ubiquity Bullet (3/17/14)'''=

<br\><br\>

==Basic Computer Documentation==

Unpack computer and document the following information so it can be tracked in the future. An example Dell system is shown and this information is available from the labels on the computer case.

*'''Model Number''': Dell Optiplex

*'''SVCTAG''': F8S2KL1

*'''Express service code''': 33182613685

*'''Operating System''': Windows 7 Professional

*'''Windows code''': CTRB2-38DT4-QGJCK-DHHPH-FHH3G

<br\><br\>

===Basic Computer setup===

(Local person Required)

Set up and turn on the system.

===Basic initial system identification===

The particular order and questions will vary depending on the system.

*'''Computer Name:''' Idrive_base

*'''User Name:''' Idriveadm

*'''Password:''' 111111

(password hint: six 1’s)

*Set windows to install updates automatically

::The computer should eventually come to a point where you can log in as Idriveadm

::Log on and verify internet connectivity

=='''Idrive Base Station Setup'''==

'''Install The Dell updates '''(you will be prompted for this the first time the system comes up).

'''Set Power settings''' so the computer will not shutdown on its own:

Start>Control Panel>System and Security>Power Options , Form the “Dell Plan” select change plan setting and under “Plugged In” set the “Put the computer to sleep” option to never. Select save changes

'''Set User Account Control (UAC) '''– Control Panel> System and Security>Action Center>Change User Account Control , Set track to “Never Notify” ( This is so the Idrive Transfer Tool will automatically start)

'''Set the Workgroup to IDRIVE''' Control panel> System >change settings

'''Reboot system''' ( after Dell updates complete)

'''Install Teamviewer '''Go to Teamviewer website [http://www.teamviewer.com/en/download/dyngate.aspx#version5 http://www.teamviewer.com/en/download/dyngate.aspx#version5] download teamviewer version 5.1.13999(multilanguage). Select Run, once downloaded select Install (Default) and click Next, Select personal /non-commercial use and click Next, accept license agreement and click Next, select Start Automatically with Windows, create a strong password and confirm it (#Idrv79p for example and keep it because it must be entered in the Idrive Admin Center) then click Next, select Full access and click Next, The program installs and click on Finish. The program will launch. In the window that comes up there is an ID number under “Wait for Session” (example 123 456 789). Enter the ID and Password into the AdminCenter as well as the idrive support Teamviewer account.

'''Activate Teamviewer License'''- At the top of teamviewer select Extras>Activate License. The license number is 09-31004-216139-269687

'''Set windows logon Allowed for administrators''' – Extras> Options> Security

'''Set Customer’s Time zone ''' -

Start>Control Panel> Clock, Language, Region>Date and Time>Change Time zone

'''Networks''' - One of the network connections will be for the Internet and the other for the idrive Wireless Connection. The Silver port should be used for internet, the black for wireless network.A label should be applied to the back of the system to identify each network connection

'''Internet connection''' should be set to automatically get its network addresses (DHCP). This should be good by default. Rename the connection “Internet Connection” Start>Control Panel>Network and Internet>Network and Sharing Center>Change adaptor settings, Right Click on the connection and select rename

'''Idrive Wireless Connection''' Start>Control Panel>Network and Internet>Network and Sharing Center>Change adaptor settings , Right Click on the connection and select rename. The Wifi router connection should be renamed to “Idrive Wireless Connection” . Done

Start>Control Panel>Network and Internet>Network and Sharing Center>Change adaptor settings, Right Click on the Idrive Connection and select properties, select “Internet Protocol Version 4(TCP/IPv4)”, select properties

Set up the IP address to 192.168.0.10, Network mask 255.255.'''0'''.0 , default gateway Blank and DNS servers to NOT automatic and blank settings.

Label each network adaptor on the back of the machine so the customer will know which connection is which. (“idrive wireless connection” “internet connection”)

'''Set Network Order''' – Ensure that the Internet network and not the Idrive network is accessed for the internet. Start>Network, select Network and Sharing Center, select Change Adaptor Settings, press ALT to make the advanced tab at the top appear, select advanced settings, in the connections window ensure that the internet connection is on top and the idrive wireless connection is second, click OK

'''Disk Partitions/ Raid configuration''' – Check to make sure the RAID 1 set is working. Intel raid manager icon in lower right corner

'''run Windows Update''':

Start>All Programs>Windows Update, Accept the agreement, check the boxes for: Recommended updates, Who can install updates, Microsoft updates. When finished restart system

'''Install Microsoft Security Essentials''' [http://www.microsoft.com/Security_Essentials http://www.microsoft.com/Security_Essentials] , select download, select run, select finish and an update will download and the system will be scanned. Set to full scan, Saturday

'''Show hidden icons in the Taskbar ''' Click on the arrow, select customize, Click show all icons checkbox.

'''Install Acrobat Reader''' - [http://get.adobe.com/reader http://get.adobe.com/reader] uncheck install google toolbar/chrome etc, select download at the bottom, Close download manager when done.

'''Set default web page to <nowiki>Idriveglobal.com</nowiki> – '''Launch Internet Explorer, depress the alt key to display tools, from tools select Internet Options, Set Home page to [http://www.idriveglobal.com www.idriveglobal.com]

'''Install VLC Media Player - ''' </nowiki>http://www.videolan.org/vlc/index.html</nowiki>

'''Install the Idrive desktop logo'''.''' Logo <nowiki>1.pn</nowiki>g''' – this is for the background for the desktop of the base stations. Copy it to a known location on the system. Right click on the desktop and pick Personalize, select Desktop background and browse to where you placed the Logo

'''Change account user picture to Idrive logo''' - Start>Control Panel>User Accounts>User Accounts>Change Account picture and browse to where you placed the Logo

(From Here down it is customer specific)

'''<nowiki>*For Demo Unit, Uninstall Any Pre-existing Idrive Software – </nowiki>'''for a returned demo unit, the software must be removed and re-installed to ensure the latest versions/updates.

Start>Programs>idrive>uninstall and click finish to safely remove software. Then go to control panel>hard drive>program files(86x)>idrive folder and delete the entire folder. Any setup or informational data in this file will be reloaded onto computer when control center is re-installed

'''Uninstall Microsoft SQL Server 2005 – '''Control panel> Programs> uninstall

'''Install Microsoft SQL server 2008R2''' –

Click on “New Installation”

Defaults for all questions EXCEPT for “Database Engine Configuration”. Set it to “Mixed Mode” and User:sa the password to idrive2# .

'''Install Latest Version of Idrive 2.0 Control Center - '''Before this can be run to conclusion you will require a Validation Serial Number (License). This is generated in the Idrive Admin Center. To install the Control Center double click <nowiki>download-file-idrive.zi</nowiki>p\idrive\<nowiki>setup.ex</nowiki>e click next, enter Validation Serial Number click Done.

'''Create Shortcuts to the 3 Idrive manuals on the desktop –'''

Base Station installation Guide http://wiki.idrive.pro/index.php?title=Idrive_Base_Station_Installation_Guide

Idrive Control Center 2.0 User’s Guide http://wiki.idrive.pro/index.php?title=Idrive_Control_Center_2.0_User%E2%80%99s_Guide

Idrive X1 Installation and Operation Guide http://wiki.idrive.pro/index.php?title=Idrive_X1_Installation_and_Operation_Guide

Organize Icons from left to right near bottom of desktop screen.

'''Copy The Idrive idrive.cert file to The desktop''' – Place it next to the manual shortcuts on the Desktop

'''Transfer ownership of the system to the customer '''–

[http://support.dell.com/support/topics/global.aspx/support/change_order/exception_tag_transfer?&~ck=anavml http://support.dell.com/support/topics/global.aspx/support/change_order/exception_tag_transfer?&~ck=anavml]

'''Remove previous shipping labels from the Boxes.'''

=='''WiFi Equipment Setup'''==

==='''MikroTik Groove Setup'''===

Use the default configuration files for configuration.

'''Detailed configuration instructions are available''' [https://admincenter.idrive.pro/wiki/index.php?title=RB_Groove_Configuration Here]

<br\><br\>

==='''BulletHP2 Setup'''===

====connections====

Attach the Antenna to the Bullet prior to powering on the unit!

The Ubiquity BulletHP2 is receives its power over the shielded ethernet cable (POE).

Plug a regular cat5 cable from the ”Idrive Wireless Connection” network port of the computer into the Lan port of the POE injector.

Plug the “FTP” (Foil Wrapped Twisted Pair) cable from the POE port of the Power injector to the NanoStation.

Plug in the POE adaptor into a wall outlet.

Verify there are lights on the unit.

====Network connectivity====

The factory default IP address for the Bullet is 192.168.1.20 . The idrive wireless connection interface subnet must be changed to for the initial configuration of the NanoStation

Start>Control Panel>Network and Internet>Network and Sharing Center>Change adaptor settings, Right Click on the Idrive Wireless Connection and select properties, select “Internet Protocol Version 4(TCP/IPv4)” ,select properties

Set up the IP address to 192.168.'''1'''.10

When Windows 7 detects the new network (wireless router) it will ask for the network type. Chose “Public”

configuration

Launch internet explorer and enter the address http://192.168.1.20

Login as ubnt with a password of ubnt

Network Tab

Network> Network Mode: Bridge

Network> Bridge IP Address: Static

Network>Set the IP address to 192.168.0.1

Network>Set the network Mask to 255.255.'''0'''.0

Network>Set the Default Gateway to 192.168.0.1

Network>Set The Primary DNS Server to 192.168.0.1

Network> Auto IP Aliasing unchecked

Click Change

Click Apply Changes

Change Idrive Wireless Connection settings back:

Start>Control Panel>Network and Internet>Network and Sharing Center>Change adaptor settings, Right Click on the Idrive Connection and select properties, select “Internet Protocol Version 4(TCP/IPv4)” ,select properties

Set up the IP address to 192.168.'''0'''.10

Launch internet explorer and enter the address http://192.168.0.1

Login as ubnt with a password of ubnt

Wireless> Wireless Mode: Access Point

Wireless> SSID: bwifi (these are case sensitive)

Wireless> check Hide SSID

Wireless> Country Code: (Default is USA)

Wireless >IEEE 802.11 Mode: G mode Only

Wireless> Channel Width: 20Mhz

Wireless> Channel Shifting: Disabled

Wireless> Output Power: 20DBM

Wireless> Antenna Gain: 9dB

Click Change

Click Apply Changes

System> Administrator Username: admin

System Password : idrive#

Click Change

Click Apply Changes

Log back into the Ubiquity Bullet with the new password

Test download from a unit.

==='''NanoStation 2 Setup'''===

[http://www.ubnt.com/wiki/AirOS-Quick_Setup_Guide http://www.ubnt.com/wiki/AirOS-Quick_Setup_Guide]

connections

The NanoStation is receives its power over the shielded ethernet cable (POE).

Plug a regular cat5 cable from the ”Idrive Wireless Connection” network port of the computer into the Lan port of the POE injector.

Plug the “FTP” (Foil Wrapped Twisted Pair) cable from the POE port of the Power injector to the NanoStation.

Plug in the POE adaptor into a wall outlet.

connectivity

The factory default IP address for the NanoStation2 is 192.168.1.20 . The idrive wireless connection interface settings must be changed to for the initial configuration of the NanoStation

Start>Control Panel>Network and Internet>Network and Sharing Center>Change adaptor settings, Right Click on the Idrive Connection and select properties, select “Internet Protocol Version 4(TCP/IPv4)” ,select properties

Set up the IP address to 192.168.'''1'''.10

When Windows 7 detects the new network (wireless router) it will ask for the network type. Chose “Public”

<nowiki>*If configuring a Nanostation2 that has been returned in a demo kit, reset the device by holding down the reset button for ~10 seconds, before adjusting Idrive connection properties*</nowiki>

configuration

Launch internet explorer and enter the address http://192.168.1.20

Login as ubnt with a password of ubnt

Network Tab

Network> Network Mode: Bridge

Network> Bridge IP Address: Static

Network>Set the IP address to 192.168.0.1

Network>Set the network Mask to 255.255.'''0'''.0

Network>Set the Default Gateway to 192.168.0.1

Network>Set The Primary DNS Server to 192.168.0.1

Click Change

Click Apply Changes

Change Idrive Wireless Connection settings back:

Start>Control Panel>Network and Internet>Network and Sharing Center>Change adaptor settings, Right Click on the Idrive Connection and select properties, select “Internet Protocol Version 4(TCP/IPv4)” ,select properties

Set up the IP address to 192.168.'''0'''.10

Launch internet explorer and enter the address http://192.168.0.1

Login as ubnt with a password of ubnt

Link Setup> Wireless Mode: Access Point

Link Setup> ESSID: bwifi (these are case sensitive)

Link Setup> Country Code: (Default is USA)

Link Setup >IEEE 802.11 Mode: G only

Link Setup> Output Power: 26DBM, check “Obey Regulatory Power”

20Mhz width

No Channel Switching

Click Change

Click Apply Changes

System> Administrator Username: admin

Current password: ubnt

System Password : idrive#

Confirm password

Log back into the router with the new password

Test download from a unit.